$143 DIY Overland Onboard Air Install - Jeep TJ

Подписаться 106 тыс.

Просмотров 59 тыс.

50% 1

In most of my overlanding trips, I usually air down when hitting the trail, but that usually makes airing up a little more annoying, even though I have a compressor. In this project, I wanted to give my portable air compressor a permanent home under the hood so I wouldn't have to lug it in and out of the vehicle and connect it to the battery each time. In the engine bay of my Jeep TJ, there was a perfect spot where the washer fluid reservoir used to be and I put my air compressor into its place. It's been working perfectly ever since and I highly recommending going this route if you want to save some money. Happy wheeling! - Grant
FULL PRODUCT BUILD LIST ($143.00 Total)
Master Flow Tsunami Air Compressor ($102.00)
www.amazon.com...
Air Hose ($14.00)
www.harborfrei...
Coupler Connector Kit ($9.00)
www.harborfrei...
Female Brass Coupler ($5.00)
www.harborfrei...
Locking Tire Chuck ($4.00)
www.harborfrei...
Mixing Board ($9.00)
www.harborfrei...
COOL MERCH:
domelife.camp/
Follow me on Instagram: @grizzy.gram 📱
________________________________________________________
ARKANSAS OFFROAD MERCH 👕
www.longcreeko...
ARKANSAS OFFROAD COFFEE ☕️
www.longcreeko...
OVERLAND GEAR & ACCESSORIES 👨‍💻
backwoodsadven...
GUIDED OVERLAND TRIPS 📍
www.expressrall...
________________________________________________________
⬇️⬇️⬇️ GEAR & COUPON CODES ⬇️⬇️⬇️
BACKWOODS ADVENTURE MODS BUMPERS 🇺🇸
backwoodsadven...
Coupon Code for 10% off: ARKOFFROAD
PATHFINDER LIGHTING 🔆
backwoodsadven...
Coupon Code for 10% off: ARKOFFROAD
ROCK ROOSTER BOOTS 🥾
rockroosterfoo...
Coupon Code for 15% off: ARKANSASOFFROAD
BLACK OPS THROTTLE GRENADE ⚡️
blackopsoffroa...
Coupon Code for 10%-20% off: BOOMGRIZZY
REVOLUTION RACE APPAREL 👖
www.revolution...
Amazon Prime 15% off code: 15OFFROAD
bit.ly/RRPLAYG...
HIBOOST 4G CELL BOOSTER 📶
www.hiboost.co...
Coupon Code for 20% off: grant20
BOUGE RV FRIDGE/FREEZERS ❄️
Coupon Code for 25% off 53qt Fridge: ARKOFFROAD
bit.ly/3q0Sbvi
Coupon Code for 15% off 30qt Fridge: ARK15
www.bougerv.co...
Coupon Code for 15% off ANY Fridge: ARK15 www.bougerv.co...
BLUETTI AC200P🔋
www.bluettipow...
Coupon Code for $185 off: Arkansas200p
BOUGE RV FRIDGE/FREEZERS ❄️
Coupon Code for 25% off 53qt Fridge: ARKOFFROAD
bit.ly/3q0Sbvi
Coupon Code for 15% off 30qt Fridge: ARK15
www.bougerv.co...
Coupon Code for 15% off ANY Fridge: ARK15 www.bougerv.co...
For daily updates, video clips, and photos, check out my Instagram:
@grizzy.gram

Опубликовано:

15 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 206

@keithlea6804 4 года назад

If those rubber feet dont stand up to being hard mounted get a rubber hockey puck and a 1 inch hole saw . They held up in north Dakota winter over 5 years and 2 different compressors. I ran a short hose off the compressor and hard mounted a coupler to bumper by the winch. Rewired the switch to a toggle in the cab . Dont have to open the hood every time you air up . If you ever see a propane converted pick up in the junk yard look along the frame rails for two tankes that are around 8inches round and 30 inches long. They make excellent air tanks and fit real nice under jeeps. Just some thoughts from some of my air systems.if you ever think of using an AC compressor for onboard air look for the mid 70 dodge twin stage AC compressor. They put out 210 psi all day long. No need for air storage tanks. 👍

@vittoamp 4 года назад

You got me building my stock TJ into an overland build. Thank you for the inspiration. Please continue the videos!

@ArkansasOffroad 4 года назад

vittoamp You’re very welcome! Glad to hear you’re inspired!

@markblandford9346 4 года назад

I always enjoy your videos. I like the way you improvise, instead of always just going out and buying the latest mod, like some youtubers do. Looking forward to your next video, as always.

@ArkansasOffroad 4 года назад

Mark Blandford That’s the idea. I like coming up with my own solutions. Usually does the job just as well as the expensive stuff. Thanks for the support!

@crippleshot4810 4 года назад

The filter from the VIAIR compressor is made of metal and is the same size threads and dimensions. Available on the web site and fairly inexpensive. I have the same compressor as yours and my filter broke almost immediately so I replaced it with the VIAIR one. No problems since. It’s also chrome. Looks cool on the red pump.

@stantheman9002 4 года назад

With that compressor, I've seen people run a piece of air hose and put the air filter in the cab of the vehicle. It might be a fairly easy way for you to not have to worry about it breaking due to engine heat while also keeping it in a more dust free environment. I've been running the same compressor for about 4 years now with my only complaint being how hot it gets. Now I want to mount mine in my Tacoma for on board air.

@rickclement9439 3 года назад

I have that same compressor and I did what you were wanting to do. I took the head of the compressor off Re-drilled and re-tapped it for the proper thread for Quick connect

@ayayron7776 4 года назад

Favorite Off-road channel please keep the videos coming

@ArkansasOffroad 4 года назад

AY AY Ron Wow, thank you!

@TheAtvRider90 4 года назад

I would run hard lines to the front and rear of the Jeep and have quick connects to connect a shorter and smaller coil hose to. This would save space in the Jeep and make airing up and down a little easier. Also, if possible, I would run the compressor to an interior switch so you don’t have to open the hood.

@CodyandKellie 4 года назад

I have a small compressor that we have carried around with us for a long time, and always disliked the fact that it took of storage space. This is a great alternative! Will definitely be looking to do this in our rig. Also, thank you for the shout out!

@ArkansasOffroad 4 года назад

Yeah same here. I hated getting it out of my storage space, using it, and putting it up. Glad you like it! And no problem!

@BrianDavisAwesome 4 года назад

I've had this same compressor for about 10 years, I almost installed it in the same area in my TJ. But I just kept it in a bag. I carry it in my JK now. I saw a review on that compressor somewhere a few years ago and it was rated very well. Thanks for the video, now I am thinking about mounting it in the jk.

@ArkansasOffroad 4 года назад

Awesome!

@ArkansasOffroad 4 года назад

Also, I forgot to mention that this compressor does have an inline fuse already built in. It's about a foot down on the wire from the compressor. When I tucked the wire away, it was out of the shot so nobody could see it. Thanks to those for noticing that! - Grant

@MosStephResell 4 года назад

Arkansas Offroad thank you for doing this. Why did you need a fuse? I have a husky air compressor I can plug into my cigarette lighter and I was attempt this project

@ArkansasOffroad 4 года назад

@@MosStephResell It's a safety precaution. The fuse will break, killing the power to the compressor rather than if something goes wrong with the compressor the line being live still. And if I'm correct, your cigarette lighter should have its own fuse.

@twistedlv 4 года назад

@@MosStephResell Ideally you want the fuse right at the power source, in case you rub thru or nick a wire somehow. Cigarette lighter wiring is pretty small guage, and can get really hot when using something like a compressor. I always use the battery clamps when using my little Viair. Larger wire=less resistance.

@MosStephResell 4 года назад

Arkansas Offroad thanks for the reply. Specifically, I have a husky tire inflator and it has a fuse inside the inflator. I don’t have attachments to attach to the battery terminals, just one going into the cigarette lighter. I’m just gonna have to purchase the one you have or something similar that attaches to the battery terminals.

@MosStephResell 4 года назад

twistedlv thank you for this info. I have a husky tire inflator, I’m sure the wires are smaller like you said compared to the ones that attach to the terminals.

@mr.bluegrass9723 4 года назад

I'm empressed in your knowledge of designing and making it . congratulations

@ArkansasOffroad 4 года назад

Thank you!

@mariodesmo 4 года назад

I did almost the exact same thing on my TJ about 10 years ago. Except I mounted my compressor on the passenger side. There is a couple of boss's on the engine block between the oil filter and alternator area, and they're already drilled and tapped. I simply mounted a similar "L" shaped mounting bracket to the block. One piece of advice, I installed an air tank and that was a complete waste. It took longer to air up with the tank since I was not only airing up the tires but also the tank so I removed it. It actually took me longer to air up when I had the air tank. I get similar air-up times with mine, about 1 minute per tire. I run 15psi on the trail, and about 26-28psi on the street depending on how the tires wear. Good Luck!

@cesarnyc 4 года назад

Have to hand it to you, you are excellent in using space in the most efficient and innovative way, your videos are very valuable, thanks for sharing.

@ArkansasOffroad 4 года назад

Thank you!

@Logan-te3iq 4 года назад

You live such a blessed life bro keep it up just got a Tj ready to go exploring and living my life just like you.

@ArkansasOffroad 4 года назад

Right on! That's awesome, thanks so much.

@jeeper426 4 года назад

for your air cleaner for the compressor, run a hose to the factory airbox from the inlet side of your compressor, that'll draw air through the filter in the airbox and keep debris out of the compressor, nice build man, pretty good idea, i've got a compressor i picked up a year or two ago from autozone that i was looking to do something similar with on a '91 XJ

@ArkansasOffroad 4 года назад

Good idea, thanks!

@wang576 4 года назад

Nice and fun project, I installed 2 air compressor into my 18 4rnr as well, easy peasy, zip tie-men’s best friend 😁

@tangledline 4 года назад

Nice. I have the same setup but with limited space in a TJ...I put mine in the corner behind the rollbar. I then wrapped the air hose That heavy duty coiled one wraps good around the roll bar itself.

@joerockme7485 4 года назад

DUDE YOU ARE ONE COOL CAT !!!!! THE BEST IDEAS ! ....SEE YOU ON THE NEXT !

@ianmburke 4 года назад

Awesome info especially the hose size vs inflation time

@chrismc.893 4 года назад

I have the exact compressor, Masterflow Tsunami, works great, has never let me down, thanks for the idea!!! My JK has little room under the hood, wish me luck haha!

@ArkansasOffroad 4 года назад

Awesome!!

@charlesmcneilljr6080 3 года назад

i need to do this mod. awesome idea and craftsmanship. thank you

@bloopmcgroober2580 4 года назад

One of my favorite RU-vidrs for sure!

@ArkansasOffroad 4 года назад

Much appreciated!

@garyhoskins2798 4 года назад

INSPIRATION: Inspiration comes from many things in life and it is amazing RU-vid can connect people from around the world. Though we live in different states (I live in Washington State) you my friend inspired me to keep to the path - the 4x4 path. Its March 2020, I tuned into your videos about two and a half weeks ago (Feb.2020). Perfect timing to, I was starting to feel a little blah about my '99 tj. I've been known to say "a jeep is ever changing" it is the one vehicle that can change its look when ever the feeling hits you ($$$) ;) Keep posting, and I am looking into jumping onto the RU-vid band-wagon this spring or summer.

@ArkansasOffroad 4 года назад

Thank you so much!

@Andrew-dg7qm 4 года назад

I installed this today in the empty spot where the AC compressor would have gone. Thanks for the parts list and the idea. So glad i already had the compressor. My only complaint is the hose is stinky and I’m not sure I want it in the cab

@ArkansasOffroad 4 года назад

Awesome! Glad it worked out. Yeah it does have a smell.

@83SquareK20 4 года назад

Appreciate your videos and the wealth of knowledge you share!

@geoffersongeofferies477 4 года назад

Another great idea and solid execution. I wish I had that much room under the hood of my JK.

@tylerm97 4 года назад

Great video! The only thing I would say is you have to put a fuse if your compressor burns out or the positive lead grounds out....you will burn up that Beautiful Jeep!! 15-20 amp fuse will work fine. Even if you did a 30 amp fuse anything is better than no fuse!! I’ve personally seen 2 people burn up their rigs because they didn’t use fuses on their aftermarket parts.

@ArkansasOffroad 4 года назад

Good looking out! I do have a fuse already wired up. Thanks!

@MLXX2000 4 года назад

Nice vid man! The Tj looks sick, I’ve got a YJ but you have me inspired to do this!

@ArkansasOffroad 4 года назад

Nice!

@12faviker 4 года назад

Hey What did you do with the washer fluid tank?

@JeepTJWheelin 4 года назад

You just gave me a great idea. Going to be installing a Thor Cowl TJ cai. This allows for removing the entire air box housing. That's where my Viair compressor will be going. O///////O 🇺🇸 JEEP ON 🇺🇸 '41 - '06

@Andrew-dg7qm 4 года назад

I like this idea. I’ve had the same compressor, probably longer than you, and I need gloves or a rag for the hot components. I need to do this...and hopefully the mount as well. I don’t mind taking the compressor out, and I have my air tools in the passenger grab bar bag, but anything I can do to make lower the hassle factor=👍

@charlespeel7078 4 года назад

Great video, I've been watching you for sometime now. Have you thought about water getting in your engine compartment? I'm in Geogia, there is a lot of river crossing there. I dont think mounting in my engine would work. I am thinking in the back might be an area for me. I have the same pump and it's great.

@AddictedToJeepsCom 4 года назад

Awesome idea! I wish our JK had room under the hood! Hmmmm, maybe I can mount ours in the trunk of our Jeep, in that center cubby under the carpet....

@AndrewBrowner 4 года назад

got a good deal on a 3000watt inverter so gonna run that with a 120v air compressor, might have to seperate the compressor head and tank for better packing in the jeep, i do alot of trade work almost as a hobby so having 120v power for tools and air for nailers in the jeep on offgrid locations will be useful!

@ArkansasOffroad 4 года назад

Nice!!

@rustybottoms8859 4 года назад

Great job! Good use of space. I will definitely consider adding to my TJ. Question, is there a fuse of any kind on the power wire going from the battery to the compressor? Also just an idea, as I got more and more wires going to my positive terminal on the battery I went to a marine style battery end and eventually a power distribution block. Aka busbar. Keep up the low buck ideas. 👍

@KellyBarnes 4 года назад

Awesome set up. You definitely want to get a cap for the air outlet, we have problems with mud daubers clogging up our air hoses, if left uncapped. 👍

@ArkansasOffroad 4 года назад

Yep, already did. Thanks!

@theinventor5361 4 года назад

Hey mate what did you do with your washer fluid bottle, did you relocate it?

@famous140 4 года назад

Right on...clean jeep bro!

@bigboyfranks7524 4 года назад

Hey brother! Great video and I like the idea on the air compressor and where to mount it! I’m going to do the same on my F-150. Thanks for the idea and till the next video this is Big Boy Frank from Texas Peace out ✌️

@ArkansasOffroad 4 года назад

Thanks Frank!! Sounds awesome.

@_JEBUS Год назад

Nice install i would suggest looming your wires tho as an added measure of protection. Things get hot under the hood of a jeep.

@tombuckley4600 4 года назад

Great video and nice install. Clean and classy, nice fit!

@ArkansasOffroad 4 года назад

Thanks!

@BerniesBastelBude 4 года назад

I really admire your technical skills and I'm impressed what you can mount on a small TJ! If you would replace your softtop with a Bestop Supertop (what I have) it may add little bit more room in the back (for your dog).

@ArkansasOffroad 4 года назад

Thank you! Yes you're right. Not having a fast back top would give me some more room, but I do like the look. Plus my roof rack was built to the same angle as the fast back soft top.

@Cody_1776 4 года назад

So what did you do with your windshield washer fluid container? Relocate? Eliminate? Another great video man, nicely done!

@keithgabel755 4 года назад

I am wondering the same thing as I can’t imagine not having mine to wash the windshield just whenever.

@ArkansasOffroad 4 года назад

Never had one in there since I’ve owned the Jeep. Honestly never needed it anyway.

@Bluelightbandit 4 года назад

Great job! I'm jealous that your work bench is cleaner than mine. New sub! 👍

@ArkansasOffroad 4 года назад

Lol thanks!

@KyleSVT 4 года назад

Great video bro!

@ArkansasOffroad 4 года назад

Thanks Kyle!

@313Leeland 4 года назад

Mounting the Air compressor under the hood has one big draw back Heat. The Air Compressor has an overheat protection for running too long, now mounted under the hood the compressor gets "pre heated" by the engine and cuts out sooner especially in hot climates.

@David.Gonzalez82 4 года назад

Dope! Keep the videos coming. How about once a week? Haha 🤟

@ArkansasOffroad 4 года назад

Thanks! I'd love to, but I just don't have the time at the moment.

@daveh7945 4 года назад

run a hose from the air filter on the the engine to the inlet on the compressor. that way you don't need to mess with the flimsy plastic filter. it shoulkd be some easy plumbing and maybe $20 in parts

@Tyler91056 4 года назад

Being that bracket you made was aluminum, you'll need to go ahead and replace the grinding wheel you used to take the edges off after you cut it. If it was a standard grinding wheel, it more than likely got loaded up with aluminum and could possibly fragment. So be careful if you use it again 👍

@ArkansasOffroad 4 года назад

Thanks for the heads up!!

@Tyler91056 4 года назад

@@ArkansasOffroad sure thing man! Love the videos and ideas you're sharing. Working on a TJ myself and your videos really open my imagination to what I can do for my build. I'm a machinist so I'm hoping that will come in handy. If you need any help with metalworking please do shoot me any questions. Would be more than happy to help.

@zschlecht08 4 года назад

As always love the vids man. Thanks for making them

@ArkansasOffroad 4 года назад

Thank you!

@Ryan_Tidwell 4 года назад

Great video. Personal experience tells me you might not be as excited about the spring loaded tire chuck after you have used it a few times and it won't stay on anymore. I'd keep the screw on one just in case. I've gone through 4 of the HF tire chuck with lock on lever and they don't last for me. I have been looking for a location for my compressor for a while. I hope my install turns out as great as yours. Nice job.

@ArkansasOffroad 4 года назад

Appreciate the advice. I'll definitely keep the other screw on adapter just in case. Thanks!

@PawanKumar-cq4el 4 года назад

Hii I'm pawan from India🇮🇳 and I like your jeep

@411whatever1 4 года назад

Where did you get the air compressor with the battery jumper connections awesome idea

@josepholiveri8546 4 года назад

Nice video. Simple and to the point. I am concerned with you having water egress into the compressor electric motor. I think a simple plastic box would cure that issue. Also have you considered adding a pressure switch and possibly a small tank. I was thinking that a couple of feet of 1.25 -2.00 inch PVC mounted under the carriage then plumbed up to points near the front and rear bumpers would work. Just a thought... good job.

@ArkansasOffroad 4 года назад

Appreciate the ideas!

@keithgabel755 4 года назад

Great video, as always, and I’ll be looking under the hood tomorrow to see what sort of space I have to use. Have also been looking at power distribution systems from Rugged Country and sPOD (examples). Have you considered anything like that for control of your lights and now the compressor? With your eye for DIY and budget will be interested to see what you use, if anything. Thanks for your efforts and videos!

@ArkansasOffroad 4 года назад

Keith Gabel Thanks! I’d love an SPOD, but they seem pretty expensive. I’ve looked at making my own power bus. I don’t really plan on adding any more electrical systems anyway, so I might keep this setup. Maybe look into making your own power bus. Might be a good option. Thanks for the support!

@ctrlnull5308 4 года назад

that is going to get very dirty with that tj engine fan. but super cool setup. i ended up just mounting an old pump from a used camaro to the back. fills up my 33's just fine

@cademidgett6947 4 года назад

Why don't you buy one of the really small little K&N air filters to replace the plastic air filter? Would probably work rather well in my opinion and maybe fit below the little black hose touching the plastic filter.

@gacastillo21 4 года назад

Thanks for sharing! Great job!

@hawenas 4 года назад

Is there a fuse in the wiring of the compressor? Better have one

@gabealves 4 года назад

what size tires are you running and what diffs do you have front/rear? Awesome jeep and great channel!

@ArkansasOffroad 4 года назад

35's. Stock axles. Thanks!

@Andrew-dg7qm 4 года назад

Just an update on my installation. A few screws rattled loose on the road and I had to tie it up temporarily on the trail. Keep an eye on your fasteners and carry wrenches. They’re metric 0.8. I replaced with hex heads because the square head bits are hard to find and are harder to get to in the engine bay. Also was a pain to tighten because, the way they’re fitted, I had to take everything apart to replace a couple screws and reassemble the whole mount. And I would use a thicker gauge plate for the AC compressor mount location if I did it again. Thx!

@thomasscott0101 4 года назад

What muffler/exhaust do you have? I have a flow master super 44 on my TJ, but I like how deep yours sounds.

@mtbpirates 4 года назад

Love your vids

@jeremyhollamon1343 3 года назад

Great idea. Love your creativity. But question the reliability and longevity of that compressor now being under your hood getting all the elements all of them your engine heat Steam water freezing temperatures so on. I see this video is a year old. Would very much like your input on how it has held up for you in your state.

@ArkansasOffroad 3 года назад

Jeep has been sold but as far as I know, it's holding up well. You have to think too that the compressor itself gets super hot just in normal use anyway, so I wouldn't say that heat would be an issue. I have a couple local buddies who did this exact same thing in their rig and it's been working great still. It is near the fan, so at least it gets some air. Plus I had the hood louvers on my hood to let heat escape.

@caidhg 4 года назад

If that pump's not fused you should add an in-line to it and you could put the hose around the pump

@ArkansasOffroad 4 года назад

I have an inline fuse hooked up. Thanks!

@ronaldisom2190 4 года назад

Great video and ideas but, that is where my windshield washer container and pumps are. Where are yours or did you just trash them?

@Jostem1842 4 года назад

Hey I know you changed your bumper into a stinger style bumper . Is there anyway you can show or tell us how you did it , I’m trying to do the same with my Jeep. Great vids keep it up dude !

@ArkansasOffroad 4 года назад

Thanks! I don't really have much more to explain really. In one of my videos I have a few pictures of the process when I cut it. Luckily, the end pieces I cut off weren't a part of the middle section. They were just welded on the outside, so there was no hole left over. The only holes that were left when I cut the end tubes off was the bottom sides, where I added a metal circle as a cap. Got those pieces welded into the hole and grinded it all smooth and painted.

@allanwagner4570 4 года назад

Well I gotta admit it The same day I saw this video I got off my butt and mounted my Compressor under my hood for the same reasons 😂🤣 However mine fit perfectly on top of the driver side wheel well with just a few holes to drill man what a difference it makes 👍

@ArkansasOffroad 4 года назад

That's awesome! Glad the video helped. Thanks for sharing!

@OverlandTrax 4 года назад

Nice video, thanks for sharing ✌

@jaimegonzalez1266 4 года назад

Just subscribed to your channel, what setup do you have on your Jeep. Lift and tire size?

@michelleparrott2163 4 года назад

As always nice diy and video! 🙂

@rosasdiego5823 3 года назад

Hey man! I love your videos, question, what size your tires are? Thanks!!

@ArkansasOffroad 3 года назад

THanks! 35x12.5x15

@lefty5631 3 года назад

I have the same exact compressor,that thing gets hot just put rag and water down when your running it

@garygomer7940 4 года назад

Oh boy ... I don’t want to sound critical, but, you should always disconnect, and leave disconnected, the negative battery cable while you are attaching anything to the positive terminal of your battery to prevent “welding your wrench” to the metal of your vehicle. Great project man, I just might do the same with my rig. Thanks for sharing.

@ArkansasOffroad 4 года назад

Appreciate the feedback, and yes you're totally right. Should have disconnected first. Thanks!

@waynemorrison9673 4 года назад

Also buddy u might throw a fuse in that positive close to the battery

@ArkansasOffroad 4 года назад

@@waynemorrison9673 Yes, thanks for that! I failed to mention that the compressor does have an inline fuse already built in. It's about a foot from where the wire comes out of the compressor. I tucked it behind the lip of the fender and it was out of sight in the video.

@waynemorrison9673 4 года назад

Arkansas Offroad 👍🏻 that’s cool but the power in the wire won’t stop till it hits that pointwhere the fuse is at An if u rub a bare spot anywhere before the fuse then fire happens lol

@ArkansasOffroad 4 года назад

@@waynemorrison9673 Good looking out! Thanks.

@JustinHoMi 4 года назад

How’s that air compressor holding up? Most don’t like heat, and I imagine putting it under the hood is going to shorten it’s life by quite a bit.

@tannema 4 года назад

Sorry if I missed it, but did you get rid of your washer fluid reservoir, or did you relocate it? Thanks!

@trentclark508 4 года назад

I really enjoy your videos. What did you have to remove or move in order to make you air compressor to fit. I have a TJ and I have my coolant reservoir in the way?

@ArkansasOffroad 4 года назад

Thank you! My wiper fluid reservoir used to be there.

@steventure85 4 года назад

Nice. This is definitely on my to do list 👍🏻

@duuurs 4 года назад

How has your setup been holding up? Wondering if the heat in the engine compartment takes its toll on the compressor?

@mikehoffman3690 4 года назад

VERY nice mod.

@NCTORO 4 года назад

What type a camera you using thanks. Good video

@ArkansasOffroad 4 года назад

Just an iPhone X

@NCTORO 4 года назад

Arkansas Offroad thanks I’m building a 74 blazer full convertible for some over landing

@noahnakielski58 4 года назад

Do you have any issues with this draining your battery? And also could you hook up an air gun to this, I use one every once in a while to get dirt or water out of places.

@michaeljonessr 4 года назад

You really should fuse the positive leads to your accessories as close as possible to the battery. Bad things can happen in the event of a short and no fuse.

@KyleEven 4 года назад

Great video. What are your thoughts on installing an inline fuse on the positive side of the wiring in case of an accident etc?

@ArkansasOffroad 4 года назад

Thanks. So I failed to mention that the compressor does have an inline fuse already built in. It's about a foot from where the wire comes out of the compressor.

@KyleEven 4 года назад

@@ArkansasOffroad Oh good! Nice work!

@nicofp16 4 года назад

Great video!!!

@cefas6877 4 года назад

Guess I have to go to harbor freight tomorrow 😭

@LuisRamirez-ts1gu 4 года назад

Hell yeah new intro ✌👍✌

@iamthebeav 4 года назад

You need a fuse! All electrical circuits need a fuse or breaker for safety

@ArkansasOffroad 4 года назад

I have an inline fuse.

@kristiancastillothegreenje1395 3 года назад

How do you keep your jeep so clean?

@najeewarden9645 4 года назад

so do you not run washer fluid in your rig ?

@cefas6877 4 года назад

How has the compressor held up?

@julianhaylock9843 4 года назад

Follow up? How does the compressor do in the engine bay like that? Been wanting to do that with my compressor but worried it wont like all the mudd and water

@ArkansasOffroad 4 года назад

I've had no issues so far.

@blueweb00 4 года назад

How do you like a manual when off-roading? I can't decided if I should get an auto or manual for my future TJ.

@ArkansasOffroad 4 года назад

It definitely has pros and cons. I hate my manual when ascending, especially if I spin out or stop on a big incline. But I love it when descending. You get much better control with engine braking.

@slowride453 4 года назад

The heat from the engine drys out the bearing in the conpresser

@ChrisThompson6 4 года назад

What size flares are those on the metalcloak tube fenders? I’m about to order mine and I can’t decided between the 1.5 and 4 inch. These look to be the 6 inch?

@ArkansasOffroad 4 года назад

These are just factory flares. I've never changed them.

@triplethreatoutdoors6523 2 года назад

How has the compressor lasted, anything else different you would do now.

@ArkansasOffroad 2 года назад

It's done great, no complaints

@teamwoodruffgoes7076 4 года назад

Ok, so I realise where this is mounted is pretty high up, however, is there any concern of it getting wet in some deep water crossings? I did a ride that had water up to the top of my headlights....not an every day situation but want to see if there are any safe guards to keep it dry or if it should be ok.

@ArkansasOffroad 4 года назад

Nah, I'm not concerned. If the water is truly that high, I'll have several bigger problems lol.