@@MesterD89 hey guck dir mal die anderen Kommies an. Da hat schon jemand rausgefunden welches Teil gut passt. Wir haben leider bisher keine genaue Nummer oder Marke herausfinden können. Alles was bekannt ist steht in den Kommies und ist im Video zu sehen
I just did this mod on my Optimus Polaris! Works like charm. Along with having installed the Quietstove Silent MUTER Damper Cap, It's a Wonderful Setup!
Cool. Note: I see these filters offered optionally in 310S stainless steel *or* FeCrAl alloy. I wonder whether the aluminum in the latter composition would risk galvanic corrosion with the brass. Hopefully the sellers don't ship the wrong version. Can't use a magnet to check for the steel version since 310S is non-magnetic. Any other handy way to check?
I think you dont need to see that so heavy. If the entire device would be made out of copper and the mesh out of aluminium, then yeah after a few days you would see the result 😂 I dont know the distance between brass and aluminium regarding the voltage potential, but it should be in some books. FeCrAi, Iron, Chrome, Aluminium Hmmm... Strange situation; i dont know a way to check it too but i think you can just try it with a strong magnet because the FeCrAi alloy is maybe a little bit magnetic. But the Ai part of the alloy is not that big (maybe just a few percent?) I would observe it time by time if there is happening any reaction. But if your cooker is always dry then i think it will take a long time to see anything
According to chatgpt 310s is more likely to cause galvanic corrosion on brass. However using a small piece of original pad as insulator between brass burner and metal pad would minimize direct contact between these 2 materials.
Primus do make a silencer for the less powerful omnilite, but not for the omnifuel & they have good reasons. Messing around like this is at best dangerous tinkering & that's being polite.
Thank you for the video! The 0.45 jet is for canned gas, not for white gas. White gas is a purified gasoline and is used with 0.3x-something jet. The gasoline from petrol station is cancerogeneous, so it's best to avoid it.
Has someone checked, if this nice gadget is the Campingaz Kocher Camping Micro Plus ? Sparrix, could you give us the dimensions of the gas burner (silencer), you are using? Thanks a lot!
Wow, very nice! Looks like mine. Maybe someone can check the exact measures of the micro plus out...in a hardware store? Width of my silencer is 4,25 centimeters and height is 3,3 centimers
Looks like the seller has no longer them to offer. But it was just a Part from a Camping-gas-burner. Maybe you will find one who will fit regarding the width and the lenght
Hi, I will buy another one. Cause i have to. Going on a 6 week trip through Armenia. Wich one do you recommend. The Omnifuel 2 or the Omnifuel TI ? The problem i also had was that the flame stopper constantly sprung away once it got hot. And no way to seat it well. So annoying. I do not care about if some water takes an extra minute longer to boil. Now with the Omnifuel 2 it is fixed with a spring. With the TI version it is not. But atleast when this also becomes a problem i could buy a TI silencer. Althour i do not care if it is being loud. Then i know it is still burning and you can guess the level of the burn. With the TI is that weak spot on the tube gone ?
The Omnilite ti has a reduced weight and and power, its for 1-2 persons. But its price is high, much higher than in 2020. The flamestopper of it is locked too, look exactly at some photos of the stove. Normaly the stopper should not jump away. to be honest i woundered until now why there is a spring 😂 You can bend the ends of the flamestopper a little bit, that prevents it from jumping away and makes it more stable. I never made the experience that the stopper is able to jump away, i didnt even know that this is a problem 😂 I bought the Omnifuel 2 because it has a higher power and a lower price than the Omnilite ti. But to be honest sometimes i really think about how it would be to have the Omnilite ti now here. What do you mean with the weak spot at the tube? Do you mean the connection between the tube and the part which you can screw at the pump? I didnt have a problem with this part yet for luck, but i have read about many buyers who loses petrol in this weak connection. Primus as a company definitly could be better. I dont like Primus very much, but i bought me the omnifuel and not the Optimus optifuel from catadyn because Primus have much replacement parts
Very nice video! I have the old Omnifuel. I noticed that on the newest there is no white filter where you connect the hose. Could you confirm that? On the old model there is also a filter there. I’m having some trouble with mine at the moment, and I’m thinking about maybe removing it, to ser if it helps. Hope you can answer me. Thanks!
Hi Sparrix, I stumbled across your video whilst vainly searching for an affordable silent burner solution for my Omnifuel (1st version) stove. Your idea and demo are awesome! However, I tried to buy one from the guy in Germany and his eBay site will not let me register as a UK resident. It blocks me at the telephone verification stage. I guess they are still hurting over Brexit? Have you seen these burner heads anywhere else? Or, know I can reach your guy in Germany? Cheers, brother...
The only way i know to contact the seller is via ebay "Kleinanzeigen". To be honest, i dont know if the page is only for Germany, Austria and Switzerland or for other countries too. That aside, i think even if you find a way to contact him, the shipping costs could be high because brexit. Maybe you can look at some outdoor stores or some cheap used Camping Gas burners which have the same essay who fits on the Omnifuel. Note: I dont know exactly why Primus named the Model Omnifuel 2. The only old Model if found is the Primus Multifuel 3. Maybe thats the old model? Or maybe Primus has made "silent" upgrades on his Omnifuel one time
@@mysony98 Hi Sparrix, Thank you for replying to my question. I've sent an email to a Chinese company that manufactures many types of burner heads. Hopefully, they will be able to match one up to the measurements I send along with some screen capture photos from your video. I tried an image search as well, without any luck! Thanks bud!
@@tartanrambo Make sure the flames coming out from the burner head are reaching and heating up the brass where the burner head lies inside. And that enough, even if your flamelevel is low. It has to heat up to evaporate the petrol. If not, the flames will start to get yellow and flickering around.
You can compare it with a normal gas stove. The boil time should be identical. But the boiltime itself depends on many other factors: water temperature, the type of the pot you are using, which Material, does it have a heat exchanger, what nozzle size is used in the cooking stove, does the pot has a lid on it.
@@bflmpsvz870 I tried to buy one from the guy in Germany and his eBay site will not let me register as a UK resident. It blocks me at the telephone verification stage. I guess they are still hurting over Brexit? Have you seen these burner heads anywhere else? I reached out to a Chinese company today that makes a whole range of these burner heads. Maybe I'll get lucky and find the source...
@@tartanrambo No hurt feelings over Brexit, Germans like money and business more than any other continental European I guess. I have not made my research yet, being in Australia, I am planning to contact the owner of this channel if I get stuck. How about that? I understood this could be any generic burner head that fits physical dimensions?
With the Silencer, its exactly like a normal gas burner. I didnt compare the time, but you can look at many other test around the web. It also depends on what cooking pot you have and what type of metal its made of. I have one normal pot made of stainless steel and a flat bottom, and one made of aluminium with a heat exchanger at the bottom (Optimus Terra Xpress HE). At the Optimus its much faster.
Of course, without Silencer there is much more Power. and you need much more petrol. But the nozzle ist also bigger. You need to change the nozzle to run it without the Silencer as you can see in the Video. I already tried it with the smaller one and it doesnt work right
Had the first one for almost 15 years or so. Fucking expensive and constant leaking. Got the pump replaced under warranty but the new one did leak also. But by then i could stick it where the sun does not shine. Due to the leaking it was sometimes very dangerous to use. Had to constantly watch it so i could immendiatly intervene. But one time the whole bottle start to burn with the pump. Had to let it burn cause it was to dangerous to get close. It did not explode but it was completely melted beyond use. I wish i could get another pump for it. Although the burner itself also has some designflaws itself. When the flamedispersor is getting hotter it will act as a spring and jumps from the burner. Is this V2 any better then the V1 ? Or is it more V1.01 ? It is a far to expenisive burner for all the troubles it gave me. Cause sometimes i really had to rely on it. And it failed 90 percent of the time.
Primus has many stoves. The older generation was called "Multifuel". This one had some mistakes. The newer one is the Omnifuel, the newest is the Omnilite ti. Until now, i had no mistakes with the Omnifuel, but one weak part is the tube who connects the pump with the burner. At the first end of the metal tube is a weak spot. In many cases it leaks there. And primus is not able to fix this problem and release a new tube for a good price, next to the bad customer support. In my case, i dont have a leak there yet and no other problems. Iam happy with the stove. One bad point is the burner mesh. But i dont buy other stuff from primus, because this company needs a transformation. The prices are too high, and the quality is not very good, if you look on the price. 150€ for the Omnifuel would be good. And the delivered bag for the Omnifuel is too big and too heavy.
@@mysony98 i think a have the Omnifuel. And it is indeed a lot of crap. No way i am going to buy another one from Primus. I paid a lot of money for one that does not work. And is dangerous also.
@@keesverhagen9227 I disassembled the complete stove and checked out every single sealing ring and part after i got the stove. Everything looks fine and works. what should i say... every part matches perfect together and works fine.. I just put a different type of fat to the sealing rings. I also heard that the old pumps were not sealed very good. You had to replace the pump at the beginning, using warranty so often until you get a good one. But if you had your stove for 15 years... That time is normal. I think after that time everybody buys a new stove or some replacement parts. The sealing rings get hard after so many years. And with different types of fuel, that process is faster. Its possible that primus made some parts better over the years.
I'm trying to find out if these can be used with alcohol. For some reason, it's not mentioned anywhere. I absolutely love the silence and total dependability of the Trangia alcohol stove, but the short burn time can be a bit annoying at times.
Which videos exactly? Videos for other Primus products? Currently i dont need more survival tools. And for other reviews, i firstly need a camera. I sold my old one
Yeah, because of that iam using a Silencer. If you start this stove in original condition on a campsite, everybody is looking at you because they think you want to start a jet plane 😂
Great video! One question: how about removal/replacement of the fuel filter? I don't think you covered that. Does the fuel filter unscrew from the rigid angled fuel line, or do you pry the filter material out from the brass casing? Many thanks.
Sorry for late reply, there was much to do in last time. The fuel filter is at the down of the little brass pipe where the fuel goes through. It looks like its not exchangeable, the filtermaterial is pressed in a little part made of brass. The filter is hard, but i dont know which material exactly it is. Maybe ceramic.
Sry, there is no link longer available. The silencer is just a modified gas-burner, but i dont know from which one it is. it was just a private offer from a men in germany
@@mysony98 much appriciated! Have you made any comparisons on the output with and without the silencer? Like boil time? And does it help with simmering? I think i will give it a go if you like it!
@@hampuslindvall9181 Because i use the 0,28mm nozzle with the silencer, the petrol-usage is low. Boiling time is a little bit longer. But i tried it at home with a special pot from optimus with a heat exchanger. There the boiling time was fast. But i didnt make a test or a comparison, because the boiling time doesnt matter at all. Without the silencer and the 0,37mm nozzle, its clear that boiling time is very fast. But it costs more petrol.
Hi. Great vid thanks !! At 12.12 you mention 0.45 for white gas. I thought the 0.37 is for white gas or unleaded petrol and the 0.45 is for gas cartridges ? Cheers. Dave
White Gas and Gas cartridges are the same... i think. On the official description it says 0,45mm are for gas. It depends on you. I just used normal petrol until now. Without the Silencer, the 0,37mm is perfect. However, the 0,25mm nozzle is too small for petrol....with the exception of the Silencer. There it runs perfect with petrol.
@@mysony98 Suspect its just different terminology around the world. I'm in New Zealand so definately different terminology here to Europe or States. Primus web site states OmniFuel: Cartridge Gas 0.45 mm, White Gas (or leaded) 0.37 mm, Paraffin/Kerosene or Diesel 0.25 mm .
@@davecochrane8368 Yeah, maybe there are some differences in some countries regarding the translation or other influences. But as i said, i dont know more. I used the Omnifuel only with normal petrol until now.
@@mysony98 All good. Thanks for the vid - very informative. I have just got my Omnifuel 2 and plan to run it on Colemans Fuel but as we are on Covid Lockdown in Auckland at present , i will have to wait until i am allowed out to get some..... :(
@@davecochrane8368 In my Country, much people give a fuck on this silly useless rules. But there are still many sleeping sheeps overall here who want to get vaxxed until they are dying from this shit.
Thank you for your wonderfull test. I have the last MSR whisperlite, i broke the priming pad too but this priming pad is made of metal mesh. Really fragile once, it has burned. You only get one per maintenance kit, at least at primus everything is available by the piece on their website. When I see the stove, a lot of little details make me feel that it is more premium than my whisperlite. The integrated cleaning needle has never really saved me from a real nozzle cleaning.
On your video, The ergopump has the black color NRV cap. but all other my recent primus have the red color nrv cap, exceptionally my new omnifuel 2 year21 that is same as this video. This is strange, Recent (means since around 10years from now) Primus ergopump should have the Red one... do you have any idea about this? Meanwhile, the Priming Pad quality is really horrible that I think so. It is piece of shit really.
The red cap is only in the old stoves of Primus, the Multifuel EX. The newer Model, the Omnifuel has the black one and looks a little bit different. I made another video for the priming pad, link im comments. There is a much better replacement for this.
@@mysony98 if I wasnt wrong the current ergopump 732231 all is having a red cap holder for nrv. The bottom of pump tube. Even the Primus catalog 2021 shows the same, red, and other mines too. Very recent Primus official maintenence RU-vid videos also show the red cap for ergopump with LV. (Not for the varifuel's) Regardimg the Priming Pad, I am using just a piece of carbon felt instead, or fiberglass rope but this makes some dusts so. primus.us/products/ergo-pump-replacement?variant=29444477321299 (Not for Varifuel's) Thank you for yr comments!!
@@ypkr In comments of the product page somebody is saying that the difference is the possibility to replace some parts of the newer pump, if there is a broken part or something else. Maybe the red cap version doesnt have the thin metal plate on top, which is fixed with a screw?? classiccampstoves.com/threads/primus-himalaya-series-fuel-pumps.22603/
@@mysony98 I saw that ccs article, it has many variation of ergopumps. The rightest one is that I knew as the last version, red nrv cap. However The very recent omnifuel 2 has a black nrv cap, yet not as the ccs article's 4th one(that is not having lindal valve). Afaik the black nrv cap was existing for very first version of Omnifuel which was shaped as ufo style bell cover. Your very new pump with a black cap revision may still have the tiny screw on the top clip in order to hold firmly the lindal valve part. Meanwhile I've been waiting for a reply from Primus usa, then I will update here what she says. Elder versions, Aluminium blocks, are not considerable for this case.
@@mysony98 I'd like to note this I've got the reply from Primus usa today; "The Ergopumps might have either the red or black end but otherwise are the same." Still strange but up to now I don't have any further information. Thanks!
I have you a sub just because you went through some awesome tests and gave us some links and was very thorough and thoughtful when you didn’t have to be. Thank you for that. I’m looking for a MSR whisperlite alternative because I’ve heard the pumps are fragile because they’re plastic so I’ve been looking at the Primus. This really has been enjoyable. Thank you.
mysony98 Nun hab die 2Gang Hydro drive und mein Keilriemen ist Schrott und ich bekomme die Kupplung und alles andere net Runter. Den Keilriemen somit auch nicht, habe auch nur wenig in den Foren gefunden. Wenn du Insta hast, schreib mich mal an IG: MarvinRazor
