Dear Ruediger, We collected some data and information and I would like to share that with you. We need to have conf call. Unfortunately Tuesday morning 9.00 AM Eastern time is already booked with Jonathan (Sonova). What about 10.30 AM ET Tuesday or is it too late for you? Another option is Wednesday 9.00 AM. What about that ? I will call on Skype. Topics to discuss from my side: 1) Adjustment of formula E-Shell 36 after TB - we got colour and opacity, exposure curve to discuss. 2) QC E-Shell 25 VB - except colour, everything looks good. Possible explications? 3) E-Shell 31 - efficiency of adjustment? Correlation open vents - quality of test builds? E-Shell 39? 4) E-Shell 41.1 testing in progress, ISO, references? Let me know you availability. Thanks Hi Al, I revised Ziyan's report regarding the PC unites performance and different light sources study, which we did some time ago. Based on that and some experiments, which we did last week I have to say that for successful results for MCAD application we have to use combination of slow cure unite and thermocure. With combination of slow cure and thermo for PU 39 formulation we were able to get 84 MPa at strength, 5.8 % elongation and 3000 MPa Modulus. Those numbers will be good for Lockheed. We need 2x 60 min at slow cure box (probably can be reduced, to save total post-treatment time) and 2x20 min at 160 C in oven. According to our experiments even just thermocure gives better results, then slow PC alone (can not overpass 50 MPa). The " success" of Dymax was combination of high power and heat. I hope new procedure will not influence lower shrink that slow unite gave us. PU 39 and E-Model light are based on the similar urethane acrylate chemistry. I am sure this procedure will work for E-Model as well. Sorry for long e-mail. Sincerely Vadim
Валерий Д более ччччссссччсчсчччсчсчссчсчсччсб. Б. ъ юююъъьь ъ бьъб. бььб. Ъьъъъьььъььюююббббюбюбббюбььььбьььььь. Ъ жить. Бюьюббьбб. Бы. ББББЬЬББ Ююба. Б. Б б бы. Б б юбююю. Б. Ллълюьлььюьььжьжьжбжжжжжжж жььодожоодооодтдтьььььжьъддьььъъъььдддюд. Б. Ббьюб юдо
Таки до обрэзаня, многоуважаемый ,замечательный, Зиновий,возможно ваша фамилия была Високовский ,що каже Високий Сокил, чи не та.....? Це не тильки анэкдоти, це образ жизни.....очень таки экономный...:))
Юмор должен быть английский, пословицы русские, а анекдоты еврейские. Не нужно путать еврейский анекдот и анекдоты про евреев. Это как говорили в Одессе две большие разницы. До чего довели Одессу украинские власти! Там всего 1,2 % осталось евреев.
Дядя слушайте здесь шо таки 1,2%???))))))))))Каждый может иметь свое мнение, но им не обязательно смешить окружающих!!!Ви у себя там умница,а в Одессе еле еле идиет!!!!!!
Анегдоты за Одессу-- отлично! Ностальгия по дому! Даже нет, не так: за той Одессой, которая была в моё детство... Так уже не будет... Со своей мовой....с этой своей самостийностью... Одесса-- отдельная история...
Високовский? Ви оччень замечательно умете. Ви очень кграсиво граскали анедоты из Адессы, Но ви нам грасмказали ха ха анекдот, про Галю. Но хочете услишать анегдот об жителях Иордантской долины? И.