Basically you get strong fishing line a blow dryer do what he did goo gone the screen alcohol clean to perfection that’s all that lite is there for you could use a black light too the green is just brighter and the machine he puts it in is just a fancy dryer if you don’t have the money for a screen for east replace you ob don’t need that just let it dry naturally then glue the sides down and wellah but it looks time staking to me but it’s best to try for fifteen bucks befor spending two Hundo lol
I’m just a mom and started repairing my kids phones and iPads because I can’t afford new stuff and buy broken and because they break sh** a lot. If you have the right tools anyone can learn to do it. Not saying I haven’t hit challenges where I have had to pull my husband in on it to solder something for me because of water or an error on my part. Lol
11:49 El primero que veo que tiene tanta dedicación en retirar las partículas, excelente, he visto algunos que ponen el vidrio encima de la pantalla cuando aun tienen particulas y sucios en pantalla. Excelente y muy limpio su trabajo, felicitaciones.
I need like written steps. What are you wiping the digitizer with? Also is there another layer of glass on the digitizer? Because normally on the older ones I wouldn’t be able to just be scrolling on it without messing it up
Guess I am totally out of luck if I got no tools like that to fix mine glass only WOW, min=ght be best to order the Digitizer kit you made this look way too easy, no heat gun and slithers at a time wow
@@smiks23 jak dotyku się nie uszkodzi to działa. Ale zdarza się że po oddzieleniu szkła przestaje działać rysik częściowo i trzeba zmieniać również dotyk.
The pulsing in the video is like the camera is constantly seeking better focus (Panasonic?). Maybe better if you switch to manual focus for videos where you have fixed camera and subject positions -just a suggestion.
then laminator also has vacuum system like autoclave? i understand autoclave is vacuum with heating. if laminator also has vacuum system why they can't remove bubbles? becuz vacuum power has lower than autoclave?
Laminator generates vacuum inside. Autoclave generates big pressure inside, up to 8 bar. That's the difference 😉 autoclave needs compressor to work. Laminator needs vacuum pump to work. But my machine has built in vacuum pump.
@@JerryMobilePL oh shit...now i understood .laminator is vacuum and autoclave is pressure. i tot autoclave is also vacuum. now I solved the question!! big thanks bro!!!!!!!!!!
Super kanał i jeszcze te remixy When mom isn't home :D Zastanawiam się nad zaryzykowaniem i próbą wymiany szybki z moim Mix 2S w domu, bez drogiego sprzętu (klej, linka molibdenowa, alkohol izopropylowy i cierpliwość). Jest ktoś oglądający ten kanał (lub autor) w stanie doradzić na co najlepiej będzie kleić? Klej UV, normalna płytka OCA, czy może jakiś inny płynny klej w stylu E8000 się nada?
@@JerryMobilePL no całe szczęście ze nie jestem w gorącej wodzie kąpany i nie próbowałem takich rzeczy, ale oglądaniu godzinami różnych poradników do tego wróciłem na ten kanał i znalazłem to czego szukałem na początku na przykładzie samsungow A40/50/70, więc jeszcze raz wielkie dzięki :) zastanawiam się jeszcze czy te plastry OCB czegoś potrzebują do wiązania (tak jak klej w płynie np 2500f potrzebuje UV - co zresztą jest dość praktyczne). Rozglądam się za tymi płytkami bo obecnie na Allegro nie da się dorwać 2500F nigdzie w dwucyfrowej cenie za dawkę na jedno użycie 😵 i zostałby mi tylko 1000N a to jednak podobno do mniejszych ekranów.
It is possible BUT if any gets into the backlight it’s game over and I have tried and tried before I got my lamination machine and it always finds a way in plus it never fully cures and you will find liquid seeps into the backlight even if you remove it all in all it’s a nightmare!! Loca can be used on oled but it’s always better to use what was originally used and just use oca
@@JerryMobilePL if we just dont remove the sensor and put them in the laminator, wil it be high chance that the sensor be broken? Because as I see, when removing the sensor, there is some part very hard to remove (black spots left behind caused by strong glue), that is also damaging the sensor cable, right?
Laminator is for laminating (pressing together lcd and glass), autoclave is for bubble removing. Without laminating it's impossible to remove bubbles. 70% of screen will be air
if laminator is used only for pressing lcd and glass, why don't you just press it gently with your fingers or big book? you know, laminator is expensive. Do you need to pay that much only for pressing machine?
The head in the laminator is also heated to soften the OCA. Vacuum inside the chamber is supposed to remove majority of the bubbles, longer you leave it, the less amount of bubbles you get, it only to a certain time point, and there's no extra benefit. Debubbler will get out the smaller bubbles.