$5,000 Black Walnut Table For A Famous YouTuber

Подписаться 470 тыс.

Просмотров 3,6 млн

50% 1

In this video, the Triple L Rustic Designs team is building a beautiful 8ft Black Walnut dining room table for a very unsuspecting customer. Stick around to to see how it goes!
Black Walnut Slab from:
www.thirdcoasthardwoods.com/#/
THIRDCOASTHARDWOODS@GMAIL.COM
708-651-9279
SuperClear Liquid Glass Epoxy:
www.superepoxysystems.com/ref...
www.amazon.com/shop/triplelru...
We're an affiliate!
We hope you love the products we recommend! Just so you know, we may collect a share of sales or other compensation from the links on this page. Thank you if you use our links, we really appreciate it!
Wagner Orion 950 Moisture Meter:
www.wagnermeters.com/wood-moi...
SurfPrep Sanding Systems:
surfprepsanding.com/?aff=88
Bidwell Wood & Iron C-Channel:
USE Code: TLRD
www.bidwellwoodandiron.com/TLRD
Starbond CA Glue:
Score a steal of a deal on any Starbond CA glue and get 10% off any and all Starbond products by using exclusive offer code “TRIPLEL10” during checkout at the Starbond store here:
www.starbond.com/?rfsn=649792...
Bits Bits Router Bits:
bitsbits.com
bitsbits.com/product/425-cm250/
bitsbits.com/product/6220-sur...
TNT Industries:
/ tntindustriesllc
Epoxy Scraper:
amzn.to/3pqaKKc
Drill Block:
amzn.to/3A5gv55
LaserPecker 2 Pro:
USE Code: LaserPecker456
uio.cc/s8T7N
Rubio Monocoat:
amzn.to/3A4Bk0u
*********************************************************
Be sure to follow our Instagram accounts!
zoe_anne_?...
/ triplelrusticdesigns
/ homebetweentheoaks
Triple L Rustic Designs Etsy
www.etsy.com/shop/TripleLRust...
Our other RU-vid Channels
Home Between The Oaks
• Why We Planted 2,120 T...
Kristy Larson
• Triple L Rustic Design...
Have a question or want to reach us? Shoot us an email!
Trey@TLRDS.com
Zoe@TLRDS.com
Larry@TLRDS.com
TripleLRusticDesigns@hotmail.com
www.triplelrusticdesigns.com
Camera Gear Used
Sony A7Siii - amzn.to/3tppCsE
Sigma 24-70mm F/2.8 DG DN Art - amzn.to/2Q3Lqf0
Vortex Summit Carbon II Tripod - amzn.to/3a8rbUc
Rode Wireless Go II Microphones - amzn.to/3sdRej6
ProGrade 256GB SD Card - amzn.to/3sm3Btr
DJI Osmo 3 - amzn.to/3mCvZon
Iphone 12 Pro Max - amzn.to/37CeGze
GoPro Hero 8 - amzn.to/34wEsmF
Phone Tripod - amzn.to/2WzzNfv
Epoxy Tools
Epoxy Scraper- amzn.to/3MdSNYu
DeWalt Polisher- amzn.to/3zfYQVJ
Odies Oil - amzn.to/2VMmlrM
Dewalt Sander - amzn.to/3CjrG9x
Polishing Compound - amzn.to/2VNnRKd
3M Pads - amzn.to/2XouaV0
Sawmill Accessories
Wood Mizer Cant Hook - amzn.to/2LOhq49
Wood Mizer Double Hard 4 degree blades - amzn.to/3paoWVz
Wood Mizer 10 degree blades - amzn.to/3aqJhlm
Saw Service Of Washington - www.sawserviceofwa.com
Shop Tools
DEWALT Drills - amzn.to/3nGutmo
Festool TS 75 Track Saw - amzn.to/2KFjIlG
Festool Track - amzn.to/37Fw9XX
Kreg Jig - amzn.to/37B3Dqo
Base Camp dust mask - amzn.to/3q5T7xN
Mesh Sachet Bags- amzn.to/2PbFu2K
Cotton Sachet Bags- amzn.to/3se8yoM
Laguna Supermax Drum Sander - amzn.to/2XvSK6R

Развлечения

Опубликовано:

17 авг 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,3 тыс.

@mihaelachiscovici 9 месяцев назад

We kept finding we needed a folding table. This is so easy to store. ru-vid.comUgkxStL0QRChBju4aQlnTrRgBZvafFog0KU3 Opening and closing is easy as well. It has a great handle for carrying around the house. Its pretty lightweight and slides around easy. We bought it for our daughter’s first sleepover. Breakfast was a blur - but 12 7-8 year olds fit at the table with room to spare. We used it at thanksgiving and 6 adults fit comfortably on each side plus 2 on either end for a total of 8. Super easy to clean up afterwards as well.

@jamesbrummett6030 Год назад

This was a Dollar Store version of Blacktail Studios.

@raysoucie489 5 месяцев назад

Dating back on one of Zoe's other videos,she DID say that she wished that she could afford to have a piece like this-- You did GOOD!!!

@davidmuise388 12 дней назад

Wow that is absolutely amazing such a beautiful wonderful gift to a beautiful lovely lady absolutely perfect god bless you both ❤❤❤❤❤ thank you for sharing my friends enjoy

@johnlord8337 Год назад

Yes Dremel !!! Glad at least 1 person has the IQ to use a quality reaming item for debarking pits and cavities ! There are many Dremel items or Dremel/Dremel-like bits that can be googled. Have said this to many woodworkers - even the woodturning/carving vid peeps. If need be, then get a local welder to weld on a longer shaft, and then abraid down the shaft to smooth surface - so no wobbling.

@johnlord8337 Год назад

Just my peeve - is filling voids with black epoxy when the cavity is big enough to pour clear and be able to see the burly wood surface and texture, while cracks and splits would be blacked.

@laceyknoll5045 Год назад

It turned out great and love that you made it for your wife! Thanks for giving Third Coast Hardwoods a shout out!

@TripleLRusticDesigns Год назад

Thank you so much!

@MrReza656s Год назад

Nice Job. The Baby is a Boy. Im the first one telling you. Congrats. 😄

@billparadiso721 Год назад

Somebody cutting onions? Sure made me tear up watching you surprise your wife with this beautiful table.......well done!!!

@godisgoodwoodworks4801 Год назад

It's a blessing to have a wife who isn't afraid to get out there and work. How cool it is to see Zoey kicking tail right alongside you. My wife is a go getter too. I'm so thankful for her.

@versatileduplicity9313 Год назад

It takes two to tangle

@tima.478 Год назад

My GF is the same...she will dismantle an entire house just to paint 1 room and it will be to perfection. I often assist but honestly, she needs zero help from start to finish! 😉

@LF12468 Год назад

God created woman to be a helper to us men. They are supposed to assist and help us. What good is a woman outside of her natural place?

@versatileduplicity9313 Год назад

@@LF12468 word 🤣

@jessicav165 Год назад

@@LF12468 God doesn't exist

@antoniojauregui1942 Год назад

You guys rock. And you’re awesome dude for making it for your wife. You’re a great man ma man. 💪🏻😃👍

@naturalmystics-kd9vt Год назад

This man is such a nice person he doesn't keep secrets he explains everything and his is a great help

@MrMuncieman Год назад

Makita makes a nice dremel type tool, as I just bought one on sale for about 100 bucks. It has a 1/4 inch chuck! Good luck Find it on the web!

@-RONNIE Год назад

I have to say that turned out really good & a very nice present for your family. I know you all will make a lot of memories around the table 👍🏻

@randytrewhella3635 Год назад

That’s an awesome gift. I was telling myself the whole time I was watching the video how hard it would be to sell something as great as that! Nice job. Love your guys’ content.

@dewster1966 Год назад

My father use to do a lot of Epoxy back in the 80s. I'd say that really good ventilation is a must. Especially during the heating. A few years after working with the Epoxy he contacted Lung Cancer. We thought nothing of it, but several of the people that were also making clocks and signs also contacted Lung Cancer.

@skitzochik Год назад

wow that was really unexpected & i teared up...that is such a sweet gesture from hubby to his wife.

@brucebondy3416 Год назад

Nicely done sir. You might try using a flex shaft Dremel tool with a Kutzall burr to remove the punk wood. Also, if that doesn't go deep enough for you you can get a piece of same size steel rod and weld it to the burr shaft. You can extend the burr that way to any practical length you might want.

@robertcoates5045 Год назад

Sweet build. You are a rockstar for making this for your wife and and your home, I love the thought you put into the the process and the tips you provide to the rest of us. Thank you for sharing this build!

@TripleLRusticDesigns Год назад

Thank you. Do not reply to the scammers saying to text them.

@holgermendoza7570 Год назад

@Justin-bz1dp 10 месяцев назад

@@TripleLRusticDesigns he

@TTSetters Год назад

This and black tail studio. 2 different approaches, but very similar style. Also, same sponsor Liquid Glass. Pretty cool.

@user-ti5df1jg7t Год назад

Отличная работа,молодцы!👍 А главное-Вы,отличная пара.☝️🤲 Привет из далекой России.🇷🇺

@zeptocasting5351 Год назад

I love how concentrated she is while you are doing the tape😂 never leave that woman, cause she really loves you 🙂 marry Christmas to you from Norway 🇳🇴

@albertawheat6832 2 месяца назад

She doesn't mind sexualizing herself for the video's either...He must be so proud.

@michaelmaimone13 Год назад

He’ll yeah I been waiting for a black walnut video

@TripleLRusticDesigns Год назад

Awesome thanks!

@gregbarnes578 Год назад

I did finish work for a chainsaw carver a few years ago, and we used a die grinder with an assortment of bits for cleaning out bark seams

@brandonwoodworkersclub4097 Год назад

It turn out beautiful ! Love how you showed the whole process including the surprise ending. Wow !! Fantastic work for sure

@TripleLRusticDesigns Год назад

Thank you so much!

@butchfoster5256 Год назад

Saw that coming.

@JustinArrington Год назад

Quick tip, when using that router with the square/round base, use the round side along a straight edge fence. The reason is when using the flat side, you can have it lift away from the straight edge ever so slightly and it can ruin a straight line. If you keep the round side against the straight edge, you can rotate the router without losing contact with the straight edge and your line will stay true. Lovely table you have there. Good luck to you and your family.

@funtyes1970 Год назад

so pretty much you going to tell this guy how to use a router lol 😂

@catchingwildmeats Год назад

Exactly

@AntonioClaudioMichael Год назад

Amazing suprise on this table being For the Wife Great work All she had no idea she was working on her Own Table that was smooth bro

@djcsound Год назад

That was a real nice thing to do for your wife, Kudos to to you my good man.

@garykintzler4273 Год назад

Thank you for all of the information and taking us along for the build

@TripleLRusticDesigns Год назад

You bet

@cameronutube Год назад

I see the C channels have elongated holes to allow for shrinking and expansion, but the crossed table legs don't, this will cause the table top to crack over time as the legs screwed to the bottom of the bottom of the table in that way will restrict expansion and shrinkage. In short for longevity of original form, the table legs also need elongated holes too

@fredboucher8689 Год назад

I do not know about you guys but that looks like a pretty expensive table and I am going to assume you will keep it inside your climate controlled home. If it was properly sealed and finished there should be minimal expansion or contraction.

@analytics8055 7 месяцев назад

Amazing project. As a youth in the 70's worked twin 90 cc 96" Alaska mill making 4" redwood stump tables in Fortuna CA... Good times.

@stevepoore2322 Год назад

Awesome! Nice gift for your home and wife!

@Dale.Nienow Год назад

It turned out awesome, love the voice over with the steps and how you did it, very helpful for people that are following along! Keep up the great work!!

@TripleLRusticDesigns Год назад

Thank you so much Dale

@j340_official Год назад

You made a grown man tear up watching you surprise your wife with this very well done table. It’s such a good feeling to build something and have your wife not only help you, but also benefit from the fruits of your labor. Excellent job. She’s gonna decorate it real well too.

@paulraymondallred5988 10 месяцев назад

I love you Zoe

@laruegeigerjr1368 Год назад

That is a very beautiful table. And Congratulations on your Son to be.

@richardsmith5738 Год назад

Beautiful table. Beautiful family. Reminds me of my wife. She would always insist on helping in projects too. Great job.

@BigWayne_1973 Год назад

Congrats to you both. The table looks so beautiful and amazing. Looks really good in your house. Great job!!!

@Jinxterman69 Год назад

ABSOLUTELY EXTRAORDINARY!!! You are a true craftsman! Perfect table & execution in every single way! WELL-DONE!!!!!!

@TripleLRusticDesigns Год назад

Thank you so much

@AntonioClaudioMichael Год назад

Oh my goodness after the oil on the bottom them colors and Patterns are gorgeous in this black Walnut slab

@rwright3395 Год назад

Man , that's a beautiful piece of wood . I hope you have a healthy Boy Sir . Please be safe . I have a son . By the Grace of God , he's not a bad boy at all . He will soon be 20 . Time flies, spend at much time as yall can with your children. Bless yall again.

@robintaylor-mockingeemill8223 Год назад

Might be your best video yet , you have come a long way . Good work

@TripleLRusticDesigns Год назад

Thank you Robin! Many more build videos to come

@On_The_Farm Год назад

Great job! That is a lot of work creating a table like that. Looks like Zoe loves it!

@pnarzary 8 месяцев назад

You all did great job. The table is very very good but....... What was even better was the surprise gift to your wife. That really touched me.

@nielperron6966 9 месяцев назад

A smart man who knows how to treat his better half.

@tylerreed8169 Год назад

You could try a flex shaft on the dermal if yours allows it for the void

@TripleLRusticDesigns Год назад

Thank you!

@SoloRider831 Год назад

First off, prayers up for a happy, healthy baby and that momma recovers quickly. Ya'll are an amazing couple! Thanks for sharing your experiences in woodworking, both good and (possibly) bad. Woodworking can be extremely forgiving to a point, but it is good to see a man who can admit he can do something better and continues to learn on this life's journey. Prayers up for you and yours and I look forward to seeing more "adventures" in woodworking from you folks. God bless!!

@user-ww2lc1yo9c Год назад

Just hope the baby won't follow the footsteps of others in the modern western civilization founded upon Judeo Christian values and become a pornstar

@nileswright8915 Год назад

awesome table, family, property, workmanship..... wow! just a perfect world! (compared to the rest of you tube) lol, :)

@moondog4313 8 месяцев назад

You had the best help a man can find . Congratulations on y'all's baby 👶

@superjaymccool7880 Год назад

Idk if anyone said it but I use the Dremel flex shaft and it helps with the bit depth bc it can get into tighter places than the actual Dremel. Good luck🤞

@SoloRider831 Год назад

True that... sometimes you can find a little longer bit as well, but always good to check it first. The right tool for the job is so important.

@jameslynch2185 Год назад

CONGRATULATIONS on the baby 👍🏻👍🏻👍🏻🇺🇸🇺🇸🇺🇸🇺🇸

@TMoney1341 Год назад

2 tips for you, 1 set your distances off the rounded part of yout router so if the router turns slightly your cut won't wander. 2 for router depth put the cutter down onto the surcace and put yout c channel inbetween the depth slider and one of the posts and it'll be perfectly flush.

@Paco-hh4jd Год назад

Congratulations on the baby!!!

@westcoastkruzerezwestcoast1426 4 месяца назад

And congratulations for you and your wife. You guys about to become new parents. Godbless

@rogerbamatutz1927 Год назад

Great job! That will be a table that'll live on long after we're all gone. Zoey looks great. Hope she does well over the next 90 days.

@TripleLRusticDesigns Год назад

Thank you!!

@howardbarta1726 Год назад

What would really look good to go with the table is some chairs to match it

@billm4560 Год назад

I was thinking the same thing! 😊

@TripleLRusticDesigns Год назад

I don't have enough skills to make some black walnut chairs. Would look great though

@casanova7706 Год назад

the best part is when you revealed who it is for. her smiles are priceless. congratulations on William's arrival.

@davidhead5943 Год назад

Congratulations on y'all's baby !

@AndrewPayne Год назад

Fantastic table! Superb video and the voice over commentary was really clear and easy to listen to. Well done!! 😎👍

@TripleLRusticDesigns Год назад

Thank you Andrew! We really appreciate that

@seanbrotherton542 Год назад

I'll be honest. I was expecting to skim through the video of another table build. You explain things very well and included your mistakes. I watched all of it and even hit "rewind" to make sure I got all the skill building details. Well done. Liked and subscribed. Don't change your style! And nice table!

@franciscop.4099 Год назад

WELL DONE , LOT OF WORK AND EXELENT CRAFTSMANSHIP ,

@67bronconut Год назад

for cleaning out the voids, look at tooling and attachments for doing automotive head work / porting, you can find Tungsten Carbide Rotary cutting bits in 150-160mm lengths among other

@Chuffy1976 Год назад

Dremell have a flexi line extender it might help you get a little bit deeper

@TripleLRusticDesigns Год назад

Thank you!

@arthurtmorgan4211 Год назад

I’m thinking a carving bit that fits into a flexible arm from a drill press. We use them for duck decoys. They are longer and easy to control.

@TripleLRusticDesigns Год назад

That may work! I'll look into that

@arthurtmorgan4211 Год назад

@@TripleLRusticDesigns it does great detail work, it’s speed is easily controlled. Let me see if I can get a link for you

@jefftabor595 Год назад

Great job. For a minute there I though I was watching Blacktail’s channel. Good to see Zoe happy with the table

@TripleLRusticDesigns Год назад

Thanks Jeff! I tried my best to edit this one like him.

@mlsf4400 Год назад

You are an awesome husband! What a wonderful gift to your own family. That video was amazing.

@mattd8222 Год назад

Good work. Instead of grinding the table legs around the bolt holes you could use your step drill bit and drill from the other side slightly creating a small chamfer. I love to mix metal and wood in my projects.

@TripleLRusticDesigns Год назад

Dang! Great tip thank you!

@MHMHM7654 Год назад

Awesome table. It just took so long that I had a feeling your wife would deliver before it's done :) congratulations on your growing family. And thanks for sharing all those tips!

@tittyskillet3413 Год назад

This is the best comment ever.

@slove120031 Год назад

Try a Die grinder and take a look at all the bits available. There are air powered and now battery powered die grinders that would seem to be perfect for your task.

@DoctorHayduke Год назад

I haven't caught one of your videos in a bit...glad to see you threw down for some Festool gear. Great system.

@jefferywilson7841 Год назад

BEAUTIFUL WORK

@TripleLRusticDesigns Год назад

Thanks Jeff

@t.jeffveal-goattownfirewood Год назад

That is a beautiful table. Great job. I've built furniture before, so I know the work and skills that took.

@TripleLRusticDesigns Год назад

Thank you Jeff

@t.jeffveal-goattownfirewood Год назад

@@TripleLRusticDesigns wish I could send you the pics of the queen size cherry bed I made for my wife. 14th anniversary gift, 20 yrs ago.

@tybell8899 Год назад

Congratulations Zoe! Great craftsmanship on table.

@alexward4569 Год назад

Thanks so much for this video. I have a 7x3ft. slab of maple that's been drying for 2 years. It's going to be our kitchen table and this video is a massive help. Thanks again and beautiful work.

@thewiremanbig Год назад

Amazing content. Congratulations to your growing family.

@TripleLRusticDesigns Год назад

Thank you very much

@mikeclark7332 Год назад

Great job guys... Love the table! Trey you are a pro

@TripleLRusticDesigns Год назад

Thanks Mike!

@Richard-pb9zu Год назад

Very handsome table. Congratulations on the upcoming baby.

@patbumgardner4512 Год назад

My name is Pat I live in Luray , Virginia , That is a beautiful table you made for your wife what a guy.. Where I live at now was my grandfather's Homestead, I'm from Maryland originally been here since 77 win the navy for 10 years, Used to come down to my grandfather's in the summer when I lived in Maryland and he had a black walnut tree that was probably 5560" around and one afternoon there was a bad lightning storm and they're known for attracting lightning from what I understand And we watched the lightning bolt hit that tree and split it right down the middle broke my heart. But once again that's a very beautiful table you have a nice business and I'll be keeping up with your channel enjoyed watching you make it

@MeekoSan Год назад

Great video, keep ‘em coming.

@TripleLRusticDesigns Год назад

Thanks, will do!

@LF12468 Год назад

I've been a tradesman for over 20 years and I'd say you still have room for improvement on your excepting of mistakes you've made on this job. It's called having integrity. It does not matter if it's under the table out of sight. You saw it! Do better!

@TripleLRusticDesigns Год назад

You’re right. I’m burning the table as we speak and will start over.

@johnmulrenan Год назад

Funny criticizing someone else when you say excepting when you mean accepting.

@ruskell100 Год назад

Do you honestly think that the table is worth $5000.00 dollars? I don't think so.. I mean it's a nice table and all but there's nothing fancy about it. Fancy joinery or ornateness or something...not trying to sound like a hater or nothing 🤔

@steppoffaith8426 Год назад

@@ruskell100 how often do you cross walnut slabs this size!?

@MrJoehayter Год назад

Absolutely Beautiful!

@gr8dvd Год назад

Re: clearing voids to prep for epoxy pour, guessing they still make flexible drill attachments, about the diameter of carpenter’s pencil, which can be held like one and accept’s standard bits (1/4" max.). Have 2 old ones each 18" long… both bought used, 1 part of a now discontinued Canadian MasterCraft multi-tool. Nice work including ‘squaring’ ends… depending on slab & objective, squaring (literally) off centerline based on midpoint of each end works too.

@talegunner4414 Год назад

I love black walnut. Whats not to love about this table. Great job. God bless you and your new family

@Recovering_Californian Год назад

Good looking table. Been wanting to do something similar for myself.

@TripleLRusticDesigns Год назад

Heck yeah! If you have any questions just shoot me an email!

@jameshodgins1937 Год назад

Table looks great. How about an update on all the trees you planted at your house?

@TripleLRusticDesigns Год назад

Yeah we need to do an update. We have some trees that are 6ft tall now and some are still 10-12" tall. Crazy differences in them

@jameshodgins1937 Год назад

@@TripleLRusticDesigns Sounds good.

@billhamilton5498 Год назад

I have watched a few of your videos and you 2 look like a nice couple. Hope the baby and mom are doing well. One word of advise for you is just use a larger drill ( 1/2 Bigger) and drill the wholes just a touch and the bures are gone. It won't make a mess of the powder coat if the Dremel slips. Keep up the good work. Cheers Bill

@j.garyguay9186 Год назад

im a residential repair plumber and i use a Dremel and its big brother the roto zip (*roto zip is a Dremel on steroids) anyway they have the flex connector that spins in the extension so you are holding a long thin #2 standard school pencil/pen, that would be perfecto for bark cleaning pre-epoxy fill!! i would keep checking they are getting new tips attatchments daily now it seems! hope it helps you!!

@mauroscarinci3851 Год назад

Great job !!

@TripleLRusticDesigns Год назад

Glad you liked it!

@donreid7191 Год назад

You might try a whip extension for the Dremel. It will let you be holding a roughly pencil sized end to fit better in tight places.

@barking.dog.productions1777 Год назад

What I was going to say - hang the motor over the work, and get a foot switch as well.

@user-fr5hs8bo8x 4 месяца назад

The Fordham with the flexible shaft and a 1/4” collet. You can then use larger burrs with longer shafts! I hope this was helpful

@KingKahunaGames Год назад

Looks great! Good job!

@TripleLRusticDesigns Год назад

Thank you! Cheers!

@paulmay5279 Год назад

The table looks great! I just wonder if a couple Bow-Ties across the splits would be a good precaution.

@TripleLRusticDesigns Год назад

Good question! The epoxy down in the crack will keep everything bonded together. Also the C-Channel underneath the slab will also ensure the slab can't crack apart.

@MrChuckiebklyn 6 месяцев назад

Congratulations!!! I hope you have a beautiful, healthy baby.

@floydjackson298 5 месяцев назад

Outstanding, Happy customer 👏.

@marlinmr7 Год назад

This was a great learning video and that table is totally awesome! Bonus was seeing Zoey's reaction to finding out it was for your own house plus appears Zoey is doing great! Only a few more months a little munchikin will be keeping Dad & Mom quite busy I am sure.... Thank You! For Zoey and the little one in particular - Take Care & Stay Well! 😊

@TripleLRusticDesigns Год назад

Thank you for the kind comment! We appreciate it!

@user-nw9yk8qy9e Год назад

@@TripleLRusticDesigns ??????????????????

@BrianRust89 Год назад

Awesome job! I like this style video a lot. You guys should do more of it. Also not to sound rude at all but I think you guys need a good woodworking workbench. That would be a great video series to have you guys build a nice bench out of timber you milled. Just a thought. Thanks again

@TripleLRusticDesigns Год назад

Thank you Brian! These are the style videos I’ve always wanted to make. It’s just been a long road to get to having a nice air conditioned shop with good lighting to work in like we have now. Many more videos to come! Thank you for the support

@BrianRust89 Год назад

@@TripleLRusticDesigns of course!! You guys keep up the great work!!

@DubCPicker Год назад

Great video and not click bait move….it was about a man who loves is wife and wants her to enjoy the level in a beautiful table….it surprised her for sure… she and their baby will make memories with this table and this home ❤️❤️❤️

@CV-br1eu Год назад

You two have the coolest job on the planet! Building art derived from nature with your hands and badass machines! Bless your baby and family.

@johnlord8337 Год назад

When you drill out the screw holes of the channel stand - why not use a drill collar (ring with hex nut) so that you never have to worry about depth when you have properly set the depth of the drill.

@TripleLRusticDesigns Год назад

That is a great idea. I will steal the one off my Kreg Jig bit and see if that works. Thank you

@jimmyb1451 Год назад

@@TripleLRusticDesigns Also, for digging out knots and inclusions, a dremel is a toy, not a tool. Get your hands on an electric die grinder. Carbide burrs come in all shapes and sizes.

@grill_in_da_kat Год назад

@@jimmyb1451 That's a game changer. I just looked it up. He could use a cordless drill with those bits as well I think.

@jimmyb1451 Год назад

@@grill_in_da_kat A cordless would sort of work. Not really fast enough for the burrs to cut properly though. Also, generally, putting burrs and mills into a three jaw chuck is a very bad idea. The radial loads rattle them loose and they end up flying across your workshop. That said, I've done it before lol.

@daddygoat Год назад

Is'nt Super Fine smoother than Very Fine?

@TripleLRusticDesigns Год назад

I have no clue. They should have made it less confusing. 1-5 would have been better

@jimspencer1077 Год назад

Wonderful table wonderful job good video

@danielrandolph9170 Год назад

Awesome looking slab of wood with yal good workmanship made it come to life super cool !! Daniel from central Mississippi

@thefakerscritic1397 Год назад

Although your work on this table far exceeds anything I could do, I sincerely advise you to watch "Blacktail Studio" before you start making things like this for your customers. I would personally be very disappointed in the C channel inserts and the fact that the cuts are not perfect. As a customer paying for a slab of wood like that I would expect perfection at every level. Great job though overall and GL in the future.

@TripleLRusticDesigns Год назад

Been subscribed to BlackTail Studio for many years now. Thank you

@Imageloading... Год назад

A proper table this size and black walnut would be double the cost so they maybe got their money's worth...... Do you expect more from people who can hardly handle their big saw, and actually make a video with chain on backwards