🔥 How to SMOOTH PLADUR Wall with L'OUTIL PARFAIT Tools 🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻
• 🔥 Cómo ALISAR Pared de...
In this video you will see a simple way to finish off the plasterboard against a window, when you make a coating with omegas.
🔴 Book a personalized consultation with me at: www.tutorialcre...
🔵 Guide to help you analyze the budget: www.tutorialcre...
Tools we usually use:
- One level: amzn.to/3BgU8cD
- Laser level: amzn.to/3rGZqK2
- Laser level: amzn.to/3rGUQeD
- A pen: amzn.to/3rmnLVu
- One meter: amzn.to/3etCB7h
- A cutter: amzn.to/2VS7xrb
- A pencil: amzn.to/3zbzI2P
- A drill: amzn.to/36IMtFJ
- 5 Bit: amzn.to/3eRsU2P
- A screwdriver: amzn.to/3exW4nm
👉 RU-vid channel: L'outil Parfait / @outilparfait1920
This video is sponsored by L´OUTIL PARFAIT. In it you will be able to see how to tape PLADUR walls and ceilings with its system.
In this case I will show you the joint taping kit, which is a briefcase made up of:
- A corner roller
- A corner palette
- One 80mm roller
- A 10cm spatula
- A 180mm roller
- A 30cm spatula
- An adjustable spatula support.
- Two extendable poles.
👉 You can learn more about this kit here: www.outilparfait.com
Video transcript.
Very good!
Today we are going to see how to make this auction.
Subscribe!
If you are going to do some PLADUR work, and you are going to choose to hire a company that does it, I have created a brief guide to help you analyze the budget and avoid common deceptions in the sector.
Go to tutorialcreativ... to download it.
I leave the link in the description.
Ohhh.
This is the joint taping kit.
Throughout the video I will tell you a little more about the tools.
Thanks to L'outil Parfait for sponsoring this video and giving me the opportunity to learn about this work system.
For this system it is recommended to use cube paste.
We stir it well with a drill so that it takes on a good texture and grips well with the rolling pin.
First of all we will use the 80 mm roller.
We have the extensible sticks, which will facilitate a more comfortable work.
This click system gives us a greater firmness of the roller's fastening to the extendable pole, for a better job.
For the placement of the tape we will use the 10 cm spatula,
which has a flexible and strong blade to be able to tighten the tape well. It has a hooking system where we can put the position that best suits us.
We put a little paste on the spatula to be able to hold the tape.
We make force so that the tape is well tightened.
We remove the excess paste that remains on the sides.
For the screws I prefer to use the 30cm spatula, because with the 10cm there are always scratches on the sides and with the 30cm it is a simple pass.
This is the roller for the corners, which as we can see is the smallest and is a little different.
It is important that there is always plenty of paste, that there are no dry areas. Make sure you roll well over everything.
To tighten the tape we have the corner trowel, which is very flexible and adapts perfectly to the corner of the wall and also hooks with the click system.
We press so that it adapts to the corner and slide.
You always have to apply pressure so that the palette conforms to the corner and then slide.
Now we will use the 180mm roller to put paste in the joints.
If you liked this video, don't forget to click LIKE and share it with your friends.
Do you want to know every time I upload a new video of crafts, tricks, decoration ideas, inventions and some other interesting and fun things? So don't forget to subscribe to my channel :-D
27 авг 2024
