🔴 RODECaster Pro II Live Walkthrough Q&A!

Подписаться 150 тыс.

Просмотров 130 тыс.

50% 1

The RODECaster Pro II will be officially released next week, so in the meantime I thought it’d be fun to use it for a livestream where I can answer as many questions about it as possible and explore it in real-time with you.
*I am using beta firmware in this stream, so while the audio quality is what you can expect, some of the visuals/interface might be different when the official firmware is released.
• RODECaster Pro II:
bhpho.to/3wCwaqI (B&H)
geni.us/rodeca... (Amazon)
📼 RODECaster Pro II Videos:
• Initial Walkthrough: • RODECaster Pro II Init...
• Computer Features: • RODECaster Pro II Comp...
-----------------------
Affiliate links mean I earn a commission from qualifying purchases. This helps support my channel at no additional cost to you.
----------- CONNECT -----------
🎯 Subscribe! bit.ly/TEPsub
Instagram & Twitter: @sodarntom
Main Site: himynameistom.com
My Podcasts: himynameistom....
---------- SUPPORT THE CHANNEL ----------
Patreon: / tombuck
Become a Channel Member: geni.us/joinch...
----------- MUSIC -----------
•Artlist.io (2 Extra Months Free): geni.us/Artlis...
•Epidemic Sound (30 Day Free Trial): share.epidemics...
----------- VIDEO GEAR -----------
•Ecamm Live for Streaming: geni.us/ecammtom
•Sony a7SIII: bhpho.to/3f8mMlS (B&H)
•Sony FX3: bhpho.to/3EJuBde (B&H)
•Sony a7IV: bhpho.to/33mOGZo (B&H)
•Sony 24 1.4 (Main Lens): geni.us/sony24 (Amazon)
•Sirui Anamorphic Lens: bhpho.to/309H0rV (B&H)
•Zeiss 85 1.8: geni.us/zeissb... (Amazon)
•ATEM Mini Video Switcher: bhpho.to/2RVGI42 (B&H)
•Elgato CamLink 4K: geni.us/vddHN (Amazon)
•GoPro Hero 10: geni.us/gopro10 (Amazon)
•YoloBox for Mobile Streams: bhpho.to/3pc8qHU (B&H)
----------- AUDIO GEAR -----------
•Rodecaster Pro (for podcasts): bhpho.to/3q5kl...)
•Shure SM7B: geni.us/tepsm7b (Amazon)
•Rode PodMic: geni.us/EHeTTM (Amazon)
•Sennheiser MKH 50: geni.us/mkh50 (Sweetwater)
•Rode VideoMic NTG: amzn.to/2ZKrHTh (Amazon)
•Rode NT1 Condenser: geni.us/fRIqw (Amazon)
•Rode Boom Arm: geni.us/shr0 (Amazon)
•Rode Wireless Go: geni.us/LvzUSM (Amazon)
•Earthworks Icon: bhpho.to/3vkZEYZ (B&H)
•Shure MV7 USB/XLR Mic: geni.us/shuremv (Amazon)
•Shure Super 55 Mic: geni.us/ulcA (Amazon)
•FetHead Signal Booster: geni.us/dNus7 (Amazon)
•Blue XLR Cable: geni.us/bluexlr (Amazon)
---------- LIGHTS & SUPPORTS ----------
•Nanlite Forza 200 (Key Light): geni.us/9Ofr (Amazon)
•Aputure Light Dome Mini: geni.us/vf5O (B&H)
•Small Nanlite RGB Tube Lights: geni.us/nanlite (Amazon)
•Big Nanlite RGB Tube Lights: geni.us/pavotubes (Amazon)
•Falconeyes Flexible LED Light: geni.us/j4ENw (Amazon)
•Aputure MC RGB Light: geni.us/IuE4 (Amazon)
•Impact C-Stand: geni.us/k97w66m (Amazon)
•Big Tripod: bhpho.to/3lRoTyz (B&h)
•Small Tripod: geni.us/oQOh3Az (Amazon)
•Motorized Slider: bhpho.to/3ztKMJA (B&H)
•Overhead Camera Rig: geni.us/grpT (Amazon)
•GlideGear Prompter: bhpho.to/3tWcFb6 (B&H)
-----------------------
🎥 Check out the rest of my gear here:himynameistom....
-----------------------
- Who Am I? -
Hi! My name is Tom Buck. As a lifelong A/V nerd, I’m here to help you level up the audio and video quality of your streams, podcasts, puns, and videos. I was a high school Digital Media teacher for 11 years, and I started this channel in 2017 as a project to share my enthusiasm for digital media and teaching others while having fun along the way.
New videos are uploaded every Thursday morning, and more often when possible!
✴ Read my Ethics Statement about objective reviews, sponsored content, and brand partnerships:
himynameistom....
#Rode #RodecasterPro #podcasting

Опубликовано:

6 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 203

@travisminneapolis 2 года назад

#1 feature missing is just a Parametric Equalizer where we can go in and notch out bad frequencies.

@madness8556 5 месяцев назад

I've been getting well acquainted with a Rodecaster Pro 2 for producing a weakly community radio show and I'm largely very impressed by the unit and its user friendly work flow. Its easy computer integration is outstanding but I'm wanting to be able to actually produce ou radio shows with a nice relaxed live feel without ever having to switch on a computer. This is where Rode could continue improving things and here's my wish list if anyone from Rode reads this 1) Allow much easier adjustment of trim start and end points, fade in and outs as well as basic copy and paste and normalising in the waveform window for the smart pads and waveform window with the same easily accessible editing features for audio tracks stored on an SD card or USB flash drive in the unit itself. Currently it's an absolute PITA to easily trim and fade clips for the smart pads, despite online tutorials from Rode making it look easy! It's NOT easy for those of us to with fat fingers! Rode please fix this. 2) Improve the touch keyboard for naming smart pads and shows by allowing caps lock to remain on for those of us with bad eyesight who like to use CAPITAL LETTERS for naming things. Whilst your at it, please allow us to rename our recorded files on the SD card or USB flash drive without requiring a computer to do so. 3) Built in adjustable normalisation for those who want to create a master file for broadcast. In my case, the station requires that the master file is named in their preferred fashion and normalised to - 3db. 3) Allowing non Rode usb mics to be added such as my much loved Blue Yeti. Thanks for your excellent video guys. Keep up the work!

@HeresMo 2 года назад

Using it as a music device can you record a track and then listen and record the track back to add things like ad libs.

@ShaneBauer7877 2 года назад

Hey Tom....I started a small production company in Ga and I've learned so much from you guys...thank you keep it up

@tombuck 2 года назад

Thanks Shane, I really appreciate the kind words! Best of luck to you and your company!

@robynrox 5 месяцев назад

Thanks! I made it to the end. I think the main takeaway is that blue microphone cables go dodgy over time. :)

@tombuck 5 месяцев назад

Thanks for sticking through! Rode recently released their own colorful XLR cables that work quite well, so I've switched to those for pretty much everything.

@mrbelle8760 2 года назад

FINALLY a common every day type of guy giving a review that doesn't sound like they are trying to impress the manufacturer! Love all of your video's! You need to include your wife in all videos she's GREAT at keeping you on task. Keep up the great work.

@tombuck 2 года назад

THANK YOU! It really means a lot to hear this. I'm definitely a fan of Rode, but I'm glad that the genuine enthusiasm for such a fun thing was able to shine through!

@Zdravko100 2 года назад

I made it to the end, Tom! 😀 It was fun hanging with you both. Thank you!

@tombuck 2 года назад

Thanks for spending the time with us!

@DocFUNKist 2 года назад

I received my RCP II yesterday and I can confirm the stereo audio has been marginally improved... one thing you have to do though is to disable any processing to get the best sound quality... not forgetting (and most importantly) to disable THE MASTER PROCESS... I know most would miss that. Mic and other input audio processing can remain if anyone wish to have these process included on specific channel... Two things however are still unclear... 1- I've noticed connecting iPhone to record the sound coming out of the RCP II seems to result on a poor quality sound (Using USB-C Type 2 as per instructed) I am not sure if I'm doing anything wrong or I need their specific Rode Cable (currently just using original iPhone USB-C to Lightning) 2- The Multitrack on the computer are very confusing as you get all the channels with numbers (not as per the way they were customised on the device... Eg... Chanel 1...2..3 etc) Other than this, I have to admit they nailed it... a dream device with multiple functionalities.

@HeresMo 2 года назад

I’ve always used a ground loop isolator to reduce sound from the front headphones out in the old g rodecaster when recording to Atem or (add device here) although the back connectors would have been better they are usually used for our guests and hosts

@tombuck 2 года назад

That's a smart idea 👍

@dragonheatbeats9944 Год назад

Y’all are awesome to watch together.. much respect to you both..!!!

@DocFUNKist 2 года назад

How's the Stereo audio quality on this new device, the V-1 was not great considering it killed all the dynamics and sounded very muffled (stereo audio / music) using its average average pre-amps. Could you kindly compare both by sending the same signal to both? this is vital for radio shows and music streamers.

@tombuck 2 года назад

It's safe to say that everything has been leveled up and improved in every way.

@DocFUNKist 2 года назад

@@tombuck Can't wait to receive mine Thursday (in the UK) This would really be the last piece of my chain... finger crossed the sound great. Thanks

@radioprobromania 2 года назад

Same problem with version 1. Audio not good, kill low freqvency…..maybe this version had a good sound 🙏 PS: Doc, let me know if sound good after you recive it. Thanks 🙏

@DocFUNKist 2 года назад

@@radioprobromania i have… and I tested it extensively including recording… while it has been improved… it’s nowhere near standard. Cheap Mackie at around 100 will get you far better sound and dynamics… so disappointing at this price range… go figure

@radioprobromania 2 года назад

@@DocFUNKist But does it kill the sound as well? I want to use it for online radio, but I don't know if it's better than the Tascam Mixcast 4 I have now. Tascam has a very good sound, but it lacks an eq on the microphone. So, how is the quality of music on RCP2?

@TheHumanPalindrome 2 года назад

Thank you so much. I really appreciate how much thought you put into these walkthrough videos.

@tombuck 2 года назад

Thanks Mark! I really appreciate that.

@fluffffs 2 года назад

I’m a bit disappointed missing you live, but I really appreciate the video. You are a great team!

@tombuck 2 года назад

Thanks so much Micke!

@ricardomilice2470 2 года назад

Can you demonstrate a music recording and play back on this podcast. I wanted to use this for dj /music recording.

@valuemastery 2 года назад

I got my Rodecaster Pro II a few days ago, and I'm going crazy. One use case for me is using it in live online meetings. Mic and Headphones are connected to the RC, which in turn is connected to the computer with USB. Now I'm hearing my own voice all the time in headphones and can find no option to change this. I want to hear the other people, and I want them to hear me, but I don't want to hear myself.

@tombuck 2 года назад

Hearing yourself is pretty standard in in mixers like this, but if yo udon't like it and your headphones are connected to output 1, you can press the green Listen button on channels that you DO want to hear and then you'll only hear those (but it won't affect what goes out to the final mix).

@valuemastery 2 года назад

@@tombuck Thanks Tom, this is super helpful. Hadn't that figured out yet!

@derekhorsburgh6238 2 года назад

Hi Tom & Heather, the price in Canada is $929.00 +13% tax = $1,049.77 plus, possible shipping

@tombuck 2 года назад

It’s 929 before tax? Wow!

@derekhorsburgh6238 2 года назад

@@tombuck Yes, insane ah

@Yellowjacket1977 2 года назад

That bass run sounded like the theme from Peter Gunn (1:37:10). You gotta learn the Barney Miller Theme song. EVERY bass player learns that one!! haha, love your videos! I voice track an FM radio show from home and am about to buy the Rodecaster Pro 2 because of your recommendation!!

@tombuck 2 года назад

I’m so glad to hear it! And I’ll definitely add the Barney Miller theme to my list 😁 I was working on learning a Motown song this morning and now my fingers are dead.

@SondelaConsulting 2 года назад

I have found a fundamental flaw in the rodecaster II . My Wifi Pasword has This CHARACTER in it ^ (above the 6 key) the rodecaster does not seem to have that, which essentially means I cannot connect it wirelessly. and Also for a new device it only connects at 2.4HGZ and not 5 GHZ which most modern Routers use these days.

@tombuck 2 года назад

Oof, that's frustrating. Probably not the answer you want, but I'm sure they'll address that in a firmware update pretty quickly (it has to be a simple fix, right?). I think we've gotten 3 firmware updates in the past week, so they seem to be pretty on top of things.

@DizzyDocc369 Год назад

I’ll 100% play a TOYP&J cover with ya if u ever wanna live or or something that would be dope

@Mike1104USAA 2 года назад

Fantastic video! Thanks for doing this. I’m considering purchasing one to use for work because we do Team calls all the time. I also game and have always wanted better audio when gaming. I have the Rode Pod mic already.

@tombuck 2 года назад

I used my original RCP for work during the first 1+ year of the pandemic and it really made things nice, and then when work was over I already had everything I needed ready for videos and streams.

@goodfornothing89 2 года назад

Thanks Tom, I have a question regarding the SmartPads, is it possible to map and customize a SmartPad to play-back and instantly review a recorded session… instead of digging deep through the menus? I mainly use the Rodecaster pro II to record vocals and instruments.

@tombuck 2 года назад

This is a great question. I'm honestly not 100% sure, but Rode did release a video this morning where they talked about updates that are coming soon, including a specific big feature update for music.

@goodfornothing89 2 года назад

Hopefully the new updates have an answer, we as creators never stop asking for more… 👍

@funknflow 2 года назад

The RCPII now desperately needs custom mixes that can be assigned to the headphone outputs. With the removal of the TRRS jack, there's literally no way to get an analog mix minus out of this board. I've been talking with their customer support to plead my case so that it can be added in a firmware update.

@mp999 2 года назад

Hi Tom and Heather - another awesome podcast. Looking forward to getting our ProCaster 2 in a few days. What cable would you recommend I use to connect RCP1 output to appear on a channel in RCP2? We are planning on running live commentary from a sports match on RCP2 while we hook up live to reporters using the RCP1, so that we can patch them through once we have got them "on the line" and ready to go. The thought behind this of course is that we don't interfere with the live commentary by gathering all the media together on RCP1 and then patching them through onto one of the inputs on RCP2 for the commentators to go "round the grounds" to input reporters into the programmes. I hope I've described that so you understand. Your help would be so appreciated as always. Cheers, The mp team

@tombuck 2 года назад

Thanks for the kind words! There's no "official" method to connect two RCP's, but you can run a line either from the monitor outputs or a headphone output into one of the XLR inputs. IF you're using the RCP1, I would just get a 1/4" cable and run it from one of the headphone outputs into one of the combo inputs. The monitor outputs might give a cleaner signal, in which case you could use a "y" cable that has two 1/4" plugs on one end and a single one on the other.

@mp999 2 года назад

@@tombuck Many thanks Tom - always appreciate your time in answering as many queries as possible!

@officeofdemonology 2 года назад

I ordered mine on Wednesday from B&H and got it next day

@tombuck 2 года назад

Nice! Love B&H 👍

@MyTerryw 2 года назад

Great content covered so much stuff. When you get time I would like to see how to use multitrack in Audition, especially if playback is better than it currently is with version 1 of the rodecaster. I'm using Windows so there could be a difference, but changing audio setup to hear recorded vocal track when using USB as an input is a bit of a workflow blocker.

@omniart5714 2 года назад

That mixer is amazing

@snipitz Год назад

Is there a way to reduce the level of mic monitoring heard in the headphones without reducing the total headphone volume?

@king1ny 11 месяцев назад

hi tom im not sure i think i met you at your dads house when he had a plumbing problem in the basement in long island,ny.i was watching you tube and your video popped up.cheers. gary.

@tombuck 11 месяцев назад

Well, I live in California and my dad passed away several years ago, so I don't think that was me. It must've been some other dashingly handsome dude 😁

@king1ny 11 месяцев назад

@@tombuck oh sorry to hear. i'll because it was a guy and his wife from California and they set up a podcast RU-vid setup in the house in baldwin long island i think. thanks take care.

@heyguyslolGAMING 2 года назад

Did they add relay muting for the monitor outputs? I have the RP1 which did not have that feature so every time I power down the unit I get the pre-amp pop sound sent to my cans, which for those who don't know this can damage and/or destroy your cans and if you use hifi audiophile cans, then yeah you can see the concern.

@SheilaSWard 2 года назад

Greetings, you two are so good, thank you! I am a solo singer songwriter and I loved my RodeCaster pro for my Whispers podcast, but I want more, and this new RCP II which I have pre-ordered and looking forward to have in my studio sounds as though it will take care of all my studio work. Question: Can the smart pads be programmed to harmonize your own voice, or make your voice sound as though you have chorus or choirs, as in a voice harmonizing pedal? Thank you, sheila

@tombuck 2 года назад

Hey Sheila! Currently there aren't any harmonizing options for the SMART Pads, but seeing how Rode really seems to be pushing the music-related features of this, it wouldn't surprised me to see some pretty cool updates in the future. That's all speculation on my part, but I'm excited about it.

@omarmhs90 2 года назад

I have a question to RCP2 owners, when you power down the unit does the LCD remain on with Rode logo on it ?

@tombuck 2 года назад

There's a short shutdown period of about 10-20 seconds where the logo is on screen, but after that it should be totally dark.

@omarmhs90 2 года назад

@@tombuck which firmware are you currently running Tom ?

@randalripley8381 2 года назад

Probably a dumb question but here we go. Bought the RCP2. Simultaneously starting to hate "in face" and "boomed" microphones. I just lack mic discipline when getting animated. Could I use something like the Deity pocket wireless as my primary mic in the RCP2 while reaping the benefits of "set it and forget it" mic discipline/placement?

@tombuck 2 года назад

Not a dumb question at all! In fact, I'm working on a video all about lav mics right now. You can definitely use them with either RCP. The only downside is keeping track of batteries and making sure they're charged. I've also really been loving my Sennheiser MKH50 as an out of frame mic. Some less expensive alternatives to that would be the Rode NTG5 or Videomic NTG.

@kjell-olavaaser3368 6 месяцев назад

I have the rodecaster pro. When I run the iPhone 11 thru the bluetooth channel I just get mono. What do I do wrong?

@anwarkamal2392 5 месяцев назад

Can you show how to connect 4 channel wireless audio system

@CenasCorner Год назад

I disagree with the transfer speed. Now this could be because I need a faster card as I am using the one out of my RCP1. but trying to export an hour podcast as a wav file is taking forever! I waited an hour and it was not even half done. I restarted it a couple times and same result. I changed it to MP3 it has been 45 min and it just hit past the halfway point. I like to export in WAV because it is the raw uncompressed file and then I edit it. The final result will be MP3 as that is what my podcast host will convert it to which will add compression I do not want. At this point my RCP1 was faster. Again it could be I need a faster micro sd which I will be getting.

@bedroomkaraoke 2 года назад

i wish you could also do "phone-in" questions/comments in your live broadcast...using RCP II. :)

@tombuck 2 года назад

It’s absolutely possible!

@BigElad 2 года назад

Thanks to both of you! Had to step away from the live. With Ecamm, is there a way to get the audio from interview mode into one of the channels for the RCP? I do a livestream video town hall show that I publish as a podcast later, so I'm thinking both for livestream and for recording purposes. Thanks!

@tombuck 2 года назад

You can select any of the RCP USB options as an Ecamm output 👍

@mattconstance2196 2 года назад

Great Vid yet again Tom. Enjoy Flight Sim after the stream. 2am was a bit late/early but glad you are keeping this one up.

@tombuck 2 года назад

Flight Sim is so much fun 😎

@AljonGo 2 года назад

Love this Tom and Heather! Great show. As a musician/guitarist/podcaster, I did voice my concerns and possible improvements to Rode a while back. I have a Rodeccaster Pro and love it, but found that having some of these improvements now in the Pro II is exactly what I need. Hopefully down the "road" I will be able to upgrade to it! Thanks again for the great content.

@tombuck 2 года назад

I'm really glad to hear that you sent them feedback. They really do listen! I'm super excited to see where they take the music capabilities of the new RCP 👍

@mariusmocanrealestatephoto1378 Год назад

Love your tutorials. Your videos helped me setup the original Podcaster + Atem Mini Pro and now I have an issue setting up Procaster Pro II + Atem Mini Pro II. Can't figuring out how to adjust the monitor volume (red & white cable from Podcaster Pro II into Atem mic jack input).... Please help!

@johnnyrocco5168 Год назад

Is this a multitrack recorder? Can I record a song? Guitars, drum machines, synths? Is there enough storage space for a few songs?

@fconearthasinheaven Год назад

Thank you Tom! I really liked it, was absolutely useful and well explained. One question about video... With the Sony FX3, what kind of settings/lens do you use, and what kind of sd card do you have on it?

@tombuck Год назад

I used a 128gb V90 card (usually ProGrade but sometimes Sandisk). Otherwise, I don't do much. No picture profile and custom white balance, but that's about it. Then a bit of a preset in Final Cut Pro.

@fconearthasinheaven Год назад

@@tombuck thank you so much for your time

@reyscorpio4529 2 года назад

How do you connect a smartphone on RP2? Can you still use a 3.5mm TRRS cable? Btw Excellent videos on the RP2.

@tombuck 2 года назад

You can use either Bluetooth or usb 👍

@kenjohnson765 2 года назад

I want to stream backing tracks from one computer, Play Guitar and sing and send the mix to a second computer using obs.. Is that possible. is there mic effects for live use like this?

@tombuck 2 года назад

I haven't done that exact workflow, but I have played a lot of bass through the RCP2 and I don't see why this idea wouldn't work.

@SBULIVE Год назад

Hi Tom, Thank you both for this video. How did you get the Rode logo off of the mic arm?

@Trinode 2 года назад

The bluetooth device list (when searching - devices are in pairing mode, and discoverable) never populates and even when paired to a phone, going into the list still is empty - done an erase all settings and still that screen shows nothing (Firmware 1.0.1)

@tombuck 2 года назад

It's probably worth trying a reset. I just tested it on mine with Firmware 1.0.1 and everything worked normally 🤷🏻‍♂️

@jaludwick Год назад

Just bought RCP II, has original RCP. My apps: Rode Central ask to be connected to RCP, it is, won't recognize it. Also Rode connect shows pads with different sounds than the actual pads. Then there is the RCP app, probably from the old RCP, shows no info, assuming we don't need it. thinking just going back to the original RCP.

@tombuck Год назад

Rode apps are a mess, but if you have the most updated version of Rode Central, then it should show up. Might be worth reinstalling it from scratch.

@jaludwick Год назад

@@tombuck reinstalled twice No dice.

@user-dr4bl9lw6o Год назад

What camera do you use that I am watching you on your video youtube please?

@tombuck Год назад

My main camera is the Sony FX3 with 24 1.4 lens.

@chrisabboud3949 2 года назад

Can you pair Bluetooth headphones to the RCP2?

@tombuck 2 года назад

Yup!

@HeresMo 2 года назад

Rock and roll racing.

@AliSatchu 2 года назад

Hi Tom, So I have my microphone setup on channel 1 and usb1 chat cable connected to MacBook. Doing video calls works great but even though rode says mix minus is permanently added to rodecaster usb chat line the other side cannot hear anything I play on the computer. For eg. If I play a video or share my screen they can’t hear the audio as I do on my headphones. Please help!!!

@tombuck 2 года назад

If the computer is running through the RCP and the Chat channel is the main source for the computer, then mix minus will prevent users from hearing anything. The way around that is to use the Main channel for stuff that you DO want people to hear 👍

@terrenceholden 2 года назад

Beautiful studio. Love the wall colors. Do you have any sound treatment installed? I don't see sound panels or anything in there.

@tombuck 2 года назад

Thanks Terrence! I have a bit of sound treatment (but I should really do more). I have two 4' x 2' panels from Acoustimac that are awesome. One is directly in front of my and the other is mounted to the ceiling above me. Beyond that, the carpeting helps a lot too.

@terrenceholden 2 года назад

@@tombuck Okay, I asked because I think you sound pretty good despite you not having a lot of acoustic treatment. I haven't treated my home studio yet, but I do have a nice thick carpet under me. Maybe some light treatment will be good enough and I can gradually add more.

@Xobi9 2 года назад

Will the procaster 2 be able to cope with the senhieser 800s plugged straight into the headphone port?

@tombuck 2 года назад

They should be fine, especially since you have choose high sensitivity or low sensitivity headphones for each channel.

@AnimosityX Год назад

Right now I stream on 1 12 Gen PC, and I use VoiceMeter Patato now to route all my different audio like Music/ Discord / Game and I use StreamLabs OBS on a single PC setup. Will this finally be a HARDWARE version of VM & I can finally uninstall VM?????

@chromemosquito 2 года назад

does the new one run microphones that require ghost power like the audio technica at2020???

@tombuck 2 года назад

Yep, but pretty much any mixer or interface will be able to provide Phantom Power 👍

@OSDAudio 10 месяцев назад

such a vibrant colorful you tubers, may i ask what camera equipment used for recording? thanks.

@TisforTech 2 года назад

Have you had any issues with the RODE Central MacOS app and the Pro II? I’ve had a bunch of weird issues trying to get it into transfer mode - app just spins and doesn’t connect. Also issues when loading the sound pads - trying to replace sounds I already loaded. Seems like bugs in the app or firmware, etc…. General bugginess.

@tombuck 2 года назад

I haven't had issues on either of my Macs so far. The RCP2 shows up immediately and responds to commands/etc.

@seriouzfilmz9397 Год назад

What is the main mic for this video?

@tombuck Год назад

It's the Sennheiser MKH50 👍

@Home-Sweet-Home64 Год назад

Hey buddy. Nice information. Is there any big difference between a normal Yamaha usb mixer and Rodecaster?! The later one is way too expensive @Tom Buck

@tombuck Год назад

The biggest difference is what they're designed for. Most Yamaha mixers are terrific, but they're designed for music/instruments. The RCP is designed for spoken word so it has more built in gain/cleaner preamps.

@Home-Sweet-Home64 Год назад

@@tombuck thanks for letting me know. My purpose is to sing. Really appreciate your help

@DavidFosterVlog 2 года назад

Can you give me an affiliate link to that balanced 1/4" cable you're using?

@tombuck 2 года назад

Now that I look I'm having trouble finding the specific balanced Y cable I was thinking of. But here's a normal one that I've had for a while: geni.us/M0ldsGg I've gotten mixed results with it, but it's worth a try.

@Lourd.have.Mercy11 Год назад

Hi. Just started following you and your wife Heather. Thank you for info on media equipments. Wondering if this is a good to start with for someone who has no experience in podcast / dabbles in vlogging etc. I bought 2 other audio mixer but after watching your post thinking of returning both of them. i have to make a decision soon as my amazon return window is closing in. Also if i got rode ii i also have to get mics and cables. I have a you tube channel but havent done much with it. Related advise would be helpful...thanks in advance.

@tombuck Год назад

It's always tough to say for sure without knowing your exact workflow, but if you want the most features with plenty of room to grow, then the Rodecaster is the way to go. If you're just looking for a simple interface with maybe a few basic effects, then something like the Vocaster Two might be a good choice. I love the RCP, and if you've got the budget for it, it's outstanding.

@Lourd.have.Mercy11 Год назад

@@tombuck thank you. I have been debating whether i want to invest in the rodecaster ii. I have to admit its quite a gadget! Could see myself having fun with it. Lol

@Waz.E 2 года назад

Is there a way to get a consoles audio into the rodecaster pro 2?

@tombuck 2 года назад

I think there must be, but I'm too much of a noob to know how. I only recently got an Xbox Series S, so I need to experiment a bit.

@Waz.E 2 года назад

@@tombuck sounds fun. and thank you for the response.. if you happen to find out in your experiments please let me know. I will let you know also as I am experimenting too. thank you!

@campinvictus3325 Год назад

Love your content. Question: So I installed the new RCP 2. While I am able to hear the recorded audio from my mics, I am not getting my sound pads / smart pads audio getting through to the final recorded product. We contacted @rodemics and still no help. What are we doing wrong?

@mata4185 2 года назад

Hey Tom I see you using the rode podmic have an rode NT 1 but I find it picks up to much background noise when I'm presenting or in meetings for work is the rode podmic I good alternative is there others you'd recommend for a similar or slightly more cost thanks

@tombuck 2 года назад

In general, dynamic mics are a bit better at rejecting noise than condenser mics, but I haven't found them to be a magic bullet or anything. The absolute biggest difference is to sound treat your space as good as possible (not as exciting as a new mic, but really important).

@mata4185 2 года назад

@@tombuck Awesome thanks

@urbnctrl 2 года назад

I literally just bought my RCP1 when this came out ..

@tombuck 2 года назад

It's still an awesome tool! And if you bought it recently enough and really want the 2, you might be able to return or exchange it.

@urbnctrl 2 года назад

@@tombuck Thanks for this! I decided to first go with this one and maybe rent the 2 when it is out to see how much more of a benefit in versatility it might bring. So far the 1 seems like a very capable tool to deliver! Thank you for the amazing review again as always

@DroseMr Год назад

Will this replace Zoom V3 Vocal Process with 16 Studio Grade Effects, Up To 3-Part Harmony, Compression, Delay, Reverb , Pitch Correction,? THANK YOU

@candyartstv 2 года назад

What pop filter are you using with the rode procaster?

@tombuck 2 года назад

It’s from BSW and it’s called the “REPop320”

@chrisrod01 2 года назад

Haven't watch but when it comes to gaming streaming can this operate like a goxlr when regarding audio rerouting ? Like on the physical fadee can I put F1 game, f2 chat,f3 Spotify f4, f5 ECT ????

@chrisrod01 2 года назад

just watch half of it so that a yes to my question at least for 3 virtual fader on physical shader same as rode website states. Be nice if they add more in the future I guess im buying it then

@NonsenseCasual Год назад

Tom, i just picked up the RodeCaster 2. it is awesome! I appreciate your reviews. I have run into a snag. When i connect a device (IPAD pro) to either bluetooth or USB 2, i can't control the volume levels once i start recording. I am recording through audacity. Is there a setting perhaps, that you are aware of, then i am missing to allow this control?

@tombuck Год назад

It sounds like you might have the output setting switched to “pre fader”. Make sure it’s on “post fader” and you should be good to go 👍

@cayman2010 2 года назад

OMG. How did I miss the live? One day …. Hahahaha

@AnimosityX Год назад

Can you finally use this product as a interface to your DSLR and use your XLR for your DSLR?

@tombuck Год назад

You can run the line level outputs into your camera if needed. The Vocaster Two also has that as an option if you don't need the other RCP features.

@AnimosityX Год назад

@@tombuck Sounds like it’s still no way to get around audio going into cameras from down grading to cameras crap preamps. Sounds like that’s what you are saying we would still have to generic rig it to camera for it to work but the quality will still not be from the source?

@AnimosityX Год назад

Also, are you able to use your own VSTS within the PC2?

@pramodray2553 Год назад

Thanks buddy, it worked

@JosephCloupier 10 месяцев назад

how can i get one RODECaster pro 2.

@StarkSpark 2 года назад

Great video Tom! Is there a way to increase the audio gain out from the USB2 port?

@cayman2010 2 года назад

Can you import settings from RC1?

@tombuck 2 года назад

Not that I know of- they’re super different.

@Dabroski_ 2 года назад

I'm wondering why this Expensive RodeCaster Pro II doesn't have any kind of Music channel, Game Channel, and other digital audio channels similar to the GoXLR. I have a goXLR mini, but I would need that functionality prior to buying one. The one piece of revolutionary functionality RodeCaster Pro II has is the dual PC connectivity though. That would solve my Work PC connection. I plan on connecting this to 2 separate PC's so that only allows me 2 channels per PC. Kind of disappointing.

@Dabroski_ 2 года назад

Got to the part of the video where this is the most popular question. LOL

@tombuck 2 года назад

Ahh yes, the livestream isn't as condensed as a regular video. Rode made some pretty big updates to how mix minus works, and I did a separate video about that here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-vttwo5BNEFM.html I haven't used a GoXLR myself, but this update seems to cover A LOT of options.

@iamfrankstallone 2 года назад

Re-ordered on B&H through your link since the competitor still didn't have it in stock from my pre-oder. 💰 #affiliatemoneyforgreatcontent

@ezzel-bendary8762 2 года назад

Brilliant video👏I have a question…normally I connect my shure sm7b to a Dbx 286s and then I connect its output to my old zoom podtrak p4 so now I bought the Rode caster pro 2 so is it possible to connect them together?

@tombuck 2 года назад

It depends on what your goal is I think. If you're looking to use the P4 to add extra inputs, then you can still run the outputs of one into the inputs of the other. If you're using the DBX as a booster/processor, you won't need it anymore with the RCP2. As wonderful as it is, any booster will degrade the audio quality- next week's video will be all about this!

@ezzel-bendary8762 2 года назад

@@tombuck Thank you Tom for your reply as i am using it for Podcasting...can't wait to see the new video 😎

@CoffeeTalkandTechJohnRyan 2 года назад

Why would use your dbx286s now? All that processing can be done in the in the rodecaster? Plus like Tom said you now have more headroom on the gain.

@ezzel-bendary8762 2 года назад

@@CoffeeTalkandTechJohnRyan thank you for your reply…the idea was that I was thinking that with the hardware which is in that case the DBX286s I can have a better improvement and performance for podcasting than the pre-made settings of the podcaster 2.

@CoffeeTalkandTechJohnRyan 2 года назад

@@ezzel-bendary8762 you could still can do that if you like but that is to be determined if its better. All you do is feed your mic into 286 then out the the 1st 1/4 trs into your rodecaster mic output. Using a balanced 1/4 trs to xlr cable.

@StefanGenov7 Год назад

Hi Tom how do you switch between 2 mics when you use Rodecaster Pro 2 ?

@tombuck Год назад

It's super simple! You can either bring the channel faders up and down when needed, or just press the red mute button whenever you don't need a mic to be active 👍

@StefanGenov7 Год назад

@@tombuck Thanks!

@Coxtoasten12 2 года назад

Do you know the difference in shipping time of pre-order vs backorder? I'm hopeful near the end of june, but sadly probably July. Tom when are you coloring your hair purple, looks good on her. From a Minnesota Vikings fan.

@tombuck 2 года назад

I don't know backorder times unfortunately, but I definitely wouldn't hesitate to keep contacting the seller you used. And once my hair goes all white, then it'll be time to play with color 😁

@milonali7878 9 месяцев назад

Wow 👌 nice review

@bfat78 2 года назад

Can I transfer my smart pads from RCP1 to RCP2...or do I have to record them all over again

@tombuck 2 года назад

You can move the audio files (if they’re not on your computer, use the app to save them to your computer and then move the,to the new RCP).

@bfat78 2 года назад

@@tombuck ok thanks I'll try that..but it is going to be a headache to find all of those sound bytes again..lol

@theberardo 2 года назад

always enjoying your content man, got the RCP 2 - thanks for all the info. keep up the good work

@tombuck 2 года назад

Thank you Tony, I really appreciate that!

@theberardo 2 года назад

@@tombuck ;)

@BrewedCoffeeBean Год назад

tom is the man

@djplayerproductions Год назад

Nice Video. Very informative. Have you had this problem. Or maybe it not a problem that's why I'm asking . When I record in RCP2 . When I play it back I can hear the audio in the headphone in every headphone jack except for headphone jack 1. Can't figure that one out.. Is that normal or do I need to contact Rode

@tombuck Год назад

That sounds like a setting is switched around somewhere. Be sure that the headphone output for Headphones 1 is set to either high or low sensitivity (whichever you're using) and that might help. If that doesn't fix it, then I'm sure Rode's support team can help.

@djplayerproductions Год назад

@@tombuck Thanks

@SANDMANs-um7my 2 года назад

Can you using the new mixer, can you using that on Ps4, just asking

@tombuck 2 года назад

That's a great question and at the moment, I don't think so. I tried connected it to the USB port on my Xbox Series S and nothing happened, but I haven't been able to test it on a PS4. I'm also not the most knowledgeable person about consoles 😬

@nata.sasmita Год назад

HI Tom. I plan to upgrade my RCP1 to RCP2. My question, is it possible to use RCP2 combined with dbx 286s as voice processor? Have you ever tried and compared it with internal voice processor on RCP2? Which one is better? Many thanks for the answer.

@tombuck Год назад

I’ve never tried that combo, but I’m sure it’s possible if you really love your 286. That being said, the RCP2 is definitely designed to not need anything else connected to it. 👍

@nata.sasmita Год назад

@@tombuck Thanks for responding my question. One more question, are those mic channel can be configured to handle line level signal? So we can then add external equipments on it. Again, thanks for the response. 🙏

@tombuck Год назад

You can choose mic or line for each channel 👍

@nata.sasmita Год назад

@@tombuck Thank you for the confirmation, Tom. Very favorable. God bless you as always.

@fpet1 Год назад

Does anyone know if the headphone monitor (chanel 1) has any latency? If so is it useable? I'm used to the go xlr and concerned the latency will bother me

@tombuck Год назад

I've had no problems with latency on my RCP. I've heard some people say that they have, but I've never experienced it.

@KilleaTignisz 2 года назад

Great, super video, I'm really love it , thank you, my full supportt it's your's 👍🏻👌🔔🌲🌸5

@tombuck 2 года назад

Thanks so much Amelia! I really appreciate the kind words!

@Just_Samson 2 года назад

Colorful couple. 😉

@humanoit7533 2 года назад

Love your videos man ❤️ keep it up

@tombuck 2 года назад

Thank yo use much! I really appreciate the kind words. 🙏

@humanoit7533 2 года назад

@@tombuck any suggestions for my channel?

@paulk1187 11 месяцев назад

can you use the RCP2 in a live venue

@tombuck 11 месяцев назад

Sure! The monitor and line level outputs are quite decent.

@paulk1187 11 месяцев назад

Thank you for your reply back Tom, I'm wondering if you have or will be doing a video of your set-up to include all of the equipment you're using currently? Also maybe how this could be done in a hybrid format, I help with hosting hybrid meetings, so having a live venue incorporated with the zoom platform.

@SistonaCeciliaPingal 11 месяцев назад

Good am host replay here I played anoyjer video and I woke up its ended here anyway I already connect you nice video

@tombuck 11 месяцев назад

Haha, well good morning!

@Odyseuss08 Год назад

Rodecaster or Mackie? hmmmm

@tombuck Год назад

I've had the DLZ Creator since its launch but I just can't quite wrap my head around it. It's definitely an AWESOME tool, but the learning curve is much steeper than any of the Rodecasters.

@4_the_health_of_it 2 года назад

I spilled tea on my desk, some probably got into my RCP I and have had some issue with it. So, yes this forced me to upgrade. Oops, I spilled something - to my wife.

@tombuck 2 года назад

Ahh dang, what unfortunate luck! 😇

@kxunscripted7552 2 года назад

Well Tom I guess that's it for the Rodecast Pro 1, no more videos on it or workflows... we who still have the first are the new step kids!! Sucks ! I'll just wait until the new shinny toy get old.

@tombuck 2 года назад

There’s a playlist on my channel of 20+ videos from the past 3 years that’s not going anywhere 👍

@eirik1068 2 года назад

Right now this product is useless for livestreaming any content. As you are unable to route audio where you want via faders or software like the goxlr can. Its absolutely shocking that they(Røde) advertised live streaming/gaming for this product as it is now. While I don't doubt it will be fixed in future software updates, right now it does not work ad advertised. Shame indeed.