You saved me brother. Car keep having hard time detecting the key and won’t start. Now I don’t have to unplug the damm terminal every time. Car started just fine. Saved this video!
@@DeeKarbon 100% take your time and follow the steps I did not get it too work on the first couple times I tried It’s about timing… be patient and good luck
did you get fix I'm having same issue I copped a 2013 g37 journey and it have same codes and car goes into limp mode I cleaned MAF sensor throttle body changed sparks still doing it I haven't tried reset tho does it work?
yea my 2013 journey does this I thought it was jerking but I took It to someone and they said its in limp mode and my service soon is also on did this fix?
This content is truly exceptional. I recently read a book with a similar theme, and it was absolutely remarkable. "Reclaiming Connection: The Journey of a Digital Detox" by Joshua Ember
Not sure if it's placebo or not but my VQ37VHR feels so much better than before. Especially shifting from 2 to 3. Before it was extremely rough and now it's much more smoother. Took it out for a rip and in Sport Manual and Normal Automatic. Everything feels smoother. Seems like this ECU reset did some good. Thank you for showing the procedure.
From what I’ve read it adjust to new driving patterns so I’m sure it’s actually made it a difference. Exactly what I’m looking to happen to mines when I do this
You forgot the most important thing to tell people before starting this procedure. Make sure you turn off radio heater all accessories or this procedure will not work no matter how good you are with timing and timers. Once I found this out it works every single time.!!
Thank you bro my car was idling at 1100rpm..i was doing 60km for 15 liters of gas smh....after the mechanic replaced my valve covers... did this step by step now my car idles at 630 rpm or so 🙏
Resetting the ecu does a couple things like make your servicing light go away. It resets your idle. It also resets the air/fuel ratio temporarily if you just put in a cai. Sometimes it’ll learn and adjust the ratio on its own, sometimes it won’t.
This worked and my light cleared out. But will the light come back on again? Mine came on because the terminal was loose but I tightened it up and cleared up the SES light with these steps. So will the light come back on?