Watch Next 😎👇 🥰 How to Use Layers in Silhouette Studio ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-GrV6L2azPHA.html 🔥 Introduction to Point Editing in Silhouette Studio ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-K7EZQibOmK4.html 🌈 How to Use Advanced Color Settings in Silhouette Studio ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-7BIskAQajQE.html
I can't believe that I learned something new apart from this technique ! In the Send panel, selecting the parts to cut or not cut ! That was a pain for me to get things cut or sketched the way I wanted to ! You are truly a Silhouette Fairy ! Merci !
I haven’t had any luck using my foil quill. Just tore up my foil or had all the lines from the fill settings all through it. Like I used the swirls to infill and it’s all you can see is heaps of fine lines like a fingerprint. My force was in super low too. Definitely didn’t turn out even 1/4 as good as your beautiful card
Omg i love you... i like your Voice and the way you speak. I dont unterstand all because i'm Swiss But i 'm glad to say : you are the first Streamer. Who i dont think after 2 Minutes. Please shut up and say just Importen think i must know... you're realy amazing...
Hi Becky I couldn’t find the video link that you mentioned in your video regarding the filling in of fonts. Can you point me in the right direction please. Warm Regards J
Hey, no worries, I love questions! I haven't seen the Freestyle pen in person, will it fit in your pen holder? That might be a good answer for you. Hope this helps! ---Becky
Hi help pla. The tip seems to not reach the foil its not creating those line marks thus my foil not printing on the cardstock I have a cameo 4 I used the regular tip
Hey there! Thanks for your kind words, I'm so glad you are enjoying the videos! The foil does come in red and it is beautiful! Hope this helps! ---Becky
🎁 Sparkle and impress with Alpha DTF Print's UV DTF Christmas magic! What's your favorite thing about incorporating DIY elements into your holiday decor? @AlphaDTFPrint
Hey, great question! No, the foil is very, very delicate. You don't want this anywhere near transfer tape. However! There is a foil process you can use for textiles and it's fabulous. I'll link it for you here. ---Becky ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-eeRETIBlH4g.html
Thanks! You're video was very clear on how to do this. I was curious on what Foil Quill was. Now I definitely will try it. Where can I get the bundle of sayings you used?
Just what ive been looking to do, your videos are absolutely informative and just to the point, thank you. Where can i get the quilling tool from and what is it called. Can i just use the heat foil like i would to laser print then laminate? Thanks
Hey Tahra! You can purchase the Foil Quill from Amazon or locally in most major craft stores (I know JoAnn Fabric carries them). I don't believe you can use the same DecoFoil like you would with a laser printer, I have heard that there is something different about this type of foil for it to work with the Foil Quill. Hope this helps! ---Becky
Hi! I just found your video for the first time and no its older so im not sure if youll respond, but have you ever used the foil quill on glossy paper? I'm trying to add foil to a dust jacket but am scared it won't adhear to the glossy texture. Thanks!
Hi Andi! We have never tried this ourselves so I can't say for certain. I also tried to do some research but it seems like there is no answer for that. I also feel that it might not stick but it would need a little test for sure. - Agata
Hello and thank you for all your videos. I have learned 99% of what I know from you and the other one from the silhouette offered videos! I just got the foil quill set for my birthday and I'm super excited to dive in! I got the magnetic mat too but Cameo 4 isn't listed on it only 3.. could this just be that it's older and the 4 wasn't out yet and it will still work for me? please say yes lol here's hoping!
Hey Krystal! Yes! I don't believe the Cameo 4 was out yet when the Foil Quill released, or maybe it was just too new to be included in the Foil Quill instructions. Hope this helps! ---Becky
Hey Monica! I haven't used the foil quill for portraits yet, but it makes me think you would need the fine tip for detail work. Hope this helps! ---Becky
Hey Maria! Our apologies for the delay in response and we hope you've found the answer but if you are still having any troubles, please feel free to write in to mail@designbundles.net or join us in a live chat so we can help with your next project! - Dawn 🙂
Our apologies for the delay in response and we hope you've found the answer but if you are still having any troubles, please feel free to write in to mail@designbundles.net or join us in a live chat so we can help with your next project! - Brittany
I recently emailed Silhouette asking about the Foil Quill since there was no USB port, but hadn't heard back from them at all, which was/is disappointing. So I greatly appreciate your posting this video. I'm also glad I purchased the charger when I bought the Quill. Can you use the metal plate with the magnets with the Silhouette 4? I could have sworn it was shown being used when I purchased the Foil Quill and the metal plate/mat. I'm so close to have my crafting area reorganized and cleaned up where I can actually get the Silhouette 4 (still using the 2nd generation Silhouette) out of the box, after about a year, and start using it. Another question is if you can't use the quill in the 2nd slot and leave the blade in the first slot. If not, what is the purpose of having 2 slots? The Silhouette I use now only has 1 slot and I thought I needed 2 slots for the Quill. Thank you in advance for any answers you can give me.
Hey Cindy, I'll be honest, I tried this when working on the video. It didn't work for me but I didn't have a chance yet to research why. I know that Carriage 2 is intended for the new Rotary blade, Kraft blade etc. but don't know if that has any bearing on it, I haven't used Carriage 2 yet. BUT I have a video coming up on all the blades for the Cameo 4, so I will try to address this in that video. Hope this helps! ---Becky
@@DesignBundles Thank you! Looking forward to the upcoming video on all the blades for the Cameo 4...some of them are so hard to find (never available) in the Silhouette store.
Can I use this bundle to create my card in design space and use cricut foil tool? I do have the silhouette studio business edition. Thank you for your tutorial.
Hey Beth! Yes! Absolutely! You will follow a mix of this tutorial and our tutorial on the Cricut Foil Tool. I'll link it here in case you haven't seen it yet. I also have a Cricut Foil Quill tutorial coming, but it's not quite ready yet. Hope this helps! ---Becky ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-c-DiGmvENtg.html
Hey Toni, I'll be honest, I tried this when working on the video. It didn't work for me but I didn't have a chance yet to research why. I know that Carriage 2 is intended for the new Rotary blade, Kraft blade etc. but don't know if that has any bearing on it, I haven't used Carriage 2 yet. BUT I have a video coming up on all the blades for the Cameo 4, so I will try to address this in that video. Hope this helps! ---Becky
@@DesignBundles I should have read all the comments before asking questions. I think this answers why you used the same slots/Carriage 1 instead of using both.
@@DesignBundles I have done a little research on this with using carriage 2. I have used it once to cut some chip board. From what I understand it's intended for those blades because it has more pressure. The force goes beyond 33 and that's why it's used with the more heavy duty tools and were stuck swapping attachments between the first one all the time. I'm hoping in the future Silhouette can take this into consideration when designing :) hope this helps.
I did Kier, but you do have to make sure you are using a design that is set up for sketch pens (single line designs like this one work great). Regular designs will only draw where the machine would normally cut. Hope this helps! ---Becky
I broke my tip first try ;_; I followed your tutorial, but the adapter D combined with the pressure of the sketch option didnt mix well and it basically tried to engrave the design (even though i was gentle, and set up half the pressure to try...) into the card boar, i had literal scratches in the paper. Now no amount of pressure will reach the foil, i am so sad... Y_Y
Hi Ms Becky, thanks for the video! Might I ask, is the paper thickness matters? I've been struggling to transfer the design into the paper, it almost as if the tip of the foilquill only gracing the paper. The result is thin and uneven. I even tried the max force level and no improvement there. I'm using 135gsm card stock, adaptor D, medium tip quill, action "sketch", and "pen" as tools (I cant seem to see the "pen holder" tools, maybe we're using different version of the silhouette studio? Mine is 4.4 basic 🤔) I'm scratching my head in frustration. The issue is not on the foil, it transfers perfectly when I do it manually. It really looks like the quill tip simply does not reach the paper enough... any advise on how to mitigate this?
@fanny yes as a matter of fact I did kinda solve it by changing the mat (from standard silhouette mat) into Cricut’s thicker ones. Layering the media also helps, anything that raised the paper thickness really…
Hi I have a question, let say you have a hundred of cards to produce a day, which tools is better in terms of cost and durability, minc laminator or quill foil? Thanks in advance :)
Hey Helena, as long as you have a laser printer, I would use the laminator method (doesn't have to be Minc brand). It would be a million times faster for sure. The foil quill takes a long time to fill in images unless you are just using single line designs. Hope this helps! ---Becky
Hey Beth! I sure do not but you are the second person to request. I have definitely added this to my list for future videos! Thanks for the great suggestion! ---Becky
