Technology reviews and unboxing videos I am based in the UK When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network and Amazon Associates.
I’ve bought one of these today. Apparently the settings are all quite low. I’ve heard that the ‘low’ setting is more of a ‘keep warm’ setting. Any tips?
Using the controller to set the thickness of the probe (at 08:34) it seems possible to modify it with steps of 1 mm only !! That seems very strange, could you please confirm ?
I have had mine for a couple months now and its been great. Now, all of a sudden the Y motor has decided its going to go in the wrong direction! Any ideas why it would suddenly decide to change its mind? I have made no changes to the machine in the time I have had it, but today it changed its mind... very frustrating!
If only one stepper motor is moving in the wrong direction, it is probably faulty and needs to be replaced. Also check the wiring and that the plugs are properly seated. If both stepper motors are moving in the wrong direction, you can fix that by changing the $3-Direction port invert mask setting. github.com/gnea/grbl/blob/master/doc/markdown/settings.md#3--direction-port-invert-mask
Exactly the type of review i was looking for. Amazing, thanks a lot! I have one more question, will it by possible to mount insta 360 x3 if I get 1/4-inch Mount Adapter?
Since I connected this NVR to my Sagemcom F@ST 3896 cable modem/router, I've noticed that my internet speeds are really slow. Is it possible to operate this without connecting it to the modem/router? I don't use the app.
Agree user manual is disappointing. I'm no tech guru but I have them working with default settings. Still trying to figure out couple thing have 2 camera that fog up every day and stay that way for hours. Then a different 2 cameras that dont take good night vision. When i get that set up i can work on alarms. though they were supposed to spot light dectected movement for better views.
No idea but try jogging the z axis by ( for example) 10mm or 1” and then measure how far it has actually moved. If it has moved the correct distance then measure the thickness of the touch plate and change the gcode to this value. Example: G92 Z14.95. For a height probe of 14.95mm. You can also type in each command individually and then check what happens. If the jogged distance is different then you need to recalibrate the z axis and change the grbl steps/mm setting.
Amazon amzn.to/3TOcVrb Banggood ban.ggood.vip/VDus WD Purple drive amzn.to/3PndSE5 These are affiliate links. If you click on one and purchase something, I might receive a small commission. It doesn't cost you anything extra, but it does help me to make more videos.
Hi there i bought this cordless screwdriver in 2018. I never used it and have just opened it up, its been 6 years. I tried charging it the light for the charging comes on but the cordless screwdriver isnt working. Can you help me please? Thank you
Thanks for video. I have the newer 4K cameras from hiseeyou. The interface is a little different but similar. Gave me the general idea on the setup. TY
