🎥 How to Make 3D Hologram Projector with Resin (Super Clear) - Resin DIY 

I tried this and here are some tips for the ones who are planning to do this: 1. Don't be like me and buy a thick plexiglass if you don't have the right tools to cut it. So basically I didn't realize that the plexiglass that was used in this video was that much thin and I bought a plexiglass for about 2.8-3 mm thick and the cutting part was so hard. 2. Be very careful while you are drawing the 0.15 part because if you don't draw them just the same it will be hard to tape them together after you cut them and it may not be balanced if you don't draw them same. The ones that I did weren't the same so it ended up being a bit unbalanced but it stands on the phone perfectly fine. And if you don't draw them same there can be some gap between the two plexiglass and if that happens the resin and hardener can leak through those gaps so be careful about that too. 3. You don't really have to put the resin and hardener but I can assure you that the image is definitely more clear. 4. And if you didn't understand what he did on 1.41, you are not alone cause I didn't understand too but what i did there was: I got a piece that could cover the bottom of the hologram from the pieces that remained after cutting the plexiglass and I glued the piece under the hologram with a silicon gun don't worry I was able to take it of when the resin was dry enough to not to leak from the bottom 5. I actually didn't use the measurements that was given in this video for resin and hardener but instead I put the resin two times more than the hardener ( actually I guess this is the right ratio for resin and hardener but idk) 6. The resin and hardener mixture that I used took nearly ten hours to dry and I left it near the window (I thought fresh air may help it to dry faster) but drying time may last different depending on the resin and hardener that you use 7. Don't sop in your fingers to the resin it doesn't come of very quickly I guess that's all,but you can ask questions if you have any:)

I am currently making one out of glass. But I would be open to making a resin hologram. Thanks for the amazing idea!

Absolutely majestic! Beautiful job.

man-ive burnt many brain cells watching resin tutorials for hours tonight trying to get influenced-but this blows me away

Красота!!!!👍🤗

That is very cool!! I gotta try this!!

i like how the edge display on that phone just goes off to the side. very practical.

Really it is Amazing this is the best 3D holography I have seen and helpful to explain... Thank you a lot

Amazing! Thanks for sharing it!

Sooooo very cool. Beautifully done.

Its super satisfying thanks bro

Wicked cool!

I made one of these with clear plexiglass, but due to the thickness, I got ghost images. After searching for a thinner plastic sheet, I came across this video, which convinced me to go with the resin result. It is the clearest and easy to clean, and the projected image seems to be in the center of the prism.

Oh this is just gorgeous...

Parabéns pela idéia....obrigado!!!!

wow ! best 3D holography i have seen..

Very good tutorial, thanks alot

Omg, I have to do this!!! Thanks 👍👍

GOOD WORK 🤯 ❤

Very nice!!

muito bonito e criativo!!!

Very good makes a change from dried flowers.

Fantastic mind blowing 😍

Awsome bro

c'est magnifique

Muy buen video gracias, ahora puedo ver figuritas bien facheras facheritas

Ótima ideia!! ❤️

it's amazing,,, keep it up, buddy.

Dis is awesome

v.v. amazing

very clean work man

Just loved it

thank you for the tip I really needed that I need a scale

Great Job Very Nice Video

Its littttttt~

Hello!! That's amazing! I mde it for poject for School an it really function 😁😁😁

Wonderful!

Wow!!👏

Wooooow😲😲🌹🌹thanks dear

oh, wow! this is great! great idea!! blessings from KY

So cool 😊 👍

Very nice 👍👍👍👍👍

Amazing

It is preety cool

amazingggggggggggggggggggggggggggggggg!!!!!!!!!!!!!!!!!!!

I was roaming here and there for measurements😅.. finally got it

Very good🎉😊

Thanks for sharing.

こんな方法が、ありましたか 　簡単で良いですね

عاشت الأيادي علئ عملك الجميل

amei

Crazy!

It's the future Thank's Keep It up ✌️.

That's so great. good technique. I also do art like you

Good

Thanks for this vedio

dope

Super bhayya

Use to do up one of these with laminate but this looks amazing

This is very cool I'll probably do this myself. It really isn't a hologram, but still... very cool.

Muy bonito ingenioso y sencillo

It is a projection Head Up Display (HUD), the same as on an inclined car windshield or airplane cockpit, in which optical information is reflected from the source. It is better to use one small oblique sheet of glass. For a test than to produce a complicated sculpture from plexiglass, because the disappointment of depiction and the work involved is great. It's a lot, far away to the hologram and nice just on the PC monitor. :)

I had the same idea..it would make a great hologram...

إبداع

Wow this is amazing. Do you sell that resin mould already made? I need yo buy one as i dont have time to make one :)

una maravilla , me encanto

Супер!

Es lo maaas ermoso del mundo entero

Hi bro I'm here for 1 like . Great work👍

Wow

Магия )👍🏻

En résine c'est quand même plus beau.

Same Idea came in my mind earlier but I don't have enough resources for doing this. Thanks for implementing this. Now I am satisfied 🙏🏻 One day I'll make video on same🙏🏻

I wonder if you made 2 and bonded large tops to each other with uv resin would it show on top also

One of the better diy pyramid vids but it does not give the effect of free floating now but rather embedded inside like a tilted screen. Still very impressive

Que heemoso te quedo a mi me salio diferente me gusta ❤️

Omg😍😍😍😍😍😍😍😍😍♥️

What measurements and what angles does the pyramide have? Thanks for answering

..Simply mind-bending!!!....Where to get that epoxy rain and hardener from and how long it takes to get hard? 👌👍👌👍

Fantastic, thank you

Been waiting to bring back Michael Jackson

​We just tried a 3mm plexiglass. There is no way one can cut this with a simple box cutter (or an acrylic cutter for that matter). Either you used way thinner plexiglass, or a laser cutter (or both). We tried it with CD cases and a box cutter, and the cuts certainly looked rough. The project still works but we could have avoided to pay $19 for the 12x12 plexiglass sheet that's linked in your material list. Love the project, though!

Wao mi respeto💪

Hello @Buzzingfish great video. I would like to know why you mentioned other things to buy in description like flower drying crystals, and other colour kit. Is it sufficient to buy Clear epoxy art resin + Hardner? And do as you shown in video. Please educate me as I am not asking you not out of knowing but I am making the product so it's important. Please reply back. Also mention how long it takes to dry at room temperature?

🔥🔥Awesome🔥🔥!!!Sir can u please tell me what u stick on the top of the pyramid with glue and how do u remove it?? @2:30

Like a live action playset

It's amazing... Plzz Can u share the amount of epoxy resin and hardner u took... I'm totally addicted to ur videos.. Keep uploading more videos..

【質問】そのスマホの機種・スクリーンの大きさはどれくらいですか？

You used a 3:1 ratio with your resin but the resin you linked to says to use a 1:1 ratio. Which is correct? Is the linked resin the one you actually used? Thank you!

Much easier to make out of clear transparency sheet. Draw two pentagons 12 mm inner side and 72 mm outer side in a CAD application. Print on A4 paper and place the transparency sheet on top cutting out the profile with a utility knife. Score the fold lines with scissors. Fold into a pyramid and join one end with sticky tape.

Not bad at all. You can only reflect the projection inside with a pyramid shape, then you don't need to look at it mirror-inverted. The viewing angle also changes. If you then put a magnifying glass between the projection and the glass, it will be even better and sharper, even if you stretch, stretch and pull the projection and adjust the magnifying glass. A magnifying glass is a 3d hologram projector and has been around for a long time. That would be the economy version. Now the energy version , that could then be built huge because there is more light behind it for the projections.

Is it necessary to build a pyramid? Or can u make the corners round?

How does it look like from the top or side top angle?

OMG😮 sir please teach me say material name I am trying that's really cool

Can I use a whole solid glass pyramid at first place instead of plexiglas and resin?

i wonder if making a resin mold out of the negative space would produce the same holographic effect.. if that makes any sense at all

This video is super fabulous!! I have one doubt: you used a 3:1 ratio for resin: hardener in your video. However, there are resins with a ratio of 2:1/1:1 available in the market. So is it suitable to use them for making Hologram? Waiting for your early reply as I have to make one at the earliest. Thank You!

某家手機 已有類似投影的技術 可以期待未來發展

Friend, where do you get those, in pharmacies, hardware stores or manual materials?

Bạn ơi xin cho mình hỏi bạn đổ chất gì lỏng lỏng để tạo thành khối thế, cảm ơn