When i turned my power steering left and right the level wouldn't go down with engine off. Then i started it , turned it left and right and it squirted out like a garden hose. 20 seconds till I shut engine off Then clamped/ attached the line and filled it . The level wouldn't go down.. Turning left and right the steering.level still full. Disconnect line and level won't go down when turning left and right while disconnected. do i start it again turn left and right?
This way only last's a little while and it will come back soon. Best way is to sand them down and clear coat them. I have tried both on mine and clear coat is way better.
Hello, please do I have to remove the whole shift knob if I just want to renovate silver plastic part? Is it possible to just release this silver part?
Que tal saludos cuantos botes de aceite necesita para llenarlo yo quiero hacerle el cambio de aceite de dirección y purgar ya que cuando giro el volante se siente como algo forzado la bomba del power no hace ruido pero si giro suben las rpm pero si sigo manteniendo el volante girándolo caen un poco como si se atorara el power quiero hacerle el cambio haber si mejora
Killer camera setups and editing. Helpful if you know the steps even without subtitles or narration. Guessing. It looked like a mix of gasoline and acetone in the clear spray bottle? 🫣 ... 🙂💜
Looks good now, but unless you seal it with some sort of UV protectant clear coat like they have from the factory, that won't last a year. Once you do it once, you'll be doing it over and over and over again... That's the problem with headlight restoration. It is temporary at best.
I was frustrated by how difficult it was to find out how much fluid to put in. The auto stores couldn't determine how much even with my VIN number, all the RU-vid videos had different amounts to add, not even an internet search could give me one option. You know how I found out, there was a decal on the transmission itself that told me how much to add (90oz or 2.8L). But to be honest, once I added the exact amount, it was the exact amount that it will start overflowing out of the fill hole. So I don't even think you need to know exactly how much... Just fill it till it starts pouring out the fill hole.