Thanks for watching - Please Like and Subscribe - Product Links: Rain Bird 360* Sprinkler Heads - amzn.to/2wJoftH, PVC Glue and Primer Kit - amzn.to/2WgTYfG, 3/4 PVC Female Adaptor For Hose - amzn.to/394xPsf, 1/2" Male to Male PVC Riser - amzn.to/398uOH6, 3/4 Tee with 1/2 NPT Threads - thd.co/2wcxTUA, 3/4 Tee - amzn.to/2I12GtS, 3/4 Caps - thd.co/2La9Mv4, and 10' 3/4 PVC - thd.co/2nN87Cm
I made a similar gadget back in the 80's and is 2019 September first to be exact ,and I'm still using it, there were no computers then like now , so I couldn't tell the world , now a days you built something 2 minutes later a person in Argentina can see it ! thank you for posting it , it really works , thank you .
I use this great method and modified it to use 2x5' 1/2 pvc and a 3/4 Tee in center connected to 2ft 3/4 pvc with hose connector. The ends of the 1/2 pvc have 45% with correct threading for rainbird valves on both ends. This method made equal pressure to each valve. Needed to purchase 3/4 to 1/2 reducers for Tee. Cost about $15 at Lowes.
Thanks for the video! I have a 75 year old oak tree in my yard that makes burying lines nearly impossible. Really appreciate the informative video and giving the ones who are really looking realistic alternatives. Keep up the good work!
Fantastic idea! I'm getting a headache with defective hoses and having to search for hoses for multiple sprinkler heads. I cannot install sprinkler system under ground. I'm very glad to have found your video. it is very helpful and I will try next season!!!
Thanks for the plans, I made one using the HE VAN nozzles, these give a heavier spray with less misting. I only did 1' per side on the crossbar, which is more than enough for my needs. Thanks again DIY Reid
I followed your project and I have my front yard installed underground. Going to work on my backyard this weekend. I put a timer on my faucet so they can come on automatically
Just like DIY Reid mentioned, just attached it to your outdoor faucet. I used a female to PVC connector to attach from the timer to the PVC pipe. The timer I have works for two zones
Some have commented about moving this or storing it. One idea might be to use pvc “union” connections on the longer pipes. Not that much more and allows option to expand if necessary, or take apart to store easily.
Thanks for posting the details on the connectors and thanks for making this video. Huge thumbs up. You may have saved me from heading in a whole different direction that would have been a failure and cost my big $$$.
You only need to use dyed primer for potable water and sanitary sewer as per local plumbing regulations. Most other applications such as sprinkler systems, pools, and hot tubs do not require dyed primer. With that being said, you can purchase clear primer for a small bit of savings for most DIY projects, and remember, a little primer goes a long way. There is no need to "load" it on. Another bit of advice, instead of using SCH40 PVC for pressurised water try using CPVC, it's pressure rating is much higher, as is the rating for the bonding products.
Just for information, there is now a one step glue for pvc. The primer is added in. I used it for the first time. Getting rid of the blue primer that was so toxic smelling was really a good thing. Plus you don't see the blue all over the pvc, or take the chance on forgetting to put on the second step.
Little Missy but it does not work well under pressure situations and pipes could blow apart. I believe your only sposed to use that on waste lines that are not under any pressure. Building inspectors also look for that blue/purple line to be sure the plumber did use the primer other wise you may have to tear it out and do over if it’s a project that’s getting inspected
@@1982MCI That is only true of pipes that are under constant pressure. Building inspectors aren't going to inspect a diy above ground irrigation system.
Looks great. Now turn off your water meter and dig the PVC on it’s outlet and glue in a T. Then glue in some PVC and a valve. In two hours shit the valve and turn the water back on. Flush at hose bib for a few minutes. Now add a sprinkler box and a backflow assembly. At some point reduce to 3/4 and run to another sprinkler box. Use the RainBird DV100 valves because they are cheap and very reliable. From there burry some 3/4” PVC from each DV100 to the start of each zone. Glue on 3/4” to 1/2” threaded caps. Then screw in funny pipe and run it full length putting a sprinkler at the end with an L. Next cut and add Funny pipe T connectors and a laborer piece of funny pipe... more L’s and heads. If you can run only three heads, just make a lot of small zones. Install and program your timer. Burry everything.
I followed your instructions but then I said, hell might as well put them in ground. Then I said hell, I should add an automatic sprinkler valve. Which I did, then I said hell I should by a sprinkler timer, which I did. So I installed sprinklers thanks to you sir.
Use sch 80 pvc (the gray one) it is rated for UV it will last longer than the white pvc degrades in sunlight also, the H shape is the most efficient shape hydraulically so nextime use 3/4" the fittings cost the same and the cost difference for the pipe is nominal
What I do is buy 2 cheap whirlybird type sprinklers for their BASES...I take off the spinning thing and thread the irrigation head on this base then I just use hose with quick connectors (I get the irrigation head that sprays a rectangle spray for long strips of boulavard) Same idea though..the irrigation heads are the best to get good volume down quickly!
Different prices in 2022 lol I just bought a house and needed an easy sprinkler fix and this did the trick. I wish it only cost $25 lol Now total I spent about $70 on the sled.
Now just slap an inline water wheel, with a gear-down ratio into small spiked wheels and let the sled "walk" itself across the length of that patch.....then you don't have to pull on it every few minutes.
@@Lawless187indika Yeah, sure, google "moving water sprinkler"...that's the concept. The water flows over a waterwheel to turn pressure into mechanical energy, you then gear that down so that you "walk" the sled slowly. Or you can just buy one, they look like a JD tractor, they are pretty cool.
DIY Reid Yes. you rotate the arms which change the angle of throw. I can get mine down to about 8.5’ ft diameter. I think I can get it down tighter than that if I made my own arms.
DIY Reid It’s cool. It’s still a great idea. I think with the right sprinkler head selection, this concept can be used in the parkways for some people that have the 3-6’ section of easement between the sidewalk and road.
They are very good because there are pop up and and the water get up and very strong I like it I love watching your videos and I like your Rain Bird impact
I just use a 50ft sprinkler/soaker hose on that piece of side yard. It runs the entire length of the house and out to the patch between sidewalk and street. Get the entire side yard covered in 20 mins with no moving other than to set it and then remove.
DIY Reid oh I get it. I’m not a fan of setting up any of these sprinklers but it’s a must in the lawn game and I don’t want to spend the cheddar on an irrigation system.
It doesn't matter that much but you used cpvc glue (orange glue) you should have used PVC glue (clear or blue glue) the blue is preferable to the clear.
I just made this can I send you a video? I’m very proud of myself. And thank you so much for showing everyone how to do this! I’m a first time homeowner I live alone I have to figure things out myself via trial and error but this video saved me from having to just “figure it out” thank you friend
I have done a lot of work with PVC. It’s easier to cut pipe with a PVC cutter and you could probably get away with not using any glue. Instead of using glue and primer there is a product called Red Devil that is a glue and primer
BTW ive done this 10 yrs now. You dont need to waste 4 ft pipe for crossbar. Harder to store and harder to bot get broken. My cross bars are 12 in each side and my pipe is 60 ft long.
@@DIYReid yeah 2 ft is plenty. Im also driving gear driven rotation heads which puts even more side force than your straight up heads. Still dont turn over
@@DIYReid No just the concept in general of people having big lawns and the fact that they must be heavily watered to keep looking green. Especially such a waste of water here in the southwest. Your sled you built was nice. Good job.
Did you make the hose extension yourself or did you buy the hose like that? I’m trying to figure out which way to go. I purchased a kink free hose adapter but metal won’t go into the plastic thread. Forgive me of my lack of knowledge on this, but I’m not a pro. Lol
You could probably do it with a timer that has several outlets if you don’t want to keep moving that one and just make different ones that come on for 20 minutes per zone at a time. I know this video is 2 years old lol
Is a back flow preventer required or recommend for a set up like this ? I only ask because I’ve watched several RU-vid videos on homemade sprinkler systems and when you go to the comment’s everyone bashes most videos because most don’t add one in.
Cool video...thread tape is like lube for when you take it off nothing more..I like this thought I might just try it out and give it to my mom for her yard good video 👍