Forks being all the way in doesn't matter if the load is wrong in the first place. The machine he is using has a safe working weight requirement which has been exceeded. This is why you can see when he pumps the hydraulic Jack it won't go up. Even if it managed to go up and he was able to pull out the load would still be unsafe to move as it would be hanging to one side with no counterbalance meaning it could fall easily.
Dude even a motorized full size forklift would have a hard time lifting that. That's at least 3000-4000lbs pallet. These hand forklifts are design for small loads or even domestic use like moving or something.
We tried this, says 2 ton lifting power but cant even lift a ton easily, it tips forward. We got in an accident and thanfully no one was hurt. Avoid this or use for very light loads. Buy a quality used or new forklift instead
Common sense doesn't prevail, load center was off you had to back up around 6 inches once lifted, go down and jack back up and that lifter has exceeded it's capacity for sure thats around a 2ton pallet
Actualy you`ve learn not to use this Stacker model for more than 300 kg.. trust me i was trying the electric one and above the 300 Kg on the pallet you can`t do shit with it.