yeah he probably didn't do it properly because on my first try I actually put the fork directly in the two holes in the zip😅 but you have to put it on top where you see where the actual pulling thing is. @@smt7649
Thank goodness! and thank you! You just saved me so much work, take my word for it. 😅❤❤❤❤❤ If someone is having problems doing this, there are a few things to check, I’ve been my own designer of my clothes for many years and have worked with plenty of zippers 1.) Make sure that the zipper head/glider/pulley, is not squeezed together too tight. Pry those apart more. 2.) If the zipper is plastic make sure that they aren’t smushed or melted etc. if they are, trim down to a newer spot that will still work for you. 3.) Make sure that you place the glider the correct way on the fork in the first place, in the front where the tab is to pull the zipper. After that it’s mainly just patience, good patience. BTW, I’m NOT a smart as, I have already learned these things the hard way and wanted to save someone the agony of defeat! ❤ LOL 😂
It may take a few times doing this to get the zipper straight. Zippers and zipper sliders come in different sizes, so you may have to remove a tine on the fork by moving it back and forth with a pair of pliers until it breaks off to make the slider fit. You can get a small woodworking clamp to clamp the fork to the table.