Тёмный

🔋 How to choose a battery: A battery chemistry tutorial 

Afrotechmods
Подписаться 794 тыс.
Просмотров 216 тыс.
50% 1

A beginner's guide to different battery chemistries and how to choose the right battery for your project.
More videos at www.afrotechmods.com
Battery chemistry summary: i.imgur.com/4SJNKPN.png
Panasonic Eneloop low self discharge NiMH batteries: www.amazon.com/exec/obidos/ASI...
Lithium protection circuits: shrsl.com/?e9pf
More info on the NiCd memory effect versus phenomenon perceived as the memory effect:
www.hardwaresecrets.com/articl...
www.repairfaq.org/ELE/F_NiCd_B...
Intermission music: www.bensound.com
LiPo explosion video: rcexplorer.se/

Наука

Опубликовано:

 

30 июн 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 209   
@Afrotechmods
@Afrotechmods 9 лет назад
One of my viewers wrote a nice email talking in more detail about lithium battery issues and I thought I would repost it here: Hi, I just thought I'd respectfully chip in some thoughts on your new video. By way of background, I am one of the co-founders of QFE - a battery engineering startup in Hong Kong. We develop proprietary technologies for large battery systems to make them safer, more reliable, more energy dense and more cost effective for OEMs to deploy. Our team is comprised of mechanical, electrical and chemical engineers, and I have recommended your videos to the guys less inclined with electronics to watch in the past. I think one issue which you addressed very well is the fact that the inherent safety of a particular chemistry is less important than how the batteries are used. 100% agreed. Two issues I thought I'd point out: 1. 'Lithium polymer' isn't a specific chemistry, per se. The underlying cathode chemistry of 'lithium polymer' batteries is 'lithium-ion', which is a broad, umbrella term covering lithium + a combination of cobalt, manganese, nickel etc. Lithium polymer refers to batteries of 'lithium-ion' chemistries that are physically packaged in a pouch form factor. 2. Pretty much every battery chemistry out there has the potential to explode or catch fire or do both, if used incorrectly. Even lead acid batteries can explode too, as hydrogen - an explosive gas - can be produced as a side product. Pouch cells are as unprotected of a battery construction as battery constructions get. Sheets of active material loosely contained between two insulating sheets. As an analogy, that's like sticking petrol in plastic bag, tying a knot and using that in your project. Lithium iron phosphate batteries in pouch form can puff up and explode too (noting the distinction between an explosion and a fire). Lithium-ion batteries also come in small cylindrical constructions. These are incredibly safe, for four primary reasons: i) The outer casings are incredibly hard to compromise/pierce. Really, really hard. ii) The shape of the cell makes it difficult for objects to hit the cell perpendicularly; blows are typically, glancing. iii) Unlike pouch cells, all decent small, cylindrical li-ion batteries have a safety vent, which releases the internal pressure of a battery cell in a controlled way, if the pressure builds up to dangerous levels. iv) Decent, small, cylindrical batteries also build in a PTC, effectively disconnecting the battery from an electrical circuit if it gets too hot, hopefully preventing any further damage to the cell. We're fans of small, cylindrical lithium-ion cells for other reasons as well: cost, weight & volumetric energy density, availability etc. Hopefully this is helpful and not spammy. Do please be in touch with me if I can help in any way. Please keep up the great work with the videos - easily the clearest, most easy to understand electronics videos on the internet. Best regards, Brandon Brandon Ng CEO QFE qf-eng.com
@latebloomer6957
@latebloomer6957 9 лет назад
Thanks for the enlightment...you guys are the greatest ....like edisons sharing your knowledge for the good of the planet
@NoorquackerInd
@NoorquackerInd 8 лет назад
It doesn't show anything?
@GeoMatRay
@GeoMatRay 7 лет назад
Thanks for posting this e-mail, it cleared up my confusion with Li-ion and Lipo batteries. I've heard other explanations but am inclined to take the word of someone actively working in the industry. As he points out, a battery of any technology can explode or catch fire. A friend of mine was loosening a big lead acid battery's connectors with a long wrench, and while turning the thread of a terminal, he accidentally shorted it. The battery exploded into pieces.
@rivergodland614
@rivergodland614 3 года назад
I just finished watching all your basic electricity videos and I feel like I am finally beginning to actually grasp electrical units. I haven't heard it explained so well anywhere else, thank you so much.
@DIYPerks
@DIYPerks 9 лет назад
Do you know of any good circuits that can charge NiMh batteries and automatically stop when finished? I was under the impression that it's quite hard to detect when the battery is full, but it would be super useful to permanently build them into projects rather than relying on an additional charger.
@OpenGL4ever
@OpenGL4ever 7 лет назад
Search for Delta U cutoff.
@ahmedabdelaalweb
@ahmedabdelaalweb 11 месяцев назад
🤯 When you randomly stumble upon an 8 years old comment from your Guru @DIYPerks on another channel. Keep up the wonderful work guys. You’re a great inspiration. I’m grateful for all the invaluable knowledge you freely hand out to us. Thank you both
@KrisBlueNZ
@KrisBlueNZ 9 лет назад
NiCd cells are deprecated because cadmium is a problem in the waste stream and prohibited by RoHS. AFAIK SLA batteries are nowadays called VRLA (valve-regulated lead-acid). Battery capacity specifications in eBay advertisements are often exaggerated. Very useful video!
@ruveeda
@ruveeda 9 лет назад
I absolutely love this channel... The videos are informative and fun to watch at the same time... thanks man....
@chawkzero
@chawkzero 9 лет назад
That was supremely awesome and helpful. I've always wondered about the various battery types, including the oddballs like NiCd. Thank you for the video!
@Caleb5761
@Caleb5761 8 лет назад
Very high production quality. Very informative. You just earned my sub!
@Afrotechmods
@Afrotechmods 6 лет назад
Interested in learning about wireless power? Subscribers can get up to 80% off my course Wireless Power to the People - Wireless Charging 101 on udemy using the coupon code "RU-vid" www.udemy.com/wireless-power-to-the-people-wireless-charging-101/?couponCode=RU-vid
@MrOpenGL
@MrOpenGL 9 лет назад
Nickel-cadmium are also very good at performing in very cold weather, have their output voltage quite stable during discharge (in contrast with for instance alkalines and lead-acid) and can put out serious currents (20A for a small AA battery!)! I love them!!
@MephistoRolling
@MephistoRolling 9 лет назад
you definitely have the most useful tech vids.
@DimitriPappas
@DimitriPappas 9 лет назад
tech is a very broad term... not too sure about that
@MephistoRolling
@MephistoRolling 9 лет назад
yeah wasnt sure what term to use when i wrote it, but i definitely find them the most useful for when i am making stuff.
@lfcbpro
@lfcbpro 5 лет назад
tutorial after battery options was a really good help, thanks
@mrnikku6381
@mrnikku6381 6 лет назад
afrotechmod.............your explanation is really very awesome ......keep it up
@difacilprojects6676
@difacilprojects6676 9 лет назад
Love your videos! very easy to understand even with my not high level of english, regards from Spain!
@govindmukundan5003
@govindmukundan5003 9 лет назад
Awesome video! The "puffy-battery-if-discharged-too-low" issue with LiPo is something I learnt the hard way :-)
@gorursuresh4246
@gorursuresh4246 2 года назад
Excellent tutorial,thanks
@Bylga
@Bylga 9 лет назад
Another awesome video!
@balazsklezli5702
@balazsklezli5702 Год назад
really cool video :) thanks for sharing it!
@ryharpon
@ryharpon 9 лет назад
Another great vid! Thanks!
@Cryptovariable
@Cryptovariable 9 лет назад
Thank you for captioning your videos.
@DerZorroCat
@DerZorroCat 9 лет назад
What an adorable intermission.
@giomjava
@giomjava 8 лет назад
Beautiful!! learned a lot! Thanks!
@caseybalvert7161
@caseybalvert7161 9 лет назад
Great info. I always find your videos informative. Thanks.
@ForViewingOnly
@ForViewingOnly 9 лет назад
Excellent video Afrotech, it taught me exactly what it promised to teach. Thank you. As a suggestion for a future video, could you explain converting (modding) circuits from Alkaline/Ni-Cad-powered to Lithium-powered? As a simple example, an LED torch that runs on 3 AAA batteries - how to modify it to run on an 18650 cylindrical li-ion battery, bearing in mind that (so I've been told) using an Li-Ion could overheat the LED due to internal resistance/current differences. Thanks.
@ilike600baud
@ilike600baud 9 лет назад
Posted on the Hackaday blog! Congrats!
@seifamgad9568
@seifamgad9568 5 лет назад
This was very helpful. Thanks
@nihalrevankar5658
@nihalrevankar5658 5 лет назад
Thank you for this video!
@risebug3
@risebug3 9 лет назад
Great guide.. Thanks!
@endoscopisis
@endoscopisis 9 лет назад
excellent tutorial
@matthewludivico1714
@matthewludivico1714 5 лет назад
Great guide
@Tanoforfucksake
@Tanoforfucksake 6 лет назад
I've been watching a ton of videos trying to understand batteries. Your videos are by far the best I've seen. Trouble is, I'm still not fully understanding. So I really like the new "Soundboks 2" portable Bluetooth speaker, but the device will easily run me over $900. Money I don't have. I've decided I'd take it upon myself to build my own bluetooth speaker that could "somewhat" compete with the Soundboks for my own personal use & affordability. Anyway you could help??
@biturboism
@biturboism 9 лет назад
YES! Thank you!
@MatheusLeston
@MatheusLeston 9 лет назад
great stuff!
@movax20h
@movax20h 5 лет назад
You only looked at rechargable batteries. For non rechargable stuff, most people use Alkaline or Zinc Carbon batteries, but for very long term operations (small self discharge), high energey density (very high), or operation in harsh temperatures, I would recommend looking into Lithium Thionyl Chloride (LTC) chemistry. It has a lot of advantages, and are on average 3-8 time better than alkaline in many applications (especially low power or periodic pulsed power situations). In fact they do have higher energy density than Lithium-ion or Lithium-polymer batteries. Also bundling Lithium-ion and LiPo batteries in one category is a mistake. They are quiet different, as the first one denote ones with liquid electrolyte, and second with polymer membrane. They do have vastly different properties in general.
@j-roadtrip1244
@j-roadtrip1244 8 лет назад
thanks for this video :)
@jwcrawley
@jwcrawley 9 лет назад
Great video. Perhaps you could touch on NiFe batteries for home power storage?
@Xenro66
@Xenro66 9 лет назад
Man, I love your channel so much.... I'm really tempted to become a patreon of your channel, but I have no money (for myself) at the moment :(
@andiyladdie3188
@andiyladdie3188 8 лет назад
I like the intermission :)))
@xvillin
@xvillin 5 лет назад
Nickel cadmium batteries are used quite a bit on aircraft because the batteries provide the starter motor with electricity. These are quite hefty starters and nickel cadmium batteries can provide consistent voltage till they are almost drained. However, many people are starting to go over to lithium ion.
@AidanGieg
@AidanGieg 9 лет назад
Never been this early to see your video!
@tanmaychandak8314
@tanmaychandak8314 9 лет назад
glad i could make it this early too.
@creeper073
@creeper073 9 лет назад
li-ion charger circuit tutorial pls :D Love your videos very informative and understandable :)
@101AOK
@101AOK 9 лет назад
Nice job
@DavidisDawei
@DavidisDawei 9 лет назад
I enjoy your videos - Thanks! Have you worked with any good alternatives to the battery? Batteries are almost always the "weak link" (most limiting variable) over time
@OpenGL4ever
@OpenGL4ever 7 лет назад
Fuel cells, a diesel engine or super capacitors might be an alternative to batteries.
@vivekshettigar8051
@vivekshettigar8051 8 лет назад
great tutorial.....can you please provide some insights on Lithium Titanate batteries as well, in comparison with the others mentioned in the video...thanks..
@Zebra_Paw
@Zebra_Paw 4 года назад
For LiPo we never discharge under 3V in use but to damage it you have to discharge it under 2.5V. Ni-Mh batteries have memory effect!
@patriotbarrow
@patriotbarrow 9 лет назад
2:49 Quite glad to see a Romanian battery in a clip. :)
@BegovNorbert
@BegovNorbert 4 года назад
Same thing i had in mind :)))
@jordanalexo550
@jordanalexo550 9 лет назад
Great video. I have a question, why do lithium batteries commonly found in cellphones seem to get easily addicted if you don't fully use them before you recharge each time? I thought they didn't have that memory problem you mentioned. Thanks
@saibhakt1465
@saibhakt1465 3 года назад
nice video ... interesting 👍
@proyectosledar
@proyectosledar 9 лет назад
My bike has a lifepo4 and has electric start. works well for now. Have a video of it.
@jeronimomurruni
@jeronimomurruni 9 лет назад
Proyectos LED Every video I go, every video I see you. :D
@brandonl9362
@brandonl9362 9 лет назад
Brilliant! I love your videos! Informative and entertaining, and I'm not even a cat person.
@power-max
@power-max 9 лет назад
The memory effect for NiCds does not really exist unless you consistently and always only discharge it to the same point (within 1% tolerance) many, many times. It was actually NASA that noticed this with drills they used for some missions. (They noticed that after many hundreds of cycles, the batteries mysteriously lost capacity to the point it they were being discharged to.) I believe it is also possible to undo it.
@OpenGL4ever
@OpenGL4ever 7 лет назад
I never had good experiences with NiCds. They always run out of energy very fast directly after loading. Later i found out in the newspaper why -> memory effect.-
@power-max
@power-max 7 лет назад
OpenGL4ever The "memory effect" is more-or-less complete BS, a very popular myth surrounding it. It originated from NASA research with purposely oversized batteries being discharged consistently to a particular SoC (State of Charge). The real problem with NiCds is self-discharge, weight, environmental concerns (nasties can be found inside them), weight, low capacity, and short lifetime due to formation of sulphur crystals internally. This last one can be fixed by jolting the battery with a huge pulse of current.
@mr.actiongal1017
@mr.actiongal1017 7 лет назад
good stuff
@trench01
@trench01 8 лет назад
What about making a hybrid nickel cadmium battery could be good if they had a circuit that would not allow you to recharge it unless it was fully drained and the charger would lock it in until till it was fully charged, If someone needed to charge the battery while 1/2 charged the circuit would have a button to make it drain fast or recharge a 2nd battery attached with it as a reserve that would help in the efficiency. Also what about the super capacitors that some use for batteries with special circuits that act like batteries? Aren't those considered the best type since they say electric cars use them? I was wondering fi one of your videos has clues on how to make it which I kind of remember something like that when watching your voltage regulator videos.
@radheshvideo
@radheshvideo 8 лет назад
Hi, Can you please shed more light on the different types of Lead Acid batteries. You are talking more about SLA's but we have the Tubular ones, the traditional ones which require distilled water top ups...., There is also a construction difference between the ones that are used for automobiles and ones used for power storage (Deep Discharge)
@DimasHaryoGustama
@DimasHaryoGustama 9 лет назад
thumbs up for michael bay's explosion joke. i used regular Li-Ion 18650 cell for projects, it's quite good, cheap, and easy to get. more energy than Ni-MH like Eneloops, etc.
@yosefmacgruber1920
@yosefmacgruber1920 7 лет назад
What about super-capacitors for applications, such as replacing the car battery? According to some YT video that I watched, somebody replaced his old car battery, with a in-series bank of super-capacitors, it worked just fine, and it was a fraction of the size and weight of a car battery.
@Aleks6010
@Aleks6010 6 лет назад
expensive
@thejo6331
@thejo6331 9 лет назад
More so than weight, I thought that overall energy density was the main driving factor behind Li-Po battery packs. It's not just that they're lighter, it's that they fit into a MUCH smaller form factor for the same amount of energy storage. This, to my knowledge, is why mobile device engineers prefer them.
@sanketpednekar4036
@sanketpednekar4036 8 лет назад
intermission....hahah.. by the way, the video was really helpful...keep it up and i would like to see more of ur videos..
@SurvivalLilly
@SurvivalLilly 7 лет назад
What about Li-Ion batteries?
@Afrotechmods
@Afrotechmods 7 лет назад
They are almost identical to Li-Po, just slightly less energy density so a little bigger/heavier for the same capacity.
@MCinO11
@MCinO11 7 лет назад
almost all of li-Ion batteries are low drain so yeah, if ur gonna draw 20-40 amps safely you're gonna have to buy expensive Li-Ion chemistries
@piotrlobacz
@piotrlobacz 9 лет назад
Afrotechmods what involves building own Li-ion cell charger? Would you do video about it? Do protection circuits on Web site you've provided are actually church and discharge protection circuits or just discharge?
@siddharthdhamaskar3953
@siddharthdhamaskar3953 9 лет назад
can you make a video on how to build a LiPo battery charging-discharging circuit?
@doobleshoodle
@doobleshoodle 9 лет назад
You forgot to cover the most popular ones (Li-ion). I know they are very similar to Li-Po, but you should have at least mentioned them ! Oh well, thanks anyways. :)
@richardlighthouse5328
@richardlighthouse5328 4 года назад
Li-ion is basically same as Li-Po
@hondaguy9153
@hondaguy9153 8 лет назад
watt hours/gram you can actually get li-ion batteries that store nearly twice as much energy as li-po batteries. the down side is the low C rating on the li-ion.
@RX7GSLSEowner
@RX7GSLSEowner 9 лет назад
So I spent some time on batteryspace.com looking for a Lithium Ion Phosphate (LiFePO4) battery to power a hand held device. However every battery I found had this warning in the description: "This pack is for testing (prototype) only. It has not been UN38.3 tested yet." When I read further, it referred to UN shipping requirements. It also stated that this testing was available but was expensive. Batteryspace is only testing popular, non-custom battery packs at this time. So. The question is: right now I'm in the final stages of development, so the testing thing is ok. But when I go into production, I don't want to have the high expense of a UN38.3 test. At least not all on my own. So what options do we have? Just use a different type of battery instead, say NiMH?
@DarrenC_1024
@DarrenC_1024 6 лет назад
How to chews a battery: Pikachu's diet digest.
@UTubeGlennAR
@UTubeGlennAR 7 лет назад
:) Thank You :)
@HavokTheorem
@HavokTheorem 9 лет назад
Afro, isn't another concern for SLA batteries that they contain.. yknow, lead and sulfuric acid? Maybe not a concern for those small sealed ones, but the battery terminals around cars are often corroded or caked up with sulfate salts from leaking battery acid.
@davidgogelein8392
@davidgogelein8392 3 года назад
@4:40 expensive isn't a pro argument for the lithium cells :D anyway nice and informative video
@berthold64
@berthold64 9 лет назад
If I want to build portable power supply with your buck converter in the previous video, what battery should I use? The load might be around 5V @ 1.5A. cheers
@zaphodb777
@zaphodb777 9 лет назад
Don't forget LSD (Pre-Charged) NiMh are incredibly tough, and more forgiving of overcharge, and over discharge than normal NiMh, due to their thicker separator.
@MegaMechatronics
@MegaMechatronics 9 лет назад
For the lithium batteries, we should add discharge rate as a pro.
@h0lx
@h0lx 9 лет назад
Another great thing about lead acids is their huge current capability, think a hundred amps for a car starter ;)
@caterscarrots3407
@caterscarrots3407 5 лет назад
I have heard of rechargeable alkaline batteries. What's up with that? Is that another way of phrasing Nickel Metal Hydride batteries or is it Alkaline battery chemistry without the "you can't fully recharge a dead battery, only get closer, and even that is theoretical" part of it?
@600guy
@600guy 9 лет назад
Do you know if a lithium or alkaline battery's self discharge rate increases once the battery has been used? Does regular use of a battery impact the self discharge rate (vs. a battery sitting on a shelf)?
@justinp4235
@justinp4235 9 лет назад
I have a few phone batteries lying about, and I wanted to know how would I go about charging them without them blowing up. Can I just straightup connect the phone charger to the battery or would I need to build a protection circuit?
@TheSwissGabber
@TheSwissGabber 9 лет назад
Nice video, only thing missing is the number of cycles.
@surajjanampally7023
@surajjanampally7023 9 лет назад
5 star rating for this one
@BegovNorbert
@BegovNorbert 8 лет назад
That awkward moment when you are from Romania, and the example for a lead-acid battery is a Rombat Cyclon
@mr.simulator4724
@mr.simulator4724 8 лет назад
+Begov Norbert u should ask him why did he use this particular battery, i also know Romanian.
@sdj7122
@sdj7122 7 лет назад
Hello neighbors. Have you ever heard for Black Horse lead acid batteries. It is from my country :)
@dipensinjali4641
@dipensinjali4641 9 лет назад
thanks
@OpenGL4ever
@OpenGL4ever 7 лет назад
@6:26 @Afrotechmods Can't i just put a big capacitor in parallel to get along with the peak amps?
@positivemelon7578
@positivemelon7578 6 лет назад
If you are in the EU use nkon to get your batteries, it's MUCH MUCH cheaper. They sell 2900mAh li-ion batteries for as low as €1,50 and they have really low shipping costs as well (for most orders only €4) It sounds too good to be true but it is not, I have bought a lot of batteries from them and they have all been good batteries (sony, panasonic, lg, samsung) with their specified capacity.
@TheOswald42
@TheOswald42 9 лет назад
so buy bunch of panasonic eneloops, and ram them together to provide adequate power source except for devices that are design to be small and lightweight
@BlahBlahBleh317
@BlahBlahBleh317 9 лет назад
I thumb upped, because of that intermission, jfyi
@RX7GSLSEowner
@RX7GSLSEowner 9 лет назад
Donated through PayPal. Thanks for the videos; keep 'em coming!
@Afrotechmods
@Afrotechmods 9 лет назад
Thank you!!
@xboxlive6
@xboxlive6 9 лет назад
Shipping companies specificity don't like lithium batteries. So getting them delivered to a country that doesn't manufacture lithium batteries can be quite a hassle.
@HW1099Tube
@HW1099Tube 9 лет назад
The mayor downside of NiMh Batteries is, that they do not support high discharge currents, in contrast to Li-ion or Lead Acid Try to look up Peukert's Law for more information de.wikipedia.org/wiki/Peukert-Gleichung#Peukert-Zahl
@BGBTech
@BGBTech 9 лет назад
yeah, that was a factor leading me to use LiFePO4 batteries for one of my projects. I was tempted to use a pile of NiMH D-cells, but was limited to about 16 amps with a single bank, or 32 amps with two parallel banks. (note: AAs are generally only rated for around 1A AFAICT). ended up going for a more expensive LiFePO4 battery, which was a lot lighter, and was rated for 400 amps (more than enough), but has a lower capacity (only 8Ah, whereas I would have got around 24Ah with parallel banks of D-cells). for similar weight to the D-cells, I could use 2x LiFePO4 batteries, and get around 16Ah, but cost would still be a big drawback.
@thundafundamentalist
@thundafundamentalist 3 года назад
1:50 WIthout the Michal Bay Explosion!
@35o125
@35o125 3 года назад
I have a device from which the new batteries are leaking after an hour of use. Namely 'smarty pad', 4 x AA batteries. Would you know why, and if it could be fixed? thanks.
@belalshehadeh1876
@belalshehadeh1876 6 лет назад
What is the best type of batteries to operate a Thermoelectric module (TEC1-12706) ?
@GButtersX
@GButtersX 9 лет назад
Tutorial on building protection circuits?
@ahmadnab7969
@ahmadnab7969 4 года назад
For a device consume 20Amp 12V what type of battery do you recommend as for portable device?
@danielwiegert6067
@danielwiegert6067 9 лет назад
First! And ; Intermission = Coffie time! woho!
@bryansiepert9222
@bryansiepert9222 4 года назад
I miss your content :\
@daineramosquitco5816
@daineramosquitco5816 Год назад
Aluminum-Ion battery: *am i a joke to you?*
@ranz13l1ty
@ranz13l1ty 5 лет назад
Explain the new batteries that don't explode please! :D
@twopiecez5226
@twopiecez5226 6 лет назад
Will it be okay if change my 3amp motorcycle battery to 6amp same size battery?
@bosem80
@bosem80 9 лет назад
i used my old mobile battery on my xbox controller, now its been 3 months i never recharges it, in case i need to recharge i got universal charger that can be use for any mobile battery
@commanderofficial6903
@commanderofficial6903 7 лет назад
hey man,how can i charge an old laptop lithium ion battery which has a voltage of 3.1v when i took it out.(i know normally they have 3.7v)
@Alkaris
@Alkaris 9 лет назад
I'm curious to know about what would be best for using for a self-generating battery bank, that can charge from itself using copper coils and magnets and stores all that energy into Gel Cell Battery battery bank.
@chimichangascroll
@chimichangascroll 9 лет назад
Please, tell me you're not Trying "zero point" energy...
@Alkaris
@Alkaris 9 лет назад
All I'm really looking at is having a self-generating electricity and having a battery bank to store all that energy efficiently which can output a lot of power to power things.
@chimichangascroll
@chimichangascroll 9 лет назад
Well... high rate of charge and discharge but short time of storage --> capacitors / super capacitors; medium rate of charge and high of discharge and long time of storage but a bit da dangerous (LiPo), low rate of charge and medium of discharge with medium time of storage but with long life span (NiMh), medium rate of charge and high of discharge with long lifespan but expensive (LiFePo4) and so...
@Alkaris
@Alkaris 9 лет назад
Which would be safest to use?
@chimichangascroll
@chimichangascroll 9 лет назад
NiMh and LiFePo4
@alecw7063
@alecw7063 9 лет назад
What kind of battery does a gopro use? Planning on buying a spare
@772CODEMASTER
@772CODEMASTER 9 лет назад
A&V Productions Look it up, I think most go pros use a NiMh batteries, but you have to look at the specs on the page.
@MrCaliforniaD
@MrCaliforniaD 5 лет назад
How did you measure the peak current of 1.1A?
Далее
He turned a baseball into a stylish shoe😱
00:59
Просмотров 867 тыс.
I Built a SECRET McDonald’s In My Room!
36:00
Просмотров 18 млн
How to choose a battery for ham radio
8:27
Просмотров 12 тыс.
What's the Difference Between Paint and Coatings?
14:23
Class D Amplifier Tutorial!
8:29
Просмотров 735 тыс.
Basic Electricity - Resistance and Ohm's law
9:10
Просмотров 2,6 млн
Making another pickproof lock (but better)
15:14
Просмотров 2,8 млн
What is a schottky diode?
6:02
Просмотров 2,2 млн
The Most Confusing Part of the Power Grid
22:07
Просмотров 1,2 млн
Gizli Apple Watch Özelliği😱
0:14
Просмотров 4,6 млн