0062 A Pentium Overdrive exposed issues with my 486 motherboard

Подписаться 68 тыс.

Просмотров 47 тыс.

50% 1

On today's SMMC, we have a Pentium Overdrive CPU (For the 486) that when tested revealed some issues with my 486 test bench! We also have a Floptical drive that I test out.
-- Video Links
Compaq Presario 425 Series:
Part 1: • PC archeology: Compaq ...
Part 2: • PC archeology: Upgradi...
Part 3: • Compaq Presario 425 fo...
The retro web:
theretroweb.com/
Adrian's Digital Basement Merch store:
my-store-c82bd2-2.creator-spr...
Support the channel on Patreon:
/ adriansdigitalbasement
Adrian's Digital Basement (Main Channel)
/ @adriansdigitalbasement
-- Tools
Deoxit D5:
amzn.to/2VvOKy1
store.caig.com/s.nl/it.A/id.16...
O-Ring Pick Set: (I use these to lift chips off boards)
amzn.to/3a9x54J
Elenco Electronics LP-560 Logic Probe:
amzn.to/2VrT5lW
Hakko FR301 Desoldering Iron:
amzn.to/2ye6xC0
Rigol DS1054Z Four Channel Oscilloscope:
www.rigolna.com/products/digi...
Head Worn Magnifying Goggles / Dual Lens Flip-In Head Magnifier:
amzn.to/3adRbuy
TL866II Plus Chip Tester and EPROM programmer: (The MiniPro)
amzn.to/2wG4tlP
www.aliexpress.com/item/33000...
TS100 Soldering Iron:
amzn.to/2K36dJ5
www.ebay.com/itm/TS100-65W-MI...
EEVBlog 121GW Multimeter:
www.eevblog.com/product/121gw/
DSLogic Basic Logic Analyzer:
amzn.to/2RDSDQw
www.ebay.com/itm/USB-Logic-DS...
Magnetic Screw Holder:
amzn.to/3b8LOhG
www.harborfreight.com/4-inch-...
Universal ZIP sockets: (clones, used on my ZIF-64 test machine)
www.ebay.com/itm/14-16-18-20-...
RetroTink 2X Upconverter: (to hook up something like a C64 to HDMI)
www.retrotink.com/
Plato (Clone) Side Cutters: (order five)
www.ebay.com/itm/1-2-5-10PCS-...
Heat Sinks:
www.aliexpress.com/item/32537...
Little squeezy bottles: (available elsewhere too)
amzn.to/3b8LOOI
--- Links
My GitHub repository:
github.com/misterblack1?tab=r...
Commodore Computer Club / Vancouver, WA - Portland, OR - PDX Commodore Users Group
www.commodorecomputerclub.com/
--- Instructional videos
My video on damage-free chip removal:
• How to remove chips wi...
--- Music
Intro music and other tracks by:
Nathan Divino
@itsnathandivino

Наука

Опубликовано:

30 май 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 229

@GrahamTinkers Год назад

Hi Adrian, when you looked the board up on the website, the image showed it with an AMI BIOS, maybe changing the BIOS might give you more control over the cache.

@angieandretti Год назад

I was gonna say the same thing. AMI BIOS vs Mr BIOS.

@ruthlessadmin Год назад

As someone else mentioned, they made a 63Mhz PODP5. I had one and OCed it to 83 with no problem. Got it at a garage sale in the mid 90s for $1 - best upgrade of my life!

@awilliams1701 Год назад

I remember the early days of SATA drives. Hybrid power was VERY common. Not many people had SATA power PSU's. so they did molex for a while to help bridge the gap. I remember getting all excited when I bought my first SATA only drive that no longer had molex.

@GeoffSeeley Год назад

Indeed. I had a local IBM office give me a bunch of SATA drives to test before they were commercially available to the public and they were Molex power and SATA interface only. I remember I had some issue and they had an IBM engineer phone me directly(!) and he was able to fix the issue in software. You won't get this kind of service today 😞

@awilliams1701 Год назад

@@GeoffSeeley oh that's interesting. I've never seen any molex only. All the ones I saw were hybrid power. The only exclusives I've ever seen are SATA exclusives.

@tenminutetokyo2643 Год назад

No more 4-pin Molex on DVD-ROM drives which are impossible to unplug. Thunderbolt is even better - all power, control,, and data on one small USC-C cable.

@awilliams1701 Год назад

@@tenminutetokyo2643 I've never head of a thunderbolt DVD drive. But the interesting thing is there was a delay in getting SATA DVD drives. By the time they came out they were SATA power only.

@morantaylor Год назад

There were also Western digital SATA hard drives with dual power inputs.

@erinwiebe7026 Год назад

@Adrian: After recently restoring my own DX2-66 PC, I suspected your speed600 results were quite low, so I ran both it and cache check on my 486 to find out. My PC is a 5V AMD DX-2 66 with 256kb of L2 cache. The board is a PCChips M601 - also a VLB board. In cache check, my setup scores 16 microseconds from 1-8, and 26 microseconds from 16-256. In speed600, the CPU score is 317.11 Mhz and FPU is 488.00 Mhz. So from what I can tell, even your 486 DX-2 66 should be performing much better than it is.

@michaelallen1432 11 месяцев назад

I remember pc chips. Weren't they the company that did the fake cache chips?

@MrStevetmq 11 месяцев назад

There are many more variables. Chip sets and other things play a big part.

@mpettengill1981 Год назад

You're right about the overdrive having some kind of protection if the fan isn't running. I had a similar situation happen to me with a Pentium overdrive, where processor was running super slow for no apparent reason. I pulled the cover off the computer and noticed that the fan was not turning. Once the fan was reconnected and spinning properly all was back to normal.

@jdmcs Год назад

I have a 486 motherboard with the Contaq 82C495A chipset (a Lion Computers Local ISA 486 that also has a "Made in USA" sticker on it), and I took a look at the Pentium Overdrive during a livestream. Both L1 and L2 caches were functioning with the Intel processors I tried (I went back and verified what cache check told me), however, my board only works in write through mode even though this is supposedly Contaq's write-back cache chipset. In fact, reviewing the spreadsheet of my benchmark results of several processors and L2 cache sizes reveal the following for Landmark Speed Test: 486DX2 66MHz, 64K L2 cache: CPU 276, FPU 476 Pentium Overdrive 83MHz, 64K or 256K L2 cache: CPU 508, FPU 1039 Am5x86 133MHz, 64K L2 cache: CPU 381, FPU 636 Am5x86 OC'ed to 160MHz, 64K L2 cache: CPU 501, FPU 840 I only tested the increased L2 cache on the POD processor. And yes, it appears as if my motherboard has an issue with the Am5x86 processor (which it wasn't designed to use but I am using it via one of those PNY upgrades that I got on eBay for relatively cheap). Looking at the CPU scores, it looks like the processor may be running at 3x multiplier even though I jumpered the upgrade for 4x... or maybe was the L1 cache disabled much like you saw with your POD??? Luckily I livestreamed the process and can go back and review the cache check results. Source (Time stamp is Landmark Speed Test with POD 83MHz with 64K L2 cache): ru-vid.comIFo-8dhvSxc?feature=share&t=5063

@RetroTinkerer Год назад

Hello, I just noticed from an Adrian tweet about this issue, ge is getting less than 8MB/s on the main memory when testing with cachechk utility, how much are you getting?

@KomradeMikhail Год назад

Pentium technically had separate Instruction and Data caches within it's L1 cache, rather than the Unified L1 that i486 ran... This might require a later BIOS or chipset that specifically recognises the difference. It also couldn't hurt to pull the L2 mobo cache chips temorarily just to test results on L1.

@ironhead2008 Год назад

I'm betting this is more of a chipset issue. Chipset incompatibilities combined with price helped kill POD sales. One of AMDs 5x86 chips just made more sense as an upgrade. You could hunt down a regular AMI/Award Bios for the chipset (ideally one post POD release) and see if that helps.

@TR19 Год назад

I love your channel, I have never been into computer repair or building but these are very interesting, I could watch all day.

@gonaeu Год назад

I have checked with Landmark System Speed 6.00 (speed600) and my DX2-66 result is: CPU: 316 MHz FPU: 453 MHZ

@MothKeeper 10 месяцев назад

YAWN YAWN...

@AureliusR 4 месяца назад

@@MothKeeperwtf is your problem?

@MothKeeper 4 месяца назад

🤣🤣🤣 toilet.@@AureliusR

@stevesether Год назад

I miss the days when you could just pop in a new chip, and get 2x 3x or 4x (or more!) performance from the original chip, same motherboard. It seemed like magic at the time. The Socket 7 went even further. 75mhz all the way to 400mhz with MMX and 3DNow. That was an incredible time to live through when you'd get these huge performance gains just a couple years later with a CPU upgrade.

@harisalic2568 Год назад

The Am4 socket is probably the closes we can get nowadays. Going from a R3 1200 to a R7 5800x3d is also a pretty big leap even if it's very unlikely that someone would go that path

@GGigabiteM Год назад

The original Socket 7 was from 75-200 MHz, with some late board being able to go up to 233 MHz. Super Socket 7 extended that up to 570 MHz, but not all boards supported all speeds. CPU clock speeds were advancing so fast that chipsets and motherboard vendors couldn't keep up. Earlier Super 7 boards are less likely to support the later faster AMD K6/2 or 3 chips. There were of course the janky upgrade solutions by 3rd parties, but they were never guaranteed to work 100%. This video shows just one of the problems you can encounter, but the other is the FSB. An upgrade like the Evergreen Spectra that has a AMD K6/2 400 runs the FSB at 66 MHz, rather than the native 100 MHz of the CPU, slowing it down considerably. The whole Socket 7 / Super 7 era was a minefield of compatibility nightmares, I don't look back on it fondly.

@GGigabiteM Год назад

@@harisalic2568 Just because both the R3 1200 and R7 5800X3D exist on the same socket, doesn't mean they will work on the same board. AM4 is a minefield of compatibility issues due to AMD promising too much from the AM4 platform. Socket longevity historically is not a good thing, and AM4 joins the ranks of Socket 7, Slot 1, PGA370 and LGA775 in terms of the number of compatibility headaches they all share. AMD had a lassiez-faire attitude when it came to motherboard firmware, and let vendors do whatever they wanted. This resulted in bloated graphically intense UEFI setup menus that used a considerable amount of ROM space on the limited 16M SPI ROM used on most motherboards. This came back to bite AMD in the ass by the time the Ryzen 3000 chips rolled around, their AGESA package that they supply to motherboard vendors that contains all of the microcode for their CPUs to work was getting too large to fit in those small 16M SPI ROMs with all of those fancy menus. In keeping with the lassiez-faire attitude they had, they still offered no real solutions and let board vendors do whatever they wanted to try and solve the problem. Board vendors then started either dropping support for older CPUs, or dropping support for random CPUs they deem not worthy of support. So this creates the problem for the buyer in that they can never know what AM4 motherboard they buy will support in terms of CPUs. So you can quite literally buy a brand new B550 or X570 board with an old firmware installed, that you have no control over, and it won't support the shiny new Ryzen 5000 series you bought. You'll either have to play the RMA lottery to get another board with hopefully a different firmware, or buy an older Ryzen CPU and hope that one is supported so you can flash your board to a more recent firmware release. I've literally had this happen four times with AM4 boards now, across four different chipsets. B350, x470, B550 and x570. In every case, the board shipped with a firmware that didn't support the CPU I was using, and I had to either RMA it, or find someone I could bum a CPU off of to get it reflashed. It doesn't help that the motherboard vendor claimed the CPUs I were trying to use were "officially supported", but not mentioning it required a specific firmware version.

@stevesether Год назад

@@GGigabiteM There's quite a few socket 7 motherboards that will fully support a K6-2 processor clocked at 400mhz. All it needs to support is 2.2V, and a 2x multiplier that the K6-2 interprets as 6x. I have one of them. Works great.

@GGigabiteM Год назад

@@stevesether The 6x to 2x multiplier remapping was purely a thing done by AMD, it wasn't widely supported, and could be hazardous to your motherboard, potentially leading to its death. Getting a working multiplier does not equate to a motherboard supporting the CPU. If the BIOS doesn't have the correct microcode for the CPU, it may have erratic behavior, or not work at all. The cache not working properly was a big issue. Another big issue was power regulation. Boards without explicit support for K6/2 CPUs usually didn't have voltage selection that went down to 2.2v, and even if they did, power regulation for CPUs at that time was primitive. Many motherboards still used linear power regulators, which burn the difference between the input and output voltage as heat. The larger the distance between those two numbers, the more heat is produced. The boards with buck regulation also often were poorly configured, leading the mosfet to operate in the linear region, essentially the same as a linear regulator in regards to waste heat. Before slapping a K6/2 400 in an old Socket 7 board, these factors need to be researched thoroughly, else you may end up with a damaged motherboard.

@christodd3361 Год назад

Adrian, MR BIOS was usually an aftermarket bios people used for compatibility issues. I'd bet anything the MR BIOS on that board is not the appropriate build for that exact board, even if it's "close enough" for the chipset. As another commenter mentioned, using an official AMI BIOS might solve your cache issue. The Pentium Overdrive fan slowdown was actually a touted feature at the time - think about it though - lots of 486 boards that these were put in didn't even know the concept of a fan or cpu temperature, and the Pentium absolutely ran too hot to run without a working fan. Intel had to come up with some way to save the processor if the fan got dirty / stuck / died - since the motherboard and BIOS absolutely wouldn't do a thing about it. The funny thing is there's a lot of overdrives out there floating around without the fan on it - and replacement fans are hard to find. This was likely the opposite of Intel's original intent: save the expensive chip and just replace the cheap fan. Nowadays if you have a fanless PODP83, good luck getting it to run at 83 due to the fan slowdown routine and the proprietary heatsink.

@KrzysztofC-1 Год назад

I agree, first thing I'd try would be AMI BIOS

@ionstorm66 Год назад

You can run any cheap NB/SB heat sink on them with a thermal adhesive strip.

@stevesether Год назад

Curious. What's the compatibility issue the MR BIOS was designed to solve? AMI was so ubiquitous back in that era, I'm surprised there were any issues at all.

@agurdel Год назад

"didn't even know the concept of a fan" Which is a interesting little detail. The fan is powered via the CPU pins since there is no header to plug any fan in. Explains what some of the additional pins are for.

@steeviebops Год назад

@@agurdel Yep, I had a DX2/66 at one stage which had a small fan and it was powered from a Molex connection on the PSU.

@idahofur Год назад

You guys remember the over drive ready boards with the extra Big Blue Socket with white letters on it? :)

@aCivilServant Год назад

There could be a number of factors at play when benchmarking the performance. The motherboard BIOS has a problem correctly recognising the POD-83 (possibly around L1 cache) causing the benchmarking software to give false results, or the BIOS is correct and the software is at fault. I noticed Speed Mark 6.0 was copyrighted 1993, the POD-83 was released two years later. Perhaps it's mis-reading the CPU (note in the screenshot at 41:50, speed Mark claims the CPU is an 80386DX!).

@RetroTinkerer Год назад

That could make some sense if people like Phils or VSwitchZero haven't already tested the POD83 on Landmark v6 and get different and better results (his DX2 66 scores were already almost half of what other get) the BIOS is disabling the L1 on all the CPUs

@nticompass Год назад

The drive with both SATA and Molex power connectors were made in the transitional period between IDE drives and SATA drives. They were for people who upgraded their systems with SATA ports, but still had old PSUs with only Molex connectors. Also, do not connect both the SATA and Molex power connectors at the same time.

@dagglock7615 Год назад

Yet another awesome video!!!

@Renville80 Год назад

That big sheet of foam may be handy for sorting all those loose ICs… now all we need to do is start scaring up a supply of IC tubes so they can be properly stored. The 4547 is a higher current version of the trusty 74LS47.

@lbrentevans Год назад

The spikes on the inside of the telecom connector are used for clipping onto single conductor wire through the jacket. Might come in handy somewhere for checking. Voltages where the terminations are difficult to access.

@Dr_Mario2007 Год назад

Pentium Overdrive CPU was a popular upgrade for the 486 computers especially to play Doom on it, as some games started to require a superscalar processor to run properly at decent framerate.

@xsc1000 Год назад

Doom was OK on 486. Did you mean Quake?

@Dr_Mario2007 Год назад

@@xsc1000 I agree, it just depends on how fast the 486 is running at - 66 to 133 MHz range for those ancient x86 processors were decent for this game as far as framerate go. At lower frequency, it's just a tad choppy. And Quake, yes, again, it also has to do with how fast the processors ran at, as GPUs weren't a thing just yet at that time, or if they were available, they were just very pricey (custom ASICs tend to be expensive).

@7agrobel Год назад

I noticed that at 41:50 min of the video, during one of the tests with speed600, the background color turned blue, instead of red, and the detected CPU indicated an Intel 80386DX, instead of the 486 that was detected before. I don't know if this could indicate some problem or influence during the test or if I missed some detail. I just hope I could have helped if possible.

@horusfalcon Год назад

Interesting video, and some very nice goodies.

@Midcon77 Год назад

Adrian - you were right about the Dot's pretzels - picked up a pack of the honey mustard and they are great!! :)

@erickvond6825 Год назад

This reminds me of the OptiFloppy and the Imation Superdisk being originally developed by Commodore for the Amiga. I can't remember who they partnered with but this also shares technology with the Iomega Zip disk. Of course by then they didn't need the optical track on the top of the disk. To answer your question though, yes that drive will in fact read and write regular 3-1/4" disks

@grabo454 Год назад

After I figured out that all I had to do to overclock my Packard Bell Legend 660a (486SX-25) to 50 MHZ was a jumper setting, holy crap, did Sim City 2000 run amazingly! Was stable for YEARS. Don't know what happened to that beloved piece of crap computer. So many good memories.

@richardwernst Год назад

Interesting, thanks. Suggestion, on your xt-ide flash card, create either dos menu or batch file(s) in root (or in path) to do the cd to change directories and type commands. Would save a lot of time for you and video as well as keystrokes.

@jeromethiel4323 Год назад

To make sure your boot floppies are always accessible, use a permanent magnet to attack them to a file cabinet. Easy peasy! ^-^

@ellenorbjornsdottir1166 11 месяцев назад

No!

@ghostemane85 Год назад

It was the Note 3... And I LOVED it!!!

@lancegentle6430 Год назад

That EasyIDE USB to PATA (and SATA with adapters) is the BEST adapter. I fall back to it when even newer USB to SATA adapters don't work. It just WORKS.

@chadhartsees Год назад

We had a 486DX2 66 with 16 megs of RAM (in 1993!) and it was a beast... until Wing Commander III and IV. The Pentium Overdrive 83mhz upgrade really made a big difference.

@little_fluffy_clouds 5 месяцев назад

Aha, yes, Wing Commander games were like the Crysis of their day. I remember the original Wing Commander was dog slow on anything but a beefy 386, which was too expensive for me at the time. As prices came down over the years, I was able to afford a second-hand 486 machine which finally allowed me to enjoy those games with a somewhat fluid framerate.

@button-puncher Год назад

IKEA CR2032 battery? LOL! That's my weird takeaway from this video. Floptical...WOW. I never knew that was a thing. And the precursor to the Iomega Zip dive. No kidding. Mind BLOWN. Thanks for another great video. Interested to see if you find another 486 mobo to test everything. I've got one but it's a spare for an old voicemail PC. Still working in 2023! :D

@dennisp.2147 Год назад

There were 63 and 83 mhz Pentium overdrive processors. EDIT: The 486 overdrive processor marked 33 mhz indicates what the processor was intended to upgrade. This marking scheme didn't last long

@ironhead2008 Год назад

Yeah, both had a hardwired 2.5 multi, but the first was intended as a replacement for a 25 mhz 486, the other was for a 33mhz 486.

@Retrohertz Год назад

That explains it then. I didn't know that.

@ironhead2008 Год назад

@@Retrohertz I bet the 63 mhz versions will work fine in a 33mhz board btw.

@dennisp.2147 Год назад

@@ironhead2008 Can confirm that they do.

@ironhead2008 Год назад

@@dennisp.2147 Figures, I doubt they would bother binning them that tightly, they were probably relying on the average end user not knowing better.

@nticompass Год назад

I can get Dot's pretzels where I live in Western NY. They were a big hit at a friend's party, everyone loved them! 😀

@thesillyhatday Год назад

I've had one of those EasyIDE connectors since 2006. I still use it to this day. The USB SATA adaptor would be nice to have, it never exsisted back then though!

@Ariannus Год назад

We have Dot's Pretzels here in Kentucky. They have a limited edition Cinnamon Sugar Pretzel currently that is incredible.

@JustinEmlay Год назад

Just about all early SATA drives had 12V molex for power because not everyone switched over yet. Needed both for the transition period.

@UpLateGeek Год назад

I haven't managed to find a reasonably priced source for the anti-static foam. I bought some cheap parts bins that weren't anti-static, and I had intended on lining the drawers with some thin anti-static foam, but I shelved the project when I found out how much a big sheet of the stuff costs. I really should look around and see if I can find a cheaper sauce than the silicon-based electronics supplier.

@ultrametric9317 Год назад

Actually that connector is a very good thing - it resists the bending that causes desoldering from the board. And it is a very secure and tight fit for the cable.

@williamsquires3070 Год назад

I see I’m not the only one who likes those pretzels! 😊

@paincreatesfame Год назад

3:20 can confirm, I’m also an Oregonian and those pretzels are THE BEST.

@ultrametric9317 Год назад

Well this is all fascinating. You should try all this on another period mobo, one that is a little more mainstream, say from a top-end IBM PS/Valuepoint 486. Those were good machines.

@GigAHerZ64 Год назад

Just a reminder. Pentium's FPU is not much faster than 486's. The difference comes from the ability to run FPU asynchronously/separately from the rest of the CPU in Pentium. It's almost like you would have 2 cores in pentium.

@troyquigg4411 Год назад

That pushed in pin means that the SCSI cable was connected backwards... I'd wager the card and/or drive had something fry because of that...

@mashrien Год назад

13:37 (nice) They did also make 180mhz MMX overdrive chips as well, but the higher speed ones just upgraded a non-mmx pentium board to an mmx at higher clocks.. So for example, a Pentium-90mhz-to-150mhz would go up to an MMX-180mhz, or a Pentium-75 up to an MMX-150mhz.. I BELIEVE they had socket5 versions as well, though the frequency jump wasn't near as high, but it still did have multi-media-extensions (mmx) on a 486/socket5 system, something that could dramatically improve performance in certain workloads. Though in other workloads, like those heavily dependent on the bus for example, would remain more-or-less the same in terms of performance as the CPU was still very much limited by the bus as well as ram throughput While they're novel for sure, it's just as easy (and oftentimes cheaper) to build a socket7 retro system nowadays for we retro enthusiasts, and by avoiding using an overdrive, you're not bottlenecking yourself via the bus. There's no advantage a socket3/socket5 has over an early socket7 board as far as retro usage, except for maybe VLB, but there ARE socket7/pentium(non-mmx) boards that still have VLB slot(s), however those are exceedingly rare and their price reflects the scarcity. (That's why the two I have will be buried with me lol) I DO have a massive collection of other hardware (20+ socket3/5/7 motherboards, cards, sound, video, controllers, cpus, ram, HDDs, actual fully functional CRT monitors, that I've been trying to sell to a good home- I want to make sure the stuff goes to someone that's going to love it and not just flip it to earn a quick buck.

@PrinsessePeach Год назад

You did one change that could have an effect on the cache situation. You disabled Maximize Ext-Mem (REMAP).

@PrinsessePeach Год назад

🤓

@JohnZombi88 Год назад

Dot's Pretzels are so good. The only flavors we have around here are regular, honey mustard, and cheese curls. I'm going to have to order some pork rinds. I bet those are amazing

@mrgatogrande4284 4 месяца назад

I would definitely try the P24T setting with the jumpers!

@slightlyevolved Год назад

We have Dots pretzels here in Illinois. Strangely enough, the almost 100% guaranteed location to get them is Ace Hardware stores. Some of the normal grocery stores have them too.

@BetaWolf00708 Год назад

I stil have the Galaxy S5 and original cable and agree that micro USB 3.0 port is annoying, but compatible with micro usb as well like most of the other phones in the galaxy line, just plug the micro USB cable into the wider portion of the jack on the phone/device.

@cacheman Год назад

46:45 I note that the board in the photo has AMIBIOS.

@ForgottenMachines 9 месяцев назад

0:28 Friends asked back in May on my Discord server..."AJ WHAT have you done to Adrian??!!!!" Ah, well...whatever it is, I love it!

@monsterpatch9074 Год назад

i had a 586 overclocked to 133Mhz. it ran cool also. Pretty straight forward. what about the overdrive.bat file?

@mattsword41 Год назад

remember a review of a floptical drive in amiga format in the early 90s - 20mb I think. Never saw one in real life :)

@shmehfleh3115 Год назад

I got an AST 486 DX2/66 lying around & ready for benchmarking, if that would help.

@rfmerrill Год назад

Isn't the reason for the extra pins the extra wide data bus you mentioned?

@stitchfinger7678 Год назад

I can confirm Dot's Pretzels were available in Michigan when i was there last, at mainstream stores.

@lexluthermiester Год назад

@Adrian's Digital Basement ][ In the BIOS, IIRC you need to disable the external cache on the board for the Pentium internal cache to work properly.

@granitepenguin Год назад

Dots are available in Chicago. Really good pretzels. :-)

@mattparker9726 Год назад

0:40 YEAH! I'd get behind adding a map into these mail call videos! That sounds cool! And if you digitalize it, then you could simply update it from software.

@BulkierFive921 Год назад

Honey Mustard Dot's pretzels are the best IMO. Try to always keep a bag around. They sell them here in Chicagoland, Illinois.

@ultrametric9317 Год назад

Word fun - "floptical" is an example of what is called a portmanteau.

@xheralt Год назад

I only discovered Dots Pretzels recently in Wisconsin, but they are thoroughly addictive!

@rednight2476 Год назад

I had one in my SGI Indy quite a long time ago now. I just used it as a normal floppy drive.

@communalnoodle1356 Год назад

The difference between the normal DX2/66 and the overdrive DX2/66 is the additional pin they have that is required in some motherboards with a soldered on CPU to disable the onboard CPU. There is two versions of them.

@hicknopunk Год назад

Galaxy S5 used that usb. I loved the connector.

@PatientXero607 9 месяцев назад

The POD83 is for Socket 3, while the DX2 and DX4 was for Socket 2. That's why you are seeing additional pins on the POD83.

@cambridgemart2075 Год назад

Those SK series chip appear to be equivalents to 74 series TTL chips, for example a 7447 is a BCD to 7 segment decoder, just like that 4547. Actually, I am wondering if the 4xxx means it's CMOS, so equivalent to a 74C47

@7agrobel Год назад

And at 50:30 min, about the faulty connector pin, on the Floptical drive, it is not mentioned if a continuity test was done, so this could be a possible cause of the failure, if that pin is used for something.

@twocvbloke Год назад

Certainly intriguing seeng that iomega Floptical drive, gven my recent obsession with LS-120 drives, they do have a very similar appearance and does make me wonder if an LS-120 disk could be compatible, most likely not, but would be interesting to see this drive working if somehow you got a floptical disk for it... :)

@richardestes6499 Год назад

Yeah, that hard drive connector is weird. Seagate uses them on their USB 3 drives as well, and I actually had to go out and buy a standalone cable of that type when I got my Brother ADS-1200 desktop scanner, as it also uses this interface and did not come with a cable in the box.

@mickaka Год назад

There are overdrive chips that go in the existing 486 CPU socket (ODPR) and overdrive chips intended for boards that had specific additional overdrive sockets (ODP). You read the part of the manual that refers to “Pentium overdrive processor socket” so I assume you have the latter, which should not be installed in the 486 CPU socket.

@evanwoliver Год назад

This difference was only an extra pin meant to disable a 486SX soldered to the board. They should both work fine in any motherboard without the soldered on CPU as far as I remember

@DavideCampagnaGiuseppe Год назад

For the micro USB3 connector the Samsung S5 had it and also the Note 3

@Ojref1 Год назад

A lot of mom and pop PC stores sold those A-Trend motherboards back in the day, IIRC they used Award BIOS mostly. Maybe a few used AMI.

@DouglasFish Год назад

USB3 -> Sata usually only ever worked for SSD's for me Also, funny enough... we have a production machine still running a 386.

@wskinnyodden Год назад

Even if the upgrade CPU is a DX instead of a specific 487 or overdrive you can get the system to disable the onboard SX CPU by grounding that extra pin (or is it 5v, better you double check hehe but it works, I will place bets that you can put a normal 486DX without the additional pin on any SX system by just wiring that pin correctly to signal the onboard CPU to go off)

@Sartek Год назад

The 486dx4-100 was tripled. There was an oddball 487sx that was socketed and could use an overdrive

@mattparker9726 Год назад

50:11 hmmmm I'd like to see a repair of a tool you use all the time, investigating that cashe problem would make a GREAT video.

@tim1724 Год назад

I believe the Pentium Overdrive had a 32K cache (which can operate in write-back mode on later motherboards, but only in the slower write-through mode on most 486 motherboards). The Pentium Overdrive should definitely be running faster than the 486DX2. (It's more similar to a 486DX4.) I know some early 486 boards aren't compatible with the Overdrive (because Intel changed the specs on the socket) but that doesn't explain why the cache on the 486 DX2 isn't working. I assume there must be something weird with that board or the BIOS.

@ironhead2008 Год назад

The ones that didn't support the WB cache got nerfed worse than that: you didn't have any access to half the cache, so only the standard 16K (it had something to do with cache weirdness and how WT vs. WB cache worked).

@Gannett2011 Год назад

We have those Dot's pretzels here in NorCal.

@TjSBMD1810 Год назад

I have an external Maxell LS-120 for parallel port and one LS-120 disk. Years ago, i was able to make it work under Windows 98. Due to the parallel port connection, it is pretty slow. But what's interesting, it is able to format a regular 1.44MByte floppy to store ~32MByte. Cool device, but not very usable. These LS-120 floppies also seem to be very unobtanium. Another interesting aspect about that floppy disk is, you can see little squares on it. Not sure if that information is useful, but that's what i figured out, when i played with it.

@dionisiosklonaris493 Год назад

Concerning Microid Research BIOS and shadowing: I guess there must be some ROM in UMA in order to be shadowed. If no ROM is present, the BIOS reports this area as "Vacant" and thus cannot be shadowed.

@thinking-laaf Год назад

It was a Samsung S5... One great thing though... It was water-resistant with a removable battery! Before iPhones were waterproof. I never dropped it in water, but I can see a big advantage if one does... Yank the battery out and dry it and no damage gets done...

@MrStevetmq 11 месяцев назад

You may find that the locations the BIOS can't "Shadow" are locations that do not have ROM or that the ROM is switched out/paged in someway.

@poliveri0722 Год назад

The 'Telecom' clip has a 66-block jaw at the very front an a 'Bed-Of-Nails' connecter inside to clip onto telephone (thin insulation) wires without stripping (and not needing reinsulating afterwards) (I am a retired (2010 - 39yrs) telephone repairman/installer. I still have myy butt set, side tools and pole climbing gaffs)

@chloedevereaux1801 Год назад

i have an unopened original imation box of 240MB floptical disks from 1997, i would send them over but they're not compatible with the 120 drives...

@MotownBatman Год назад

It was the Note5, I loved that thing, I Lost the Stylus while writing a Recipie down while working as a chef lol Nobody ever told you this, but you could use a standard Micro-USB Cord!!! It will still work 100% compatible with USB 2: I learned there somewhere around 2015. Blew My Mind that it wasn't common Knowledge. I had no idea lol

@twocvbloke Год назад

I can confirm the Samsung Galaxy S5 had that silly micro USB 3.0 socket, I still have mine somewhere and only relatively recently did I actually get such a cable, doesn't make a blind bit of difference to its' USB abilities as far as I can tell though... :P

@SeanBZA Год назад

Shadow RAM on a lot of video cards did not work because the card used a memory mapped section next to the ROM as video memory, and caching the area would result in the card not being able to display video, as it would not be writing to the right area in the card memory. Common on cards that had extended modes, which did not fit the standard memory mapping. Not all overdrive processors worked well, especially on all motherboards. On board cache on the die was always preferred, and the overdrive processors would often disable the cache on power up, as it was doing cache control, and would only use main memory.

@yusdanjd Год назад

The log - I’m sure there’s people who would love to make the map if you don’t end up getting to it 😁

@mattelder1971 Год назад

I can tell you that Dot's Pretzels are available in South Mississippi. I buy them for my wife sometimes.

@stamasd8500 Год назад

There are pentium overdrives that run at 63MHz as well, but the 83MHz ones are more common. Those run at 2.5x on a 25MHz motherboard (the 83 runs at 2.5X on 33MHz bus). It's interesting that you can run these overdrives at faster speeds than their rated one as well; for instance I am running one of them at 100MHz on a 486 motherboard with a 40MHz FSB. They usually need a little voltage boost to run at the higher speeds, but they are fairly tolerant of overvoltages. To boost the core voltage you have to modify the on-board voltage regulator but that is not too hard to do, all you need to do is insert one (or more) diodes in series with the reference terminal of the VRM chip, each diode adds an extra 0.7V to the regulated voltage. I run mine with one diode which gives a core voltage of 3.3+0.7=4V, with no issues. It doesn't overheat and runs perfectly stable. I know people that run them even at 115-120MHz or more.

@Evhen_Velikiy Год назад

First of all you should use AMI bios, like it was originally on this board. Also check switches of L2 cache, may be its set incorrectly.

@scottwolf9914 Год назад

We have Dot's Pretzels down here in Houston.

@Failure_Is_An_Option Год назад

Nobody cares about Tejus....

@petrcvek Год назад

Problem with L1 cache is definitelly somewhere on board. Inside 486 CPU you can only control cache disable (CD) bit and not write-trough (NW) bit in CR0 register. This can be probably enabled/checked by debug.exe. Rest of L1 cache control is in chipset. Also BIOS usually uses L1 cache as RAM before DRAM is detected and configured. It seems the chipset can be either 82C596A or 82C597 and it seems to be cypress (cypress later bought contaq). There seems to be a datasheet for CY82C597 with registers description how to control cache (also L1 write back configuration).

@kevinwetsch5209 Год назад

I have a SATA hard drive just like that, and it still works to this day. I also find it weird that it has both molex and SATA for power.

@terryraymond7984 Год назад

are you selling any 486's I want a 486 DX

@Torbjorn.Lindgren Год назад

The IBM "Deathstar" moniker was specifically for the 75GXP models, launched in 2001 and available in sizes from 15GB to 75GB and leading to an US class-action lawsuits and a settlement in 2005 not admitting any fault but supposedely paying out $100 to any US user with a failed 75GXP. In my experience back in the days earlier deskstar models tends to be some of the more reliable drives from that era and IIRC the 75GXP was the fastest and IIRC largest disk you could buy when it was launched so they sold really well for IBM. Documents from the lawsuit proves IBM knew they were failing at 10x the rate it should and was trying to evade responsibility and just keep selling them! They really did deserve that moniker. IBM really did a number on their own business with that one, they sold their entire drive business to Hitachi two years later due to the fallout.

@SeanBZA Год назад

I had 2 1G ones, and yes both did eventually fail, one quietly, and the other was just taking longer and longer to read data, till the Adaptec SCSI controller eventually timed out with a BSOD. Had a similar one with a Seagate drive, cured by putting in the freezer for 3 hours in a plastic bag, and making a copy fast before it warmed up. Replaced under warranty by the local agents, though to fail it in the walk in freezer they used as office ( receptionist was wearing a jersey, when it was 30C outside) I had to put the top back on that plastic Seashield case to warm the drive up to 30C, when it would fail.

@button-puncher Год назад

I still remember when I got my 14GXP. First IDE 7200rpm drive, I think with ATA-33 too. SO FAST for an IDE drive. No click-o-death on that one. I've still got it around here somewhere. :D

@orangeActiondotcom Год назад

Yes, the DeskStar drives were very good excluding that specific window of 75GXP model units; I suppose that makes them a great find for us now as most dum dums avoid the 'IBM' and 'DeskStar' HDD branded drives entirely because of a stupid internet meme.

@evanwoliver Год назад

Intel changed the pin out of the PODP *AFTER* they released the specification to vendors. Some of the first boards with the PODP processor socket don’t actually work correctly because the socket is “wired wrong” preventing proper cache operation. There was an interposer at the time to correct the issue, although usually the problem was that you couldn’t use the L2 cache, not the L1 cache. By the time VLB was around I would have thought any such issues would have been resolved. I’d try the official AMI bios and see if that works any better.

@compwiz878 Год назад

A few years ago I curb side picked an EPSON PC in a tower , it had all the original manuals and discs both 3.5in floppy and CD-Rom discs. It had A 486 DX 4 cpu in it iirc it was clocked at 100Mhz , but there was something weird I'd never seen on a 486 Board. The mother board had PCI slots on it , had like 2 ISA slots and 4 PCI slots. I tried to boot the pc but said no HDD found it was in it and spun up , I found the 40 pin Pata cable was disconnected on the MB. reseated it and powered it on and it booted into MS-DOS 7.0 and it had a dos program for Plug n Play driver that loaded and checked the PCI slots for Plug n Play devices. It had 1 ISA card in it that was a ISA ethernet card and 1 PCI sound blaster card. After doing a DIR/W I discovered it had a windows folder . It wasnt set to load windows on startup just booted to the dos prompt after the Plug n Play driver loaded for DOS. I typed WIN and started loading Windows 3.11 WFW once loaded it had a windows Plug N Play utility/Driver for windows 3.x . iirc it took PC-66/100 ram sticks not the standard 72pin sticks of RAM.