want to buy a ringer or check us out/support us or just browse our vast free archives of ancient electrical engineering knowledge that's listed for free on our patreon? Any support helps in achieving our goal of becoming a small commercial electrical research company that pushes the bounds of what's possible with efficiency & sells exotic generators as well as providing full schematics & being open source.
www.patreon.com/MTECHINDUSTRI...
Greetings Everybody in this video i give exact disclosure of how to construct my modified super joule ringer 3.0 circuit that's modified for negative resistance.
The circuit is constructed on a 6 inch long type 77 metglas laced ferrite rod & all coils take up 4 inches of space & are centered on the rod. The L1 is 26 awg & is 4 inches long. The L2 is 14 awg & is 4 inches long & wound in the opposite direction to the L1 & is bucking. If not bucking the circuit will blow up. What makes this circuit new & unique is we don't use the high frequency output of the circuit directly but instead we send the power into a Negative resistant RLC network composed of three 30k 5 watt carbon film resistors in parallel along with a 1nF ceramic capacitor in parallel that's earth grounded for non linear effects with a cold cathode neon bulb in series to an earth connection of the hot side of the L1 coil. The theory behind its operation is we then tap into the power of the negative resistance non linear RLC circuit wirelessly & resonantly to avoid detuning the primary oscillating circuit & The L3 Tesla coil runs our loads. The L3 coil is wound per tesla patent 336,961 & has three SR560 Schottky diodes installed on it. The L3 coil (s) must be wound in the same direction as the L2. Our goal & theory of operation is to wirelessly tap into the gain of power the negative resistance RLC circuit experiences from the earth ground & the cold cathode neon bulb & other non linear effects. This system when tuned can also super charge batteries due to its high frequency pulsed dc output from the L3 coil (s)
The value of the high quality ceramic capacitor I used in the video to speed up the motor while improving efficiency is a 0.22uF Depending on the motor run you might need to experiment with different capacitor values ranging from 0.15uF to 0.30uF for utmost efficient operation of the motor & I believe Nikola Tesla was using this method to run a motor generator combo to generate ac power at virtually no input power cost once he earth grounded his negative resistant circuitry.
links to other people doing good work
1. • TESLA PATENT + MY CIRC...
2. • The Ringer in Small St...
3. • INVENTOR3 OPEN-SOURCIN...
4. • it is wake up time
1 июл 2024