I'm glad I was able to help you, brother. If possible, it would be a great help if you could play other videos. I want to buy snacks with the advertising fees.
Уважаемый tono9, отличное видео! Очень понравились статичные кадры, крупным планом - хорошо видно детали!👏👍 Пожалуйста расскажите, какой раствор Вы использовали для промывания кнопки? Что можно использовать как замену этому раствору? Какой клей можно применить для закрепления наружных клавиш? "Ухо" сломалось, залипла клавиша ,,+,, - хочу попробовать починить... ... 😂СПАСИТЕ-ПОМОГИТЕ😂, человеку ничего не понимающему в электронике... 🤔😭
0:57 wow. Undestructive opening wizard! Did you do anything to soften the glue? like heat or ipa or something? Can't read the subtitles unfortunately. But definitely very interesting to watch! I wish to convert a paired to accept a wired connection. Had a chance to figure out which wires are the audio wires? Wanted to use mine while recording. Bluetooth obviously introduces latency so that's a no go. And I hate to wear headphones that cover my ears or sit inside them for too long.
Ok. The rubber sleeve comes off quite easily indeed. The button is a problem, you somehow got the pins out of the rubber, which you didn't show it in the video, and seems impossible... I opted to cut the little middle bit and could slide the rest over the whole thing. I also previously cut the titanium head wire, to shorten it a little and make it fit snug around the head. I can clearly see five twisted wires running along it to the other earpiece and the battery I think. There's blue, purple, green and red. Couldn't see black, but it might run in the middle... would make sense, because in your video you can see there's six. I'll see if I can find out which colors transfer the audio signal. And if I can simply use those to connect a mono socket to. Would think the bone exciter is still wired up much like a regular headphone speaker, but don't know.
Could look at it some more just now. Definitely 6 wires running along the headband to the left earpiece. Now left we've got the battery and a button that handles pause, skip and repeat. So we need 2 wires for power, red and black make sense. Could they be used for charging too? Guess so. Since we also need 2 for the button and then we've got 2 for audio. Or 1 if gnd is shared. From your video you can also see 6 wires going to the the right earpiece. This time purple and regular blue replaced by yellow and light blue it seems. Right we've got some holes which I suspect are the dual microphones. So we need 4 wires for those unless gnd is shared somehow again. I would 've used the new colors for this. And the red and black for power, if that was needed... Brown and green go both sides. Gonna see if those are audio.
Yes!!!! Guess correct. Brown and green is audio. Listening to a 8ohm 2wat speaker now haha. Cool. Thanks to your video I didn't need to open mine further.
