Hi friends!
This time Huawei P20 Pro. P30 is 99% the same process 👍
My equipment:
◉Glass cutting wire: bit.ly/3GiwqkH
◉Heat plate (glass separator): bit.ly/3hNAe47
◉UV Lamp: bit.ly/3GiVLLw
◉Glass cutting machine: bit.ly/3PTnTaU
◉Glue remover: bit.ly/3Vid6YZ
◉Small autoclave (bubble remover): bit.ly/3hX7WUC
◉Big autoclave: bit.ly/3GdQTHj
◉360° Separator: bit.ly/3Gr6409
Tips:
1. Heat the phone to 80°C (You can use hair dryer)
2. Take off the back glass, screws and battery (use isopropanol or PCC15 spray)
3. Take off the screen and cut the glass (use molybdenum wire)
4. Glue new glass to the screen - better use LOCA that don't need UV lamp (link below)
5. Glue home button with E-8000 or B-7000 glue and glue the screen to the frame
6. Use clamps to make sure it will be waterproof (left for MINIMUM 2 hours!)
7. Take cold cola and enjoy You work
➥Our service official website: jerrymobile.pl
Join my page👍
/ jerrymobilepl
Subscribe for more videos 😎
Comment if You have a questions 😊
Thank You💜
28 июл 2019