Be more careful when removing the usb C port board and always always remove the sim tray first. To be a technician you are very clumsy, you have to treat phones with sweetness, with delicacy.
1. Please how can I get an original 1:1 screen replacement for Poco F3? Kindly help with link if possible. 2. I feel it’s just my front glass that needs replacement, can that be done as opposed to getting a whole new screen? Thanks
I think it better for you to explain what are you doing instead you just play a background music IF you really want to teach us. But if you dont want to teach us, this video is good to watch.
I understand You. But 13 minutes is too long to talk about temperature, wire thickness and lamination pressure 😁 If You have any question please tell me, I will answer soon 😉
One question, I have a little f2, with the screen broken, when I connect the charger the charging led lights up, but if I press the power button it does not charge or anything, it is normal, if I change the screen it will start or will be another problem ? thanks
You need to pull the back off, had this problem on 1 of two poco f2 pros. The connector at the bottom where the speaker is, that's the root cause of the problem. You need a piece of thin plastic like a sim card cut in a small piece about as big as the ribbon connector itself. Solved my issue now the phone charges. But still needing a digi and screen as well as two back glasses.
@@Kraxt0n Did you do that repairment and it always work? I have to put pressure to charge mine just on top of where ends the main flex that crosses the battery. I see it's very common with F2 pro, what kind of adhesive did you use to secure the back? I'm thinking about change the flex or the charging module idk
@@Superchoco25ESP i cant recall "the repair" but i did however put a small piece of plastic inside to hold pressure there and never had the issue again (until my girl busted both mine and her devices) mi 11 now lol but your issue should be solvable if i recall as what this vid is about by doing what they do. the ribbon cable was at fault with mine.
@@Kraxt0n Yes, many people are solving the issue by putting something to hold pressure at the bottom end of the ribbon cable. Were your phone only charge when putting "manually" some pressure at the same point but over the screen (before "the repair" lol)
@@Superchoco25ESP I think your asking if applying pressure there made mine charge? If so, kinda...not always but sometimes it worked. Sometimes it did not. Thus why I heated up the back and fixed the issue the best way I knew how.
السلام عليكم ورحمة الله وبركاته👋🏻 انا اسم هاتفي (Poco xiaomi F2 pro) اشتريتو من من الانترنت قبل ٩ أشهر، فجأة الجوال ما بقى يشحن عم احطو في الشحن ما عم يصير وكان فيه ٥٢% شحن وبعد يومان طفى الجوال صرت احطو من جديد في الشحن بيطلع بس إشارة البطارة انو طافي وبعدها ما بقى يطلع شي قفل، بعدين بعد فترة حطيتو في الشحن صار يطلع بس ضوء احمر من عند الكاميرا وصوت، سألت على محلات كثيرة في السويد قالوا لي هذا فكينه غيرنا الشاشة و البطارة و مكان الشحن ما عم يشتغل وكمان قطع ثانية غيروها ما صار أبدا ياريت اعرف شو الحل الجوال الان جنب وطافي كامل ما بيشتغل وجديد والله اشتريتو بس ليش صار هيك ما اعرف اتمنى عمو تخبرني شو اساوي شو المشكلة يلي فيه اتمنى احد يرد علي شكرا🙏🏻🙏🏻🤲🏻🤲🏻 😪😪
Hi, My fingerprint doesn't work.. i can add my fingerprint but cannot open the phone with it. Screen is working and it's tactile but it won't open my phone
Hi i tried like you to connect the screen, it's not switching on. Nothing appear. Do you have an idea please ? I see the red led blinking or fix so it is loading. But the screen doesn't work. Do you think it's the screen or something else i have broken in the phone ? Thanks
Hi 😁 problem can be the connector on the motherboard. One line dead and it wouldn't work. Try second lcd, if will be the same need to service motherboard..
@@JerryMobilePL thank you. Strange screen switched on !!! But the buttons don't really work, now i see the screen as if it was off ( with time) buttons doesn't switch it on but i see time. i have a little bit of rubber i don't know where it goes !!
Hi i opened my phone again because it stopped charging. I think it's because it had been hot and the chatterton moved. Now the vibration doesn't work, it only make a scratch sound. Do you know what to do please ?
@@chokac1 thank you, eveything is so fragile inside, it doesn't charge again... i am waitinfg for a new flex cable but the last one was a copy and very bad quality... And i broke my screen again...
@@JerryMobilePL thanks for your answer. Finally it asked me to delete everything, so i did it. But still the pb. So i choose to reinstall everything. Now the phone is working. The fingerprint sensor is not working though. I tried to calibrate but the black part is not working. 1515 brightness instable last line : KB calibration test failed. I read pple did thing with twrp but i think i don't have it and i don't have an opened bootloader. I also already brick a mi max so i am not doint it since. I thing there are roms for chinese and other for westerns. My poco f2 pro is chinese with custom rom i guess. It was already made when i bought it and i don't want to install a rom or things that would break it. Edit : i have no sound when i make a call but loudspeaker is ok. Do you have an idea please ?!
