Advertising. 🔥►►Help the channel - donate: www.donationalerts.com/r/tati... 🔥 ►► Series 9 - a cycle about the Stove-Pipe. Assembly of a new prototype tube furnace. Lightweight section-base for the burner. Heat sink caps have been added to move hot flue gases closer to the outer walls of the furnace. Based on the principles typical for bell-type furnaces, the efficiency of the fuel combustion zone has been increased. In bell-type furnaces, non-combustible carbon dioxide and water vapor are returned from the hot gas bell to the combustion zone, with the formation of combustible carbon monoxide and combustible water gas. The stove is a pipe made of aluminum beer and tin cans. The development of DIY camping stoves continues! 😊 🔥 ► All my films about the stove-chimney: • Печка-труба своими руками 🪓► All our trips together: • Совместные путешествия...
📖 Content:
00:00 Folded tent stove.
00:13 Stove sections made from aluminum soda cans.
00:25 Flue gas redirection hoods.
00:37 Paraffin burner with a wick.
00:52 The first heating section of the stove.
01:07 The stove is completely disassembled.
01:13 Base section and first heating section.
01:41 Connectors for furnace sections.
01:44 Upper cover-partition.
01:47 Candle-burner stand.
01:57 There is fuel in the burner tank for several nights.
02:02 Heat sinks.
02:22 Plastic deflector.
02:48 When disassembled, the stove takes up more space.
03:24 All elements of the stove are close.
03:37 Candle-burner tool.
03:48 Strengthening of the upper edge of the burner.
04:04 The burner is close to the wick side.
04:17 Assembling the stove.
04:21 We insert the heat sink caps into the heating sections.
04:54 We connect the furnace sections.
05:16 Connecting sections with special connectors.
06:07 We continue to connect the furnace sections.
07:12 Upper connecting partitions.
07:54 Option with additional heat sink caps.
09:47 Option with additional heat sinks
11:49 Base section and burner stand.
12:04 Candle burner with fuel.
12:12 Approximate length of burner candle.
12:18 Installing the candle in the base section.
12:48 Installing the deflector on the chimney.
13:09 The height of the stove relative to a seated person.
13:42 Method of folding oven sections.
14:19 Using the stove in a tent at low temperatures.
14:39 The temperature inside and outside the tent at night.
14:50 Night frost.
14:56 Temperature outside and inside the tent in the morning.
15:13 Subscription reminder.
15:30 Wishes for the exchange of experience in the comments.
15:58 End of the movie.
20 июн 2024