Congrats on that build! Best I have seen on RU-vid. I am trying to rebuild it right know, but i am having trouble setting the angle between the front upper arms and the upper spring mount. They are leveled at your build. I wanted to ask what Kind of springs you are using? Or if you got any tips to set the angle? Keep up the good builds, realy impressive!
Shortening the shock shaft helpt! Thats a Lot for that tip 😊 The last thing I am struggleing right now is how to keep the upper front arms in a fix Connection. Do you just screw in the grub screw with good pressure? Or do you use glue/ locktide etc.? Mine Always loosens itself after a short while ... I even in drilled a hole in the screw it's connecting to for deeper penetration. It's reducing the stability thoug.
@@MiniBProduktions Sorry for the late reply. for the upper front arms I just tighten the grub screw with just the right amount of pressure. If you want to use glue, you can.
No worries cus of the late respond! Thanks that you responded anyway! :-) Yeah i just fixed the problem yesterday. The tap i put in the hole was just not good enough. I redid it and now i am able to screw in way further and it all works fine :) I also did another try with 2 more M1 screws from the back (so the 3 build a triangle and hold the inner screw tight) and that also works. So for anyone who also got problems with it. For now i just drilled a little hole in the inner screw as well so I will always tighten the arm at the same point. But just tighten with the right pressure like you said ist actualy enough and with a bit of locktide blue it shouldn't move at all.
@@kuyatangx6909 1. Yes, the screw size is 2mm, but the screw length depends on the size of the gearbox. 2. Yes, you also need to drill the upper arm holes in the gear.