[0001] Xtool x100 pro 2 - Nissan Frontier

Подписаться 13 тыс.

Просмотров 43 тыс.

50% 1

In this video, I am using the Xtool x100pro2. I had cut a new key for a Nissan Frontier 2018 and didn't follow the basic rule of program all keys. So I had 2 original keys the would operate everything except starting after the program and this is correcting the problem to have 3 functional keys. If this helps or you liked it, please hit those like and sub buttons.
JenkinsLocks.com

Опубликовано:

5 авг 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 34

@kenabi 3 года назад

the two different codes apply to two year ranges, where the bcm pin converts via encryption to either, but only one code will work with either the old or new immo systems. which is why it just generates both. old = 2003-2009, new = 2009+. it doesn't generate new pin codes every time. if it does, there's something screwy.

@mrdman094081 3 года назад

can this tool do the nissan 20 digit pin ?

@jonathancervantes5080 9 месяцев назад

I have a autel 508 also needing to program ignition key for a 12 frontier is it the same procedure or is it different immo scanner I have to use for trans keys

@JenkinsLocks 9 месяцев назад

I've never had an autel, but from my experience, all nissans with the NI04T key tend to be the same...when you start to program, all keys are erased and you must program all keys (existing and new) at the same time. The procedure is pretty much identical between my xtool prodpad 3 and my topdon pro.

@erikaditya4896 3 года назад

Does it works with juke?

@JenkinsLocks 3 года назад

Nissan Juke? Yes.

@erikaditya4896 3 года назад

@@JenkinsLocks thanks, appreciate it

@chulkpower 2 года назад

No it doesn't work to juke , xtrail or qashqai I try it.

@chulkpower 2 года назад

Dosen't support nissan xtrail and qashqai

@JenkinsLocks 2 года назад

I don't think the xtrail was sold in the US and the qashqai is branded as rogue sport in the US. I don't have this scanner anymore so I can't check, but you may have to select a different region.

@vinaimaharaj4769 2 года назад

I believe its pronounced as Stool

@petemartinez318 3 года назад

Can it actually reset miles?

@MisdaadKanaal2K22 3 года назад

Yes, but it depends on the car model

@JenkinsLocks 3 года назад

Like Met said, it depends on the vehicle. I will try to do a video this weekend on the procedure.

@MisdaadKanaal2K22 3 года назад

For wich car do you need it ? Or type of brands

@shaungilmartin1505 9 месяцев назад

chucked it in the bin

@JenkinsLocks 9 месяцев назад

No disagreement from me. This was the programmer I could afford starting out, but quickly outgrew it.

@Flyinghawaiian1977 7 месяцев назад

I have the Xtool X100 Pro3(it looks the exact same as the Pro3) I can program the keys but the red immobilizer key icon stays on. Any idea why?

@JenkinsLocks 7 месяцев назад

It stays on after the is programmed, and you start the vehicle?

@Flyinghawaiian1977 7 месяцев назад

@@JenkinsLocks yes it will drive even. After 2-3 starts it needs to be reprogrammed.

@JenkinsLocks 7 месяцев назад

@Flyinghawaiian1977 that wouldnt be a problem with the programmer. I'd try a different key or if you've done that, check the ignition cylinder and security module...start simple with checking the wiring/connectors. Check for loose connections like grounds.

@Flyinghawaiian1977 7 месяцев назад

@@JenkinsLocks ok I will do that. Thanks for getting back to me so quickly.