Nice! I keep putting off getting one as I fear a new version is around the corner. Do you feel it's going to be ok for the next , say four or five years?
Great walkthrough of your cart! I’m looking at getting one so seeing how you set your cart up is really helpful! I like the tripod hack. Hopefully the cart I get does the same 😉
@@shawnstoik I have a 100W Renogy right now. It’s open circuit voltage is 27V and it works great. I’m going to get the official DJI one from Zignes because it’s easier to transport. ( It does cost 3x for the same output so I’m holding off for now. ) I want something that can be folded and transported easier. My car is small 😂
Its called the MonMount6800B. I got it on eBay years ago but its still around: amzn.to/3WuEcAh eBay and Newegg has it too. The bamboo piece is a kitchen cutting board, that was the perfect size to hold my mid size PCs, and match with the desk. It is not a requirement, I just think it looks good so I added it to the mounts: amzn.to/4cAJzTP (Removed the rubber legs from the board and using it upside down)
This has been sitting in my RU-vid account since October of 2023. Realised I haven't actually posted this, I'm putting this out now! Thanks for watching!
This video was the first one I shot with the iPhone and the Rode Wireless GO II together. While I still have some unreleased videos with built in microphone recordings, all the future videos that I recorded after this one will use the RODE microphone setup!
Cool video man! about the staining on your woodtops, you probably put the monitor there before it was completley dried in? Then also, not sure how you stained over the clearcoat, that doesnt seem right to me, usually you do clearcoat at the end. Either way, if it was up to me, I would get mousemats to the same size as the tabletops, that way I wouldnt have to do much more with the tabletops. I love cleaning up setups, I went from multiple displays and now I only have the bare minimum, no cables no clutters etc. Best feeling in the world
The stain is factory, I didn't do it. I had this desk for about 4 years. Nothing has stained it before, so I have no idea what happened. It stained the clearcoat somehow, and I am afraid to do any crazy removal tactics because I don't want to scratch or matte it out. The shape matches the bottom of the monitor base, which has a black rubber/plastic thing on it, probably for slip protection but as it was sitting there for about a year, it stained. It almost looks like some dye, as it's not totally black, you can still see the woodgrain through it.
I am aweare that the built in mic in the iPhone is not great, so after shooting a few videos like this, I have decided to rebuy a Rode Wireless Go II kit and started using it on new videos. The next few will still be just iPhone audio, but I already have new videos uploaded with the new mic and the difference is very noticeable!
I am aweare that the built in mic in the iPhone is not great, so after shooting a few videos like this, I have decided to rebuy a Rode Wireless Go II kit and started using it on new videos. The next few will still be just iPhone audio, but I already have new videos uploaded with the new mic and the difference is very noticeable!
I am aweare that the built in mic in the iPhone is not great, so after shooting a few videos like this, I have decided to rebuy a Rode Wireless Go II kit and started using it on new videos. The next few will still be just iPhone audio, but I already have new videos uploaded with the new mic and the difference is very noticeable!
I am aweare that the built in mic in the iPhone is not great, so after shooting a few videos like this, I have decided to rebuy a Rode Wireless Go II kit and started using it on new videos. The next few will still be just iPhone audio, but I already have new videos uploaded with the new mic and the difference is very noticeable!
Joel just posted about the mentioned light on his channel! Check it out here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-wonEuMqhOCU.html&ab_channel=JoelGabrielsen
Sarah totally silently sneaked up on me in the intro section and I only saw her through the camera scaring me a little bit! :D Looking at the video now it almost looks staged, it fits in so well! Thanks for watching!
There are a handful of cameras that are compatible! A7SIII, A7IV, A1, A7RIV and possibly the A7RV. You need a compatible Smallrig cage, and the adapter plate: Smallrig MD4019 I'm using the Smallrig 3639 Half Cage for my A7SIII. That way you can lock the handle onto the cage similarly to an FX3/FX30 and it's secure! 4CH 24bit audio, CH1 and CH2 are the XLRs, and CH3 is the stereo jack that I use with the tentacle sync timecode box. Check the FB marketplace for handles, there are a lot for sale with good prices!
@@DavidMonostori thank you for this valuable info! I have the A7SIII and A7IV with smallrig cages and use the tentacle sync time system but I never liked using the y splitter cable to include an on camera shotgun mic. This just opens so much more capabilities to better and professional sound shotgun mics. I will put this into my "things to get" list for myself lol
I'm working with someone to CAD draw plans for CNC, based on the part I removed and measured. Until then we can at least order the part and fix it ourselves for under $75.
i Had the same clip break on my syrp genie II. Sent it back and they replaced! But this has been a huge problem since syrp was bought out by Manfrotto!
I had mine replaced twice but my warranty expires tomorrow. That's why I'm a little concerned , because out of warranty it will probably cost a lot. If I order the part myself , i can fix it from under $75. I just don't want to have another failure in front of a client.
I opened a new case with Manfrotto for the broken replacement item. Part of the issue is that they closed the original case when the replacement shipped. I had to wait 5 days for it to arrive, and since they closed the case I was unable to reply to it, and inform them that its broken. I opened the new case with the old case number included, detailing the situation, and they haven't responded to me in 13 days. The original RMA case was resolved within 72 hours. At this point I'm not too optimistic about this situation, and the more I look the more failed units I find. When I checked ebay earlier today, the only used listings all had a broken latch.
Got a reply today, they said they are slammed and asked me if I still need help. Obviously... Can't respond until Friday since I'm on location with clients in Arizona.
your presentation was spot on only problem is you got to "slow down" for folks like me as I had to watch several times to get the good message thanks for the information
Can this work even if you forgot your Microsoft password? Long story short I forgot my password and there’s no way to change it. I got a series s recently but I obviously can’t sign in to my old account because I don’t remember the password
