I was at this event in Alabama. This was the best week to learn about this industry. Steve Li and the speakers were amazing! If they do this again in Alabama I will be there again.
Absolutely overdone and where is the handler with a jug smasher? Looks like clean out with 3 separate chem tanks would be a disaster. Why not leave the chem in the pre measured jugs and totes it comes in?
You lost me at “meter”. Never trust a meter. Chem comes in pre sized jugs for a reason. Cheap 60 gallon cone tank and the handler most farmers already own is more than sufficient
Hi there, could you please send me info concerning the interface and the software to use to Unblock the bateries, we have so many of them actually blocked, we try to finf the SDA and SCL points in the board, but has no success, thanks for your support.
Hi Sirs, thanks for the information concerning the Disassembled video, could you please tell me how to reset the battery ?, there is some special software to do that ? wich are the test poits SDA and SCL, to connect the board to a computer via I2C interface? thanks so much for your repply, we have many bateries blocked and need to repair them. thanks in advance for your cooperation.
On my what? Not in this life, I'll be able to have one of those, well i dont need it tbh. But thanks to you now I know how to setup the remote ID on a XAG P100 PRO through XAG app, might show this tho my grandma, she have some carrots, lettuces, etc in the back garden
Would it be possible to create a flight plan that looks something like this: go point A directly do the spraying at point A, go to point B directly do the spraying at B, go to C directly etc. import it to the controller and command the XAG drone to execute it? If not, I guess, it could kinda be simulated by making a very narrow virtual field section between A and B, a very narrow field section between B and C, between C and etc. Then marking a no-spray area that is almost the length of A-B section, so only spraying part is a small area very close to A and a small area close to B, repeat for B-C, C-etc. Such field and no spray areas will be generated automatically by a 3rd party software for the given A,B,Cs etc. points, so no need to draw those virtual fields by hand. Does that sound reasonable/doable to anyone, or maybe someone tried something like that? Alternatively do any of XAG drones have any Software Development Kits (SDKs) so a drone's behaviors can be customized with the software?
@@pegasusrobotics Thank you for the response, I saw the custom routes in the app (don't have the drone but the app allows to use the planning functionality without it), but is it possible to import/export those custom routes? I only see "Import fields" and "Import HD Map". The usage idea it to create a route programmatically using another piece of software and then import it into XAG ONE.
Would it be possible to create a flight plan that looks something like this: go point A directly do the spraying at point A, go to point B directly do the spraying at B, go to C directly etc. import it to the controller and command the XAG drone to execute it? If not, I guess, it could kinda be simulated by making a very narrow virtual field section between A and B, a very narrow field section between B and C, between C and etc. Then marking a no-spray area that is almost the length of A-B section, so only spraying part is a small area very close to A and a small area close to B, repeat for B-C, C-etc. Such field and no spray areas will be generated automatically by a 3rd party software for the given A,B,Cs etc. points, so no need to draw those virtual fields by hand. Does that sound reasonable/doable to anyone, or maybe someone tried something like that? Alternatively do any of XAG drones have any Software Development Kits (SDKs) so a drone's behaviors can be customized with the software?
