No video :(

"🍵Cold Brew" Fuel Strainer for Your Equipment

Подписаться 137 тыс.

Просмотров 30 тыс.

50% 1

Jon Ritter discovered that a cold brew coffee filter fits right inside the fuel tank on many pieces of equipment, so we had to put it to the test. This filter could help prevent large debris from making its way into your fuel tank and alert you to sludge build-up in your fuel container. While this filter can provide a layer of protection, it does not replace your traditional fuel filter.
Fuel Cap That Fits The Filter - www.messicks.c...
Coffee Filter County Line (tapered version) - amzn.to/3vAVVXP
Purchasing from this link supports Jon and his channel at no extra cost to you.
A Ritter Bit Will Do
KUBOTA BX MUST HAVE (Stainless Steel Fuel Filter) - • KUBOTA BX MUST HAVE (S...
PROBLEM SOLVED! (Kubota BX Fuel Coffee Filter) - • PROBLEM SOLVED! (Kubot...
800.222.3373 | www.messicks.com | Parts Hotline - 877.260.3528
Kubota Parts - www.messicks.co...
New Holland Parts - www.messicks.co...
Case IH Parts - www.messicks.co...
Service - www.messicks.co...
Sales - www.messicks.c...
Messick's Merch - www.messicks.c...
Kubota Merch - www.messicks.c...
Toys - www.messicks.c...

Опубликовано:

21 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 114

@aikismith 2 года назад

Does not even come close to fitting in a B2601. But we can make iced tea and coffee, soooo... Will have to sip some tea while thinking up something else. :)

@McScott76 2 года назад

I saw this tip on Tiktok and immediately ordered one. The problem was the original tip was for the non-tapered version of the filter. It didn't fit in my BX2380 even after trying to modify it. So I then ordered the tapered one, and it fit perfectly. Fast-forward a few days, and I was in a hurry to mow. I topped off my tank with diesel and then promptly forgot to put the fuel cap back on. I mowed my two acres, parked my tractor and then noticed my boneheaded move. I looked inside the filter, and it was full of grass clippings and debris that would have ended up in my tank. Even with having to buy two of these at $12 a pop, it was money well spent.

@edkern0749 2 года назад

I bought one of the tapered filters for my L3901. No Bueno. The small end ~2" diameter is bigger than the inlet.

@AnomadAlaska 2 года назад

Amazing. Selling a product he doesn't sell. The guy (Neil) can't stop selling. My Kubota mini-ex came with a plastic equivalent of that from the factory. It's amazing how a dead insect or pine needle finds its way in there occasionally.

@MyClutteredGarage 2 года назад

Great video, Neil, and great shout-out to Jon! 👍

@whiz3528 13 дней назад

After having several months problem with our L3301 just running out of fuel for no reason and weeks at the dealer trying to figure out the issue it was discovered that there was trash and a glob in the tank that would restrict fuel flow. I from the beginning said there was something in the tank. I purchased a special plastic funnel with a built-in micron fuel filter, no more problems.

@JeepinMaxx 2 года назад

I picked one up a while back after watching Jon Ritter's video - works great!

@gordini228 2 года назад

Caution! I liked the idea and went for it. While installing it I looked a bit askance at the plastic like material (I now think silicone) around the top flange, wondering if the diesel might break it down. Decided to keep an eye on it. Just a few days later I saw that silicone off the filter and in the cap. At first didn't know if it was all there and was afraid part was in my tank, but I now see it has a groove such that it covers top, side, and bottom of the metal flange, so I think I've got it all. It had swelled a great deal, I assume due to the diesel, and came off in the cap. I feel lucky it didn't go the other way into the tank. I suggest you strongly consider removing this silicone before installing. I'm guessing nothing will go wrong with the stainless steel, but I'm sure going to watch it.

@wildbill23c 2 года назад

Just make sure you don't take that coffee filter back in the house after using it for diesel or gas, it may cause some sort of weird taste for your coffee HAHA!!! I ordered one as well for my BX. The fuel can I use has kind of a screen in it but the holes in it are pretty large...the coffee filter would work much better for fueling purposes. I can see this working well for Jon seems how he likes to not put the fuel cap back on his BX after refueling LOL.

@donaldspaulding5817 2 года назад

This would of helped when i rented a small kubota from home depot, it kept cutting out after a few minutes run time. Turned out there was a bee in the gas tank that would block the fuel outlet while running. They were not helpful, but I found out later from another employee about the bee. Definitely don’t want debris in your tank! Cheers from Calif.

@johnmedlin5894 2 года назад

It is a great idea, really surprised that Kubota did not put one in the fuel opening anyway. My Massey Ferguson 1740M came with one.

@bwax1542 2 года назад

I did something similar, I took the "prefilter" fuel filter out of my old B6100HST-E diesel tank to see if it would fit in my new Z781KWi gasoline tank. It did fit, so I ordered a new one for my Z781KWi. Glad I did, cause I have already caught and kept trash out of my Z781KWi gasoline tank.

@ChronicBongitis420 2 года назад

Does Kubota pay you every time you say z781kwi?

@Treeplanter73 2 года назад

I made the same mistake and ordered the nontapered version, then saw the Ritter video follow up version and canceled that order and reordered the taper. Great tip for getting more life outta your diesel filters. Thank you

@wagonbldr 2 года назад

I did the same exact thing. Hopefully same a headache down the road.

@farmingsmallkubota1783 2 года назад

The Military has a removable strainer on every piece of equipment so makes sense

@je1279 2 года назад

Great idea Jon and thanks for sharing Neil. I've had cap o-rings fall into fuel containers before and this is a perfect solution to prevent them from ending up in the bottom of the fuel tank on a tractor.

@tractortalkwithgary1271 6 месяцев назад

Well I have an L2501, a RTV 900, and a GR 2120. The GR 2120 is the one that is currently the one I am having issues with. I think I have some debris in my tank. I will be flushing my tank and back flushing the fuel line and all of my Kubota equipment will be sporting the new Jon Ritter filter

@RossOnTheLand 2 года назад

Good Job Neil and Jon is great as well.

@wink9970 2 года назад

Nice info. Good on ya.

@TheSailingwoodworker 2 года назад

Just YESTERDAY for the first time I dropped a vent cap into my B7500 tank after owning it for 14 years. Because the fuel tank has an offset neck I can't see it so I might have to pull the tank to retrieve. I'll be looking into one of those coffee filters.

@michaelfinney2160 2 года назад

The non tapered version worked for my BX1870. Doesn’t seem to slow refueling from a 5 gallon container. Believe this is a pretty good idea 👍

@miano07 2 года назад

That's awesome with the filter. I've been on the look out for a solution like this. I was thinking to put a metal mesh screen on the top of my fuel thank because when I fuel my tractor at night, I ALWAYS RE-FUEL when my job is done before leaving for the night to prevent moisture to build up. So at night, I always have an LED lamp that attracts a lots of bugs. So when I'm looking inside the fuel tank to make sure I don't overspill, it's attracting lot of bugs. And I'm concerned these bug can make it through and clogg my fuel like line. Using this file will definitely be a great solution. Hoping I can fit it on my M5. When not I'll just by a similar small match screen and pre-cut it my self and put on the top of the fuel reservoir before re-fueling. But thanks for sharing that details, it's very helpful.

@tomcurran8470 2 года назад

Yes! I never thought about bugs.

@janicewessel9603 2 года назад

My 180 Mitsubishi tractor came equipped with the strainer new back in 1984

@tommybounds3220 2 года назад

Thank you for the video

@dngendron 2 года назад

Pretty sure I saw this on Facebook way before John Ritter picked up on it

@keevanabramson7126 2 года назад

I have a very large funnel with a snap-on screen available Amazon (FloTool 10705 Giant QuickFill Funnel). It costs about $9.00. I screen the fuel transferring it from a 5-gallon tank to a 2-gallon (I have a couple of these so I do it first and it's lighter to lift ) and then again from the 2-gallon to the tractor. This helps avoid spills and is so easy, topping off at the end of a day is a breeze The coffee filter probably has a finer mesh but I wonder if it is necessary.

@claudenormandeau9211 2 года назад

Thank you Niel.

@hphillips7425 2 года назад

It should come with the tractor. My B7100 had one but my B2650 purchased in 2019 does not

@DelawareDevil 2 года назад

Neil, You can't pump diesel through it from a service station pump. The filter makes the fuel back up and keep shutting off. I would think it would be great for catching things falling in the tank like the little whirleybirds while filling with a 5 gallon can.

@henrymorgan3982 2 года назад

If yours does not fit in the fill hose, get a funnel that mates with it OR just use it when filling only and keep it in a ziplock.

@halsnyder296 2 года назад

I started with the cylinder… didn’t fit the BX, but dropped right into the RTV. Got the taper for the BX

@edwarddherde9536 2 года назад

I think I will ick one up for my exmark thanks for the tip Neil

@PaulSuitor 2 года назад

I have now bought two that were wrong, first was not tapered, second was to large. I have now learned that if it says "wide mouth" it won't work.

@chrisweihe9598 2 года назад

Thank you for sharing this information

@icehog2367 2 года назад

My 1977 Yanmar 240D came with that from the factory.

@justindavis1546 2 года назад

Saw the idea on a tractor forum about six months ago. Still haven't ordered one for myself.

@Mark-Aussie1529 2 года назад

Now Everyone wanting those screens, will end up taking the required caps off the stock in your yards.

@hightower2537 2 года назад

came standard on my 86 Kubota. stop being cheep ;)

@jeffsteiger 11 месяцев назад

The real question is why the hell the manufacturer doesnt provide this from factory for such a common issue.

@JimsEquipmentShed 2 года назад

My H6200h has a strainer in its tank, I often wondered why they don’t all have them. My Unimog had one, and that was followed up by a system of three filters, and a water separator…..

@MJADoingStuff 2 года назад

Great idea 💡 you guys😁👍🚜💨🍳

@tpfromcentralpa1692 2 года назад

Ummm, that stainless on the plastic tank top without any o-ring would be a leak point(if left in all the time) I would think, that is why the cap has a seal.......

@JCWren 2 года назад

"Strainer".

@jaytomson7052 2 года назад

That is the correct terminology.

@gilbertcammarn874 2 года назад

That's a nice things to have. It seems it should fit my bx1880

@lwilton 2 года назад

Sounds like something your neighbors at Tractor Supply should start carrying for $14. :-)

@bobrohrmann1518 11 месяцев назад

I guess this is a supply/demand issue, but the filter is now double in price from a year ago.

@tomcurran8470 2 года назад

I have. Solid/Yanmar and this wouldn’t work as the filler neck is small. Great idea though.

@BarryWatson57 5 дней назад

I went out and took a look at my L2502. It looks like a much smaller cap. I measured the inner opening and it's only 1 11/16' wide. Much smaller than the product's description on Amazon. I guess I can't make this mod.

@AJmx2702001 2 года назад

Interesting setup and simple and i see a lot of guys with Diesel power marine now make their onw fuel polisher systems . Which is what i am leaning towards doing which i can do for around 100$ depending on what i get for filters to use . Otherwise its just a generic inline type pump and some hose

@_AndromedaGalaxy_ 2 года назад

how do you polish fuel?

@daveschmidt5713 2 года назад

@@_AndromedaGalaxy_ You first have to buy a left-handed smoke shifter.

@AJmx2702001 2 года назад

@@_AndromedaGalaxy_ System that uses a electric pump to push fuel threw water serprator, then at least 2 or 3 filters of different micron sizes. So it would catch any kind of Contamination in the fuel. do a youtube search on fuel polisher system there are many DIY showing them

@jimputnam2044 2 года назад

Was not that long ago most equipment came with a little screen like that. It looked like some kind of nylon mesh, could be removed and washed out.

@brianhillis3701 2 года назад

I want to try this. Had a spider jump into my tank the other day.

@bobbyjoe6250 2 года назад

Obviously this is a great idea so tell me why Kubota and others don’t put that screen in the tank. My Kubota dealership told me that fuel issues caused by trash in the fuel system is the leading problem with their tractors. Maybe that’s why they don’t include one, what do you think?

@twinbrookacres 2 года назад

I'll have to find the video on Jon's channel. I haven't seen it. I wonder if it will fit my Massey GC2610. Only one way to find out!

@jhs5238 2 года назад

Neil, you were standing next to a L3560. Does it work on those? Thanks. Great video as alway.

@MessicksEquip 2 года назад

No, fuel neck is different.

@HawaiiSustainable 2 года назад

@@MessicksEquip Do you know if it fits standard L? Or if a factory fuel strainer is available?

@scottlamers 2 года назад

Doesn't work on the B2601. Need to find a filter with a 2" opening..

@tomkrzemecki5166 2 года назад

Can you send me the Amazon link to the filter that is Tapered on the bottom? Or, send me a Amazon description. I have a L3800HST.

@dewenstuff7894 2 года назад

As someone who had to have his tank pulled due to an obstruction it's money well spent.

@Primerk5 2 года назад

my b7200 has a plastic strainer from new. Kubota P/N (35450-41350) Any reason why and when they discontinued these coming with new machines. Heck my IH TD-6 series 62 has a metal one and that machine is from the 60s. Edit: that P/N was superceeded by 35450-41060 So you do sell them Neil! just a bit more then $12

@MessicksEquip 2 года назад

man this video needs a follow up! Learn something new every day.

@MessicksEquip 2 года назад

I went and got that one out of the bin, it's much smaller, wouldn't fit in this tank.

@Primerk5 2 года назад

@@MessicksEquip I wonder about other sizes for maybe other machines that might be out there. Thanks for looking!

@danielrapoza8468 2 года назад

Thank you Jon for this tip & Neil for sharing it for us !!! Does anyone know if this would fit an LX2610 or LX3310 ? Thanks...

@theSkavenger84 2 года назад

Following this comment

@quick1hahaha 2 года назад

It is too big for my B2650, only goes in about 1/2 way.

@jifi-0178 2 года назад

I tried one out on the predecessorof the LX tractors which is the B2650. The tapered filter only goes in about 3/4 of the way in the filler opening on my tank before it stops. It is better than the huge funnel with a screen that I was using as a temporary solution. I'll still use when fillling, but can't keep it inside the tank and still put the cap on.

@ginnymartin2595 2 года назад

Purchased one from Amazon, too long to fit fuel tank on BX2660. Be careful.

@paulsalb1686 2 года назад

It is not a filter it's a strainer as a fuel strainer

@case85xtfan33 2 года назад

Flys lady bugs and ear wigs

@LeMecanoDuDimanche 2 года назад

For some reason, my Kubota B7100D is already equiped with a screen. It looks factory, but I am not sure, since the fuel cap is wrong, on the other hand

@johnhanchar3332 2 года назад

Does these fit the MX series? How long until Kubota buys this coffee filter company, puts the filter in an orange box, and starts charging $79.95 for it?

@herberthoff2590 Год назад

I bought the 1 quart version (tapered) for my L3560 LE. So far I can not get it to work … diameter of filter is too large.

@Eddie-yc5yd 2 года назад

I have the cap that will not work on my zd 1021. Where's the part number for a cap that will work? By the way, great video.

@fhuber7507 2 года назад

My tractor came with similar installed by the factory. First time I put the nozzle of the 5 gallon can in, it pushed the thing on into the tank. A REALLY annoying thing to get back out.

@jeremysecrest7553 2 года назад

Will this keep coffee grinds out of my diesel tank.

@travelinthru9519 2 года назад

What is the micon rating?

@rajprashanth5476 10 месяцев назад

Can we use the same for my Toyota Highlander 2023?

@balljar7546 2 года назад

I bought a large 12 quart funnel that has a fine mesh screen at the bottom, and fits perfectly over the fill spout without touching the hood metal and won't tip over. I can use my cans now without the leaking spout and pour just about as fast I can. 27 bucks on Amazon, funnel king 94469.

@DANG-- 2 года назад

Is the coffee filter going to be “eaten” away by diesel fuel? Or better question how long do they last before diesel fuel causes it to break down? Or should we just replace it every 5 years? 2 years? 10 years?

@bahabob1386 2 года назад

diesel won't eat stainless steel

@DANG-- 2 года назад

@@bahabob1386 Thanks. I did not know what they were made out of.

@DANG-- 2 года назад

@John Sorel great thanks for the information I didn’t know what they were made of!

@dougcobb8114 3 месяца назад

People are tired of the filter under the mower/tractor..with limited space and pain to change...Should be a retro kit to correct this design fail...Wish bought a massy ferguson...have easy filter and higher pump pressure!

@cangri1054071 2 года назад

Will it work on l2501 ?

@edkern0749 2 года назад

I would guess not as it doesn’t fit in my L3901

@zoidsfan77 2 года назад

Do these not have tank screens? My Kubota B2401 has a screen on the tank that does exactly as the coffee filter does.

@phild9813 2 года назад

Curious why you would leave it installed all the time? Seems like the dirt, bugs, etc. that you catch might end up breaking down into smaller bits and eventually fall into the tank anyway. Thoughts?

@MessicksEquip 2 года назад

You'd dump the stuff out that it catches.

@clubcar6130 2 года назад

What is the part number for the cap that this works with? It's not in the description like you said it would be?

@ronkitchin65 2 года назад

Would this work in a lx2610?

@tonybrown8574 2 года назад

Can anyone tell me about the mr funnel that claims to filter water from diesel fuel. I bought one with no success. Great video

@davidhorne2326 2 года назад

I have one (I think it’s the same one) and it’s just ok. Not sure how it traps water, but it does seem to catch particles. My biggest complaint is how it leaves fuel in the bottom of the screen area.

@tacticalchef3369 2 года назад

After a couple of frustrating incidents where the fuel line became clogged where it left the tank on my BX, I changed diesel suppliers and I filter every drop of fuel through a funnel with a clean cotton rag in the bottom. This screen would also work. I have been looking for a locking fuel cap. Does anybody make one?