Hello everyone! Phone charging does not work. How do I find out what the reason is? In the charger itself or maybe in the USB cord? In this video, I'll show you how to figure it out in just one minute! You can do such a check using a multimeter, but it is much more accurate, faster and more informative to use a USB tester! I will use the FNIRSI FNB58 USB tester. By clicking on the link below, you will be able to purchase this latest generation USB tester with many additional useful features.
FNB58：s.click.aliexp...
I will also assemble one very useful device with which you can fairly accurately assess the condition of the charger and the USB cord. It will work together with a USB tester. I will solder this scheme with the help of volumetric (hinged) mounting. But today I will have a homemade soldering iron - a soldering iron made of a resistor! In one of the previous videos I showed how to make such a soldering iron and what it is capable of. Just below there will be a link to this video and, if desired, you can watch it.
The device that I will solder today is called a resistive load. Just to measure what voltage at the output of the charger is not enough. It is necessary to know what current the charging provides, whether there are any losses in the USB cable, and so on. All these indicators can be found out when using a resistive or test load.
This device will require a minimum of details: 4 LEDs and 8 resistors (4 load and 4 current limiting for the LED), as well as a pair of USB ports. After assembly, the resistive load does not need to be adjusted and it can be used immediately in work. The maximum indicators provided by the resistive load are: current consumption - 1.5 amperes and power - 8 watts. You can see all the details on the assembly and testing of this device in this video.
You can download the schematic diagram, ask a question, suggest an idea for a video or solve other important issues in the Invexlab chat:
t.me/invexlab_...
✅ This is the best homemade soldering iron! An almost perfect soldering iron made of a resistor. ✅ - • ✅ This is the best hom...
Interesting videos:
✅ Cool idea! Work for 5 minutes, and the result will please you! ✅ - • ✅ Cool idea! Work for ...
✅ Homemade IR soldering iron! This is a really cool thing! Soldering like a madman... ✅ - • ✅ Homemade IR solderin...
If you liked this video, then like and subscribe to the Invexlab channel!
Click on the bell icon near the "subscribe" button and then you will immediately know about
Publish new videos on the Invexlab Channel.
Everyone understands that in order for the channel to develop and the new videos to be better,
and experiments are large-scale, material investments and a lot of time are needed. Since the video
I take pictures in my free time from my main job, ANY help will be valuable, so the videos will be
go out more often and better. In order to support the channel in development, you can translate any
the amount you consider necessary for the following wallets:
Payeer - P38377422
PayPal - dmitriy.dudkin.1984@mail.ru
For cooperation, write to the mail - dmitrij.dudkin2014@yandex.ru
#usb_tester #FNIRSI_FNB58 #FNIRSI_tester #how_to_check_the_usb_cord #resistive_load #test_load #charging_does_not_work #why_the_smartphone_does_not_charge #the_phone_stopped_charging #how_to_solder #beautiful_soldering #radio_electronics
1 окт 2024
