Nice review, thanks. How's it doing over time? I just get the 4400 4.2 GPM on sale for $599. It looks very similar to the Predator at Harbor Freight, but $300 cheaper with this sale. Also, 2 year versus 90 day warrantee. Hoping I made the right choice.
Great video. But one question you said you had to take the swing arm off. But it didn't look like you Did not Just curious cause i'm getting ready to do this to my Rancher
you just earned a sub. I'm sitting within 20' of that rack I used a ton with a 4 runner but now have a different suv and large roof rack for which I was going to actually do something like this! Thanks.. I'll post something about it when i do. ...it successfully..
Never had an issue until this resent quad i purchased. Could not get it to run unless it was switched to RES. I would always look in the tank and think. Damn. F$%&er has gas so i always just left it in RES. 😂😂
The Honda TRX300 was and still is the best atv ever to be manufactured. It's a real shame Honda discontinued them. The 300 will still be around long after mankind has been wiped off the earth.
I should add that it wasn’t this surface cleaner, it was a cheaper one with no wheels just the brush on the outside, the thing in the bottom sounded like the bearing was worn out maybe
I have a 1992 Sea-Doo XP that I just got and it fires right up after about nine months of sitting once I put a new battery in it and I just wasn’t sure if it was supposed to smoke that much but now that I see your smoking like that everything should be OK?
We have a 96 300 in service on our farm in the UK only machine that never broken down they are the terminators on the ATV world they are impossible to kill
Ran into this problem unexpectedly today. Nice relocation. I've noticed that it only needs 3/4" lift to fully clear the fairlead. I'll probably run some flatstock under it to create the clearance. Thought about routing out the decking to let the fairlead sit in the deck but I can see that become a puddle when it rains 😂
Funny dry humor" right to the problem kinda guy I like him no B.S. you ⏰🤑 saved me time and some money. I lived in Huston in the early 70's I'm in Nevada now think you very much kept putting out the video with that dry humor you remind of George Collins and I did his show when he was alive at the Bally hotel and casino in Vegas .
My co worker just had this problem on a Yukon XL nobody has the part but dealer they made her by both pieces of I known you could by this part I could have saved her a lot of money.
Is that the full suspension model of the mx350? If it is thn sell or thrownit away man. They might not be expensive in termsnof cash nowadays but theyre pretty rare to find, i myselfs wasnlooking fornone of this so i can get my sobrinios into dirt bikes since they have full suspension they tend to be alot more easier to mod if they end up growing up. I couldnt find someone at the time who was willing to trade since i didnt have cash and only my ps4.. i ended up finding a 2nd or 3rd gen model of the 350 i believe? Its the newer model with a frigid frame. The guy ended up trading since he didnt want it anymore because it would charge slow and batteries wouldnt really last. I traded my ps4 for his mx350 and when i gt home i fpund out the charging port connector wassnt hooked up to thw battery jaja, and you know what else? One of the batteries together with the controller didnt work, only the twots trhottle worked and the on off switch so i put my logical thinking intonit from what i learned in school to make a mini fan run off aa batteries and did the same to the dirt bike. I but the negative cable frpm the motor to the battery and thw positive cable from the motor to one of the switches positive connectors, the other positive connector got hooked up directy to the battery and now it works fine but it only works if you turn on the switch eaning itll only go if i flip the switch on and the only way to brake is to turn the switch off which will also turn off the bike jaja. I know its not the best mod but it did the job and it honestly does a really nice job, since it doesnt have the drum brakes or twist trhottle or controller hooked up to the batteries and motor it has less stress upon making it run somewhat fast and were talking about it just running on a 12v battery with the stock 24v motor. I myself weigh 143-150 lbs (my weigt changes between those 2 over time). The stock 24v motor supports up to 150 lbs and as i mentioned before it does a pretty decent job. I ride with my niece or my nephew on it when im able to in order to show them which is nice. Have to mention tho, it does goes somewhat fast on cement, brick, and the street yet it goes a bit slower on the dirt. Im trying to save up money for a 36v kit or at thw very least a 24v battery so it can run a bit faster on the dirt. Also trying to find a fromt suspension fork since the 2nd gen or new modelsnof the 350 only have support for front fork supension. As mentioned before it is a rigid frame which has no stock supension and if i want to give it a bit of supension without extreme moding i can just buy the front fork for it. Either way if anyone has any problems with theirs be free to take into my comment. Maybe just look up how to power up a mini fan with aa batteries and you will understand what i mean. Great video by the way
I ordered some gloss black for my 2018 sierra.i have almost identical center and pattern.does a balance weight cause a problem with them going on? I have like one weight on the outside of each rim.if I take the weights off shakey shakey.i hope it doesn't cause a pause.i mean hubcaps go on with weights,I used to back in 89 repair and sell tires at an amoco full serve in K.W.fla.I used to put hub caps on after balancing.take it easy dude great vid.😁 they are arriving tomorow..cant wait
@dogwalkerdavid7168 sorry for the late response. The covers come with clips around the outside that grab the rim. If there is a wheel weight in the way, you just remove the clip. That's what I did and have had no issues.
Hi brother, I’ve got a Honda four tracks as well. I changed the oil in it when I bought it a few months ago and overtighten the drain plugs tripping the threads on the inside of the oil pan. It’s a 17 mm boat. Do you have any clue of what I can go back in there with as far as a oversize bolt or tap or what kind of tools I would need to buy man. I’m just lost on this.
@@doitallgaragetx AWESOME! Thank you!! So do I look for an 18 mm plug for the oil pan if I have to drill it to an 18? I guess that’s pretty obvious that I would. My question is more of do they sell an 18 mm oil pan plugged for a Honda Fourtrax?
Yikes lol. My dumbass added dexcool when i bought the truck cause it was an oat, im learning lol. Draining tomorow and flushing and replacing with the zerex nitrie free hoat.
When you disconnect the line from the tank, when not use, does the line hooked up to the washer leak fuel? Also, can I leave the tank sitting on the ground? Will it still draw from the tank if the tank is lower than the washer? Thanks.
@nick32141 with these "boat type" fittings, they have a small check valve in them, so they don't leak when you disconnect them. If your machine has a fuel pump, it will draw fuel vertically. If it doesn't, it will need to be gravity fed.
@@doitallgaragetx I have an 8 gpm Honda washer that I just purchased waiting for the tank to come in from Amazon. My other washers all have their own tank over the top gravity fed. Was just wondering whether or not the tank can be lower than the washer. So I appreciate your information. Thanks.