Nice work! I have 3 of those and just need to replace an outboard bearing in one of them. *Be sure to stop engine when shifting into reverse/forward. Have fun! Oh, sit and lean forward and make a sharp turn at med speed to do a donut!!!! (hold on tight) Whoo Who!! 😆
I have a 93 and 94 exactly like tge other one you have. Mine is not pumping out water. I did replace the jet pump when i first bought it 8 years ago. It set for that long and this year o finally drained tge gas and installed a new battery. Thing started up like a beauty. But again im taking in a lot of water and it dosent look like it's pumping it out. I believe these pump out the rear. But i dont see a line hooked up.
It runs fantastic for the first 20 minutes and then it begins to bog down every time. But it'll immediately start right back up and idle perfect. I feel like it's either not pumping out the water could be the issue or something with that temp sensor.
@@RuralPlayground Okay I definitely will! Subscribed and liked!! 🤙. Just changed the fuel filter and air filter. I'll check your video out prior to replacing the gas and plugs. I shouldn't have been such a cheap ass and siphon gas from my boat. It probably had some water in it.
He really goobered not leaving the shims in place. Unlike zip tieing your rings instead of just holding them in place with your fingertips, then he doesn't look and see the shims under the motor to shoot straight down the crankshaft. Ugga dugguah
Proper maintenance makes a difference between 300 hours being a death sentence and being brand new. No ethanol never. And apparently it is better to leave fuel in these with stabilizer that is to let them sit dry like other small engines.
Hey man great work on that thing! I have the exact same jet ski and it flipped in the water a couple years ago and I havent been able to get to run since... It ran absolutely perfect before that moment. You used to be able to click the starter and it would start immediately... I can get it to start up and I can rev it but it shuts off once it comes back down to idle .... Is there anyway you know what I need to do ? Thanks a ton
Is the compression low on the VXR? The difference in performance might be due to the pump size. Some of the Yamahas had 133mm pumps so a rebuild might not make a big difference unless it's low on compression.
Found a 1990 wave runner 3 for 500 bucks with trailer is it worth it the guy says in needs lots of work not sure what that means are these simple never worked on one before I assume it’s like a lawn mower but with a jet and it’s on water
Just curious.... whats the cost on having a machine shop bore them out? I have a simular projet lined up. Also I have to say this.. Your edits are awesome. I like that you showed forgetting the throttle cable. It's not easy..lol