For example, it holds fixed with H 7cm V 12 cm, in which case it knows how to make mistakes much more than it shows. It is extremely precise in good working conditions.
The description of the latest firmware for this receiver reads as follows: Optimized the problem with big value of H and V factor while receiver gets fixed solution.
Hi, I have a question about the South device, I have a G7 with a K803 board, I work in a survx application, I noticed that it keeps a fixed solution for me and when the accuracy is over the set limits for fixed
Good afternoon. If we are talking about the G7 (called INNO7 in the West), then there should be a Trimble BD 990 board. If we are talking about the G7 receiver (in Russia it is called S680IMU), then there really is a board for 803. The problem you described may occur on the K 803 board. It's not about the application, but about the data processing algorithms. Perhaps if you update the software of the receiver and the board to 803, the situation will improve. It is also not entirely clear which application you are working on. You can write a letter with maximum information to the post office support@geodetika.ru ?
Do you know anything about this, is it up to the Gnss board or to the application and work on the Android device, and will it be solved with an update?
Sometimes more recent firmware of the receiver or GNSS board can improve performance. Often, the latest software versions on the controller can also improve the situation, but not so much.
