1.9 TDI Gets BIG Injectors! It Rips!

Подписаться 2,5 тыс.

Просмотров 134 тыс.

50% 1

Volkswagen Golf 1.9 TDI, engine code ALH big injectors install! These .280mm injectors paired with a GTB1756VK turbo, front mount intercooler and an in tank fuel pump should bump us up to around 220 whp! An insane jump from the factory 90 hp output, which would more than DOUBLE the horsepower!!
Want to become a channel member? Click the link below!
/ @gashousegarage
Need a factory manual for your next DIY project? Click the link below and use our promo code GHG22 for 22% off your order! It really helps out the channel :)
shrsl.com/4apg1
Want a Mud Mat? Click the link below and use GHG15 for 15% off your order. It really helps out the channel :)
tsuga.us/fsaje6
Links:
Follow us on instagram!
/ gas_house_garage
Injectors:
www.jaminjecti...
Upgraded turbo inlet pipe:
www.darksidede...
Clutch (you will have to call to have them build one):
kyclutch.com/
Oil catch can:
www.amazon.com...
In tank pump:
www.idparts.co...
Wiring kit:
www.idparts.co...
Injectors and tune were built and written by independent entities

Опубликовано:

28 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 269

@wtfobiden Год назад

You give me motivation for my newly acquired 03 golf 4 door tdi manual with 355,066 miles on the dash. All new fluids. Lucas in the transmission. You said it's the perfect daily driver, and I think your right. Now To 500k and beyond

@GasHouseGarage Год назад

It’s amazing what these little engines can handle

@luchnit.9231 Год назад

I don't know about 9s ..lol but she sounds and looks like she's happy, good street runner

@GasHouseGarage Год назад

I think it has the potential to hit high 9’s in the 1/8 😎

@franke0043 9 месяцев назад

Seeing this after i crashed mine couple of weeks ago hurts a little bit inside, but hey, it always comes back stronger! You did an amazing job and after im done fixing it up, made me wanna upgrade my injectors aswell

@GasHouseGarage 9 месяцев назад

Get after it! Theyre a blast to drive

@PartikleVT 11 месяцев назад

this is one of those cars thats gonna be a cult favourite in 10 years, so easy to get good gains and a fun nugget to drive. Most of the vag group 1.9tdi hatches for that matter, allthough u.s doesnt get the skoda or seat. I'm looking to buy a beetle with 1.9tdi and do a similar build.

@GasHouseGarage 11 месяцев назад

Yeah we really got the short end of the stick on TDI’s. The ones that made it here were always the lowest HP spec for the most part

@happybear8499 Год назад

Been a while since I’ve seen this car came a long way I’m impressed well done 👏 Just bought my old mk5 2.0tdi 4motion golf back missed the diesel life haha

@GasHouseGarage Год назад

Thanks! And welcome back. More to come. We all have full time jobs right now so posting frequently is a bit of a challenge.

@DarkAttack14 10 месяцев назад

Man... I killed my injection pump by my own mistake when I installed a set of bigger Injectors on my mk4 jetta.. Glad to see someone do it and not murder their vehicle in the process XD. If you love vw diesels I will say the new common rails are amazing once you delete and tune them. I have a 2012 passat and she rips! I can still pull off 48 mpg on the highway which is pretty close to what my old 1.9 could do

@GasHouseGarage 10 месяцев назад

Yeah a lift pump is a must at these power levels for sure! And stay tuned, we will have a commonrail on the channel here soon 😎

@7eis 10 месяцев назад

Perfect opportunity to get a mechanical pump from eastern Europe ✌️

@MrJeepin88 7 месяцев назад

How much bigger injectors If I do mine I was planning on going slightly bigger but not huge

@GasHouseGarage 7 месяцев назад

Cost wise? It really depends on who is building them. I believe the .280’s were around $400

@EdwardOncki 5 месяцев назад

For this engine 0.280 make no sens. 0.216 is the Best choice and make 200hp+ for more power you need another engine like ARL and Will be cheap beacause you need only bigger turbo and chip tuning for 230hp. Why?? ARL have stronger engine block and all parts inside from factory.

@FPAUTO Год назад

I'm hoping to get full .230 injectors soon. I have .216 a 11mm injection pump, 10mm pump delivery valves, piggyback tuner and a 1852 hybrid turbo, 3 bar. No idea what kind of power it makes. Nice build u got going man!

@GasHouseGarage Год назад

Thank you! Sounds like you got one going yourself too

@fukndrums367 Год назад

How does the 1852 go, I’m thinking of getting the 17/56

@GasHouseGarage Год назад

The GTB series turbos do much better than the old GT style. Less exhaust back pressure and you can make more power with less boost. They also don’t have as many problems with the vanes clogging up. Don’t know much about the 1852 to be honest

@MechanicClaude 7 месяцев назад

Get a 12mm right fuel pump head and an aggressive lift plate.. I have .30 injectors.. holly crap.. It's so fun.. vnt 17vb running 26 psi, cam advance 6 degree, fueling 76 mg a stroke on my tune.. heads ported with dual spring. Screaming beast redline at 6500 rpm.. alh tdi

@earlygamer9106 10 месяцев назад

The Pump nozzles are more expensive than the whole car 😂😂

@GasHouseGarage 10 месяцев назад

Sounds about right 😂

@earlygamer9106 10 месяцев назад

How many firad % are those nozzles ?

@GasHouseGarage 10 месяцев назад

Oh these aren’t like PD’s they’re more along the lines of old school Cummins injectors. The stock injectors for an ALH are 185um or so and the new ones are 280um. The bodies are also a bit larger to increase flow. It was about $400 for the injector rebuild

@earlygamer9106 10 месяцев назад

Oooo that’s Whatsupp because pd’s 100/120 cost here in the Netherlands easy 1000euro or more that’s why I said they cost more than the whole car 😂😂. Btw I’m gonna subscribe your channel I kinda like experimenting with old cars 💯👍🏼

@GasHouseGarage 10 месяцев назад

Hey the $400 still isn’t far off 😂 and thanks for the support! We have more builds coming here in the future, so stay tuned!

@livinglifeboosted1642 Год назад

Nice to see you have Darkside development parts did not know they ship to the us form the uk

@GasHouseGarage Год назад

That they do! And rather quickly too!

@livinglifeboosted1642 Год назад

@@GasHouseGarage one day when that engine fails in that car hopefully not for a long time I would recommend swapping it with a PD 130 AZ engine they can hold crazy amount of power. I have one of these engines running 400 wheel horsepower stock internals with a GTB, 3072vkr turbo The only thing that has been done to. It is ported pistons and it has been reliable for two years without any sign of engine explosions 😂😂😂

@livinglifeboosted1642 10 месяцев назад

Yes, I think I jinxed myself with this comment. The engine finally blew up recently but 80,000 miles with that kind of power running on it. I have now installed another engine see how long this one lasts.

@GasHouseGarage 10 месяцев назад

@@livinglifeboosted1642 Uh oh! What happened?

@wilsonbaird 2 месяца назад

Nice nice! I do have a 2014 Jetta TDI and I would like to have something like yours. Congratulations

@HalfassDIY 6 месяцев назад

Wow, that almost looks professional ! Seriously though, very clean setup. I've left mine stock all these years to minimize the odds that I screw something up, lol.

@GasHouseGarage 6 месяцев назад

Playing it safe is definitely good for reliability

@rivermonstersaustralia2743 10 месяцев назад

Compound turbo setup 👌

@GasHouseGarage 10 месяцев назад

A likely possibility down the road 😎

@rafavsky9126 29 дней назад

There is a dude in Portugal with one of those. Thing pushing well over 450 hp. (1.9 TDI have in mind) iirc 528. It waaaalksss

@gmcassell1 Год назад

Install the 11mm pump head, look for a 6 speed box....and up the brakes..Big time

@matthewavdoulos1341 9 месяцев назад

wow that sounds amazing too for a diesel

@SamusMaximusSMXD 2 месяца назад

You want hose clamps on your catch can hoses, you will blow them off and have oil everywhere

@henkduinman479 Год назад

Hello nice car! I live in The Netherlands and have a golf mk4 arl tdi-gti 180hp and a seat cordoba afn tdi 135hp

@GasHouseGarage Год назад

Thank you! and welcome to the channel! Which car is your favorite?

@Mister-qb1xe 9 месяцев назад

Your golf is manual obviously..which came with a 10mm head pump in the diesel injection pump...in the automatic golf mk4 ..they cane with an 11mm head pump..which will deliver more diesel to those injectors... Once timed correctly its a noticeable difference torque wise... And while your at it fire in an SDI camshaft..boom..get some bigger brakes first tho if I was you ..:)

@GasHouseGarage 9 месяцев назад

Got another 10mm laying around we might do some work to eventually and put 11mil internals in. Headwork is coming next 😎

@alfredSlawny 11 месяцев назад

Only more boost, gtb1756 = 30psi ❤

@kitkat224 10 месяцев назад

very clean golf nice👍

@4X4equals16 10 месяцев назад

done it with 1z 1.9 from 90 to 200hp

@GasHouseGarage 10 месяцев назад

1Z! The original 1.9 TDI

@thedudeof42 7 месяцев назад

What is the fuel filter set up you’re running? Also, did you buy the fuel lines from filter to the injection pump or make them?

@GasHouseGarage 7 месяцев назад

Fuel filter setup is from Nicktane. I wouldn’t recommend the 1-12 thread kit as the filters are difficult to find. The fuel lines running from the filter to the pump are OEM VAG

@sussybaka21 10 месяцев назад

makes a change to see americans work on diesels nice work

@GasHouseGarage 10 месяцев назад

Some of us over here love em! Got a diesel pickup we’re going to make some content on here soon. Stay tuned! Check out the short we have of it racing a G37x

@chriskelly1654 11 месяцев назад

Im putting this engine in a 93 excel.. can you help me get to where youre at

@GasHouseGarage 11 месяцев назад

Sure thing! Have you watched the turbo kit install video? It also has links of where we got those parts. A stronger clutch is definitely recommended. Also, whoever you get your injectors from make sure they pop test and balance them. You’ll also need a nice tune. The key with these engines is not bringing in the power too early to keep the rods from snapping. You can get a budget GTB turbo kit from Darkside if you don’t want to spend the extra for easily swapping the turbo for something else down the road

@captain1butterworth712 5 месяцев назад

What make are the larger injectors

@GasHouseGarage 5 месяцев назад

Custom built by jaminjection. Check out their website!

@Devo-gq5yv Год назад

Just met u at the gas station u got a number

@GasHouseGarage Год назад

Hey man! Send me a DM on Instagram, that’ll be the best way. Link to it is in the video description

@Adrenalinejunkie82 8 месяцев назад

What turbo and IP are you running? If you have an EGT gauge, what are your temps at WOT on long pulls? I recently installed a GT1856V, .260 injectors, head studs, SB STG3 Endurance clutch, 11mm IP on my 03 Golf.

@GasHouseGarage 8 месяцев назад

Hey there! Im running a 10mm pump, GTB1756VK turbo. Longer pulls I’d say around 12-1300°F

@wafflesarecool1 7 месяцев назад

Hey forgot to ask what are you using for tuning? And do you know what torque numbers your running?

@GasHouseGarage 7 месяцев назад

Not sure about the torque as the tune has a torque limiter for the stock clutch. This setup should be good for around 200whp and 325-350lb/ft. The injectors are good for around 250whp, so the turbo is the limiting factor after the clutch. Tekmektronics is who we will be using for the updated tune after the clutch

@wafflesarecool1 7 месяцев назад

@@GasHouseGarage oh cool I’ve heard good things about tekmektronics! I was looking to do a tunezilla/malone stage 5 tune later this year with an upgraded clutch, new injectors and nozzles, turbo, map sensor etc but cascade German commented on my post and said they don’t recommend anything over stage 4 or 300 foot pounds without a LSD, and I don’t really want to spend $1000 on a differential. When I do my Clutch next week I was planning on welding the diff pin, because I know there are common to fail and grenade the trans

@chrisleach7517 Год назад

I'm using .280's, pd150 turbo (gt1749vb), 3bar map sensor and smf on the asv motor, runs at 180hp with 460nm torque Bigger turbo is deffo the next step but i recommend a fmic. I'm still using the factory side mount and it heat soaks real bad Watermeth and a bigger turbo is my next steps - i'd recommend you go bigger than the pd150 turbo for the size injectors you're using, that was a mistake i made

@GasHouseGarage Год назад

Welcome to the channel! The FMIC is definitely a nice upgrade. We saw much lower charge air temps with it

@chrisleach7517 Год назад

@@GasHouseGarage ah i best look at your more recent videos to catch up then! 😆

@gmcassell1 9 месяцев назад

I have a similar setup...what tune are you running... I need some help understanding maps...I want to start learning to doy own Fuelling and tuning.... Mine is currently.smokey on the top end under WOT

@GasHouseGarage 9 месяцев назад

We had the tune written for us. If it’s Smokey and losing power at the top end you might not have enough airflow. What turbo are you running You could also try advancing the injection timing some

@gmcassell1 8 месяцев назад

Its a Gt1749 Hybrid... Thanks for the tip..I'll look into that..

@GasHouseGarage 8 месяцев назад

Yeah you might be running out of air up there. I’d look into getting a GTB series or newer turbo they flow much better than the old GT series

@itsbillymaze4951 Год назад

Need bigger turbo

@LeeFall 10 месяцев назад

5:15 3D print it

@deanbiard3281 Месяц назад

Wot turbo you running

@GasHouseGarage Месяц назад

GTB1756VK

@deanbiard3281 Месяц назад

I got 1856 with darkside front mount full sleeper very happy

@colebarron9810 10 месяцев назад

What are you using for a tuner?

@GasHouseGarage 10 месяцев назад

We had someone custom tune the car. However the interface cable we used was MPPSv13.02

@delta_mk Год назад

Where did u get the box for the air filter? i need 1 f those xd

@GasHouseGarage Год назад

Welcome to the channel! That kit comes from darkside developments

@feellnfroggy 10 месяцев назад

How did it change your fuel mileage?

@GasHouseGarage 10 месяцев назад

Probably around a 2-4mpg improvement overall depending on Highway or city. That’s if you keep your foot out of it 😉

@c4r5on88 Год назад

How do you find the solid mass flywheel over the dual mass?

@GasHouseGarage Год назад

Hi there! We have not installed the single mass flywheel and upgraded clutch yet. We’re actually doing the suspension first as it needs some help. (Video coming soon) but one of our team members drives a TDI Jetta with a single mass and upgraded clutch. It feels just like the stock clutch

@c4r5on88 Год назад

@GasHouseGarage thank you my dual mass is bad so looks like I'll be doing the same. Nice work too those injectors definitely made a difference 👏

@GasHouseGarage Год назад

Thank you for the support! Stay tuned!

@samynaak9074 Год назад

did the .28 affect idle and low rpm operation?

@GasHouseGarage Год назад

Wouldn’t say so much low RPM operation but when it’s cold it does idle a little rough

@Smittyz1 Год назад

Info on the custom injectors ?

@GasHouseGarage Год назад

Welcome to the channel! The injectors have full flow bodies and .280um 5 hole nozzles

@Smittyz1 Год назад

@@GasHouseGarage yea I meant where to get lol, I found the guy. Want to throw some in my UK imported a4 tdi 🤘🏻

@GasHouseGarage Год назад

He does good work

@bradtyson 11 месяцев назад

Asz/Arl swap it

@GasHouseGarage 11 месяцев назад

Hi there! Sadly, we never got those in the states.

@bradtyson 11 месяцев назад

@GasHouseGarage I know but aren't the blocks and heads about/easily accessible nowadays

@GasHouseGarage 11 месяцев назад

Likely, could probably get one imported. I know BEW blocks/heads are everywhere over here. I believe the block is either very similar or the same as the ALH. The rods are really the weakpoint in the VE engines (which we will be doing something about that here in the future 😎). But there are a lot of people making good power from these. I’ve seen a few at 350+whp on youtube

@GhostArmageddon Год назад

Where you located??? I wanna race

@GasHouseGarage Год назад

NC! What cars do you have?

@GhostArmageddon Год назад

@Gas House Garage its taken 8 times to reply

@GhostArmageddon Год назад

@@GasHouseGarage 03 jetta alh wagon built to the max😅 wanting to get a alh diesel runs

@GasHouseGarage Год назад

We should be back at the mooresville drag strip here this summer!

@GhostArmageddon Год назад

@Gas House Garage might have to tow it from indy.

@kndmotorgarage5896 10 месяцев назад

Omg😂😂😂😂😂

@matthewlee2686 11 месяцев назад

Why are you running a maf? Delete that crap

@GasHouseGarage 11 месяцев назад

Tune is map only. The maf is there so we can bolt it to the airbox. That’ll be replaced with a pipe here in the near future 😎

@matthewlee2686 11 месяцев назад

@@GasHouseGarage just use a Dremel and cut the cones out. I've done a few like that

@Lord-Fappington 10 месяцев назад

Bigger injectors certainly do not "double your power" That is moronic.

@GasHouseGarage 10 месяцев назад

The stock injectors are good for at best 110hp. The .280’s are good for around 220-250hp. With the correct turbo to supply the air I’d say it is close to double the horsepower. At least in a diesel 😎

@monsterram6617 10 месяцев назад

"Bigger injectors certainly do not "double your power" That is moronic." Tell me you know nothing about diesels without telling you know nothing about diesels. 🤣

@JoeCorrado95 Год назад

Very cool build! TDI's have a come a very long way since I started modifying mine over 20 years ago. Back then you really only had 2 choices for chips and only a VNT17 for a "big" turbo. One day I'll get back to work on mine. The turbo shaft warped on it about 8 years ago and haven't touched it since. It was a Kerma sourced 1856SV. Going bigger since technology is so much better on turbos now.

@GasHouseGarage Год назад

Thank you for the support! The newer generation turbos are great! Lots of people running GTB, GTC, and GTD’s on these cars now. They’re much more efficient

@bradtyson 11 месяцев назад

Gtb2060vklr best Daily

@alpha_king1778 10 месяцев назад

Now how much hp could it push now tho

@GasHouseGarage 10 месяцев назад

@@alpha_king1778 I think the GTB1756VK is good until the low 200 range. maybe 250hp at best.

@farginicehole513 9 месяцев назад

Question for you guys -- how much better are these newer turbos than my 17/22 hybrid?

@FunGoingFast Год назад

Nice work! Its almost like you are an engineer. Got to ride in ths car and its legit. Pulls like an STI but starts from 1k to redline. Great little sleeper car.

@NOCMPLY Год назад

Dude this is amazing, I've been going through kerma tdi (kind of a rip off for the power you get) but I'm invested in this build. You should do a 3 inch straight pipe if you haven't already.

@GasHouseGarage Год назад

Thank you for the support! And it’s already got one 😎

@daviddaoust8841 Год назад

currently building a mk4 1.9L. This video is so helpful. keep killin it.cheers!

@GasHouseGarage Год назад

Thank you for the support! More to come on different vehicles too!

@th3master Год назад

I have an 1.9 TDI AHF with bigger injectors and hybrid turbo but unfortunately where i live (Portugal) its not possible to have a modified car like yours with bigger intercooler or anything that is not stock is not allowed without being penalized by the Police. Would be alot of fun to have my car with the same mods as you !

@GasHouseGarage Год назад

That is unfortunate! At least you can still have a bigger turbo and injectors!

@th3master Год назад

@@GasHouseGarage yeah because its not noticeable 🤫

@snowfreak207 Год назад

I'd like to know what intercooler is there a universal one?

@snowfreak207 Год назад

I'd like to know what intercooler is there a universal one?

@GasHouseGarage Год назад

Hey there! Check our first video out “golf gets a turbo upgrade” We have a link to the intercooler in the description as well as a breakdown of the parts

@garyskinner2422 Год назад

Darkside components, top notch From England

@qbs2k609 11 месяцев назад

Cool setup bro! I have the Audi A4 B5 with 110Hp AFN Engine with bigger turbo. 0.216 injectors, central IC and it does 150HP at the moment. Love these old TDI's - can be fun to drive while still reliable :D

@GasHouseGarage 11 месяцев назад

Thanks for the support! And for sure. MPG actually improved a little bit with the new injectors! The old ones were likely worn out after all the mileage

@whatsup8464 10 месяцев назад

Fit an sdi camshaft for longer duration on the valves...11mm injection pump for some more horsepurrs👍

@GasHouseGarage 10 месяцев назад

I’ve heard a lot of good things about the SDI cam. More airflow 😎

@Helder_Paulo 10 месяцев назад

220 wheel hp? at the crank and should be very good

@GasHouseGarage 10 месяцев назад

The injectors and turbo are good for about 220 at the wheel. Torque limiter in the tune is probably bringing that down some but that’ll go away when we get the new clutch in

@Helder_Paulo 10 месяцев назад

@@GasHouseGarage in Portugal we do this setup for more than 10 years, an 1756vk or 2056vk can do max 230hp at crank. And still need exaust, fuel pump 12mm, front intercoller, new piping, map sensor 4bar or 6, fuel tank pump arl(pd150) to help to create more fuel pressure and a big tune for 220. And the new head bolts and gasget

@GasHouseGarage 10 месяцев назад

How high are you revving the 12mm pump? From my understanding they don’t take revs very well. If we can get 200 at the wheel on the dyno I’d be happy 😃

@Mt24855 10 месяцев назад

Mk4 was my first car 1.6 16 valve ❤ those TDI's i remember used to get 150 hp with just a remap. You do know a bora front end bolts on i was always looking someone with a blue bora to do it with mine lol they called them bolfs 😂

@GasHouseGarage 10 месяцев назад

Bolfs! That’s pretty funny. Here in the states they call them Jolfs 😂

@Djreucroft 6 месяцев назад

I have a pd150 Bora , engine rocks like It’s going to fall out when I start it and turn it off .. I replaced dog Bone mount and engine mounts still does it …. Is it normal for these engines ?

@GasHouseGarage 6 месяцев назад

Diesels are usually pretty harsh on startup and shutdown, but if it seems excessive then you could have other issues. How are the other engine mounts holding up? I was gonna say dog bone but it sounds like you’ve already got that covered

@shueibdahir Год назад

Take out the headliner from you car, install an alcantara fabric with foam backing and watch your interior become insanely good looking!

@GasHouseGarage Год назад

It definitely needs to be done!

@insidebyte8561 Год назад

Glad you took my suggestion for the upgraded tip pipe, I saw a difference on my pd with a gt1752v, you should feel a big difference with response!

@GasHouseGarage Год назад

It was night and day!

@rakeandbake 7 месяцев назад

What’s an upgraded tip pipe?

@kazumadesu3839 3 месяца назад

Saving this channel since I'm looking to get better performance on my 02 beetle

@GasHouseGarage 3 месяца назад

Welcome!

@AgrointesaAlmacén Год назад

Men more videos about this delicious

@civicekcoupe Год назад

Like the turbo intake pipe

@getdeleted8660 10 месяцев назад

where do you find mechanics like this in the real world

@karlisbirznieks9086 Год назад

Nice video! Quick question, what is your fuel consumption now when driving normally?

@GasHouseGarage Год назад

Thank you for the support! No different from before. If anything it has gone up slightly. That’s if you’re driving normally :)

@karlisbirznieks9086 Год назад

@@GasHouseGarage really? That’s amazing, can’t wait for the dyno video.

@GasHouseGarage Год назад

Yeah! It’s pretty amazing haha. The MPG increase is probably due to the new injectors. The stock ones had 300k on them so I’m sure the spray pattern wasn’t very efficient. Stay tuned!

@mikeA292 10 месяцев назад

Exhaust gas temperature gauge and intercooler next

@noahprzydacz4162 Год назад

Loving the content. Should take it on the street and see what it can keep up with 🤙🤙🤙

@GalbraithEli-m5i 25 дней назад

Hall Robert Perez Steven Clark Dorothy

@hellothere9317 10 месяцев назад

really really good video im proud to be here before 2k im sure this channel will go far and im hoping to see more content!

@GasHouseGarage 10 месяцев назад

Thank you for the support! We really appreciate it. Stay tuned! More to come

@romannikonorov4204 Год назад

Guys, keep that sh up, its so interesting to watch, how you build your vw golf, ima huge golf fan, this videos are really helpful. Thank yall!

@GasHouseGarage Год назад

No problem! Thank you for the support!

@sadboisonly1004 7 месяцев назад

Now did you upgrade your injection pump from the 10mm to the 11mm?

@GasHouseGarage 7 месяцев назад

Still on the 10mm pump

@Brandonhere1018 Год назад

Love the build man! enjoying following along. If you don’t mind me asking, where’d you purchase the head studs from? I’ve been bugging arp for about a year now to get an update on production lol and they keep pushing the availability date

@GasHouseGarage Год назад

Hey there! Thank you for the support! The head studs I purchased from XDP. I had heard the same thing so I was kind of surprised they had some in stock

@chip1gray Год назад

I am about to embark on this journey myself and was wondering if it was not worth just slapping a pd150 in there as they can be had for around the price of a new turbo in the UK £500-800

@GasHouseGarage Год назад

That is totally up to you! We never got the PD150 in the states, I believe the highest output PD’s came in Passats here but those were 2.0L BHW’s at 134hp. Golfs and Jetta’s were PD100’s. Don’t be too shy of the VE engines. Our tuner is making around 320whp in his daily VE TDI with large single. I wouldn’t run much more than 200-250whp on a VE without lowering the compression a bit though

@chip1gray Год назад

@@GasHouseGarage Never knew you didn't get the big 150pd! I have done some minor tuning on a AAZ similar setup but never big horsepower numbers. Was thinking of putting a full mechanical pump on like a landrover 300tdi pump as that's a common mod here in the UK.

@GasHouseGarage Год назад

In the rover, are those the 5 cylinder tdis?

@codyfournellcsrf5164 7 месяцев назад

Wish I had friends who would do this with my mk4 jetta lol I'm a total car noob how much did this cost you?

@GasHouseGarage 7 месяцев назад

I'm sure you could find some to help you with your next project! Maybe go to some local VW meets and start chatting! Just the injectors were around $450. The whole ordeal, turbo, injectors, FMIC, pipe kit, tuning, and the oddball pieces here and there was probably around $3500-$4000, however you don't need to spend that much to make similar power. The turbo kit I went with was more on the expensive side. Darkside sells a cheaper kit with the same turbo for about half the price

@alessdiazlopez54 Год назад

WoW man, nice build! I have an interesting question, wich smf did you mount? Did you notice more noise or vibration? I'm thinking about swaping mine to, thank you!!

@GasHouseGarage Год назад

Thank you! The car still has the stock clutch in it at the moment. We will have a SMF and upgraded clutch from Kentucky clutch going in soon!

@alessdiazlopez54 Год назад

@@GasHouseGarage wtf and the stock clutch doesn't slip with this injectors?

@GasHouseGarage Год назад

I’m equally as shocked hahah but our tuner put a torque limiter in the lower rpm’s to help prevent clutch slippage, so far so good! Right now the power really comes in after about 3200rpms, but it also pulls all the way to 5k

@gustavoc4239 3 месяца назад

What are the buttons, in the driver's door pocket?. Greetings.

@GasHouseGarage 3 месяца назад

Just window switches, window lock and door lock. The ones below are for the gas flap and the hatch release

@Brongy 4 месяца назад

Bro I Hope You Get The R32 Front Bumper... It's Been 1year

@GasHouseGarage 4 месяца назад

Eventually. The clutch and limited slip are higher up on the to do list though

@knolez1546 7 месяцев назад

I've been driving around with the MAF and EGR unplugged, and all emissions parts deleted and piped, she runs great now, and goes chooo.

@410Alec Год назад

Definitely wanna see it back at the track

@joshhassler 5 месяцев назад

How did doing one headstud at a time hold up? Ive done it on a 6.0 ps for a friend but the thing got wrecked very shortly after and never got to see how it held up.

@GasHouseGarage 5 месяцев назад

So far so good! Haven’t had any head gasket issues and the car has had this setup for around 20,000 miles now

@joshhassler 5 месяцев назад

@@GasHouseGarage nice good to hear! Thanks!

@paullynch7672 7 месяцев назад

Wait till he's a bit older, & gets a real motor B/Vairon A/Martin,,etc , all that power in his vw who needs the above,,,

@snowfreak207 Год назад

What u tune with

@GasHouseGarage Год назад

Tune was written by a forum member. I don’t believe he has a website or anything. You can try searching “skaude tdi tuning” on Facebook, that’s his page

@TheIggy861 10 месяцев назад

120% injectors, gtb2260vklr map done rapid

@lithsooo 11 месяцев назад

The song is amazing for 1.9 TDI VP !

@thatboostedsierra 11 месяцев назад

Nice. Now it can keep up with traffic LOL

@GasHouseGarage 11 месяцев назад

I’d say it’s quicker than your average car

@farginicehole513 9 месяцев назад

@GasHouseGarage He's obviously never driven a modded TDI. The torque is so much fun!

@nuherbleath461 10 месяцев назад

I bet you still get 70mpg

@GasHouseGarage 10 месяцев назад

Not quite that high but it’s up there!

@MrMaster2262 8 месяцев назад

Twin (Garrett gtx5544r) Turbos 😜👍

@jvinsnes 9 месяцев назад

Was your ALH 90hp stock? I though only the AGR had 90hp

@GasHouseGarage 9 месяцев назад

Yes! The ALH is ~90HP as it comes from the factory

@jvinsnes 7 месяцев назад

@@GasHouseGarageWastegate turbo? in Norway ALH was always vane turbo 110hp and AGR WG 90hp

@GasHouseGarage 7 месяцев назад

@@jvinsnes yeah VNT15 turbo with variable geometry. Here they’re rated at 90hp

@wafflesarecool1 8 месяцев назад

What type of clutch was that? Who made it?

@GasHouseGarage 8 месяцев назад

We’re still running the stock clutch. Working on getting the new one in. The new one was built to spec by Kentucky Clutch. Give them a call and they can build one for you to whatever power level you want

@wafflesarecool1 8 месяцев назад

@@GasHouseGarage wow that is so crazy. You just solidified my decision! Those were the guys I emailed yesterday! I made a post on a Facebook group and they were recommended by a few people so I had already contacted them but I was just curious what your clutch was. People have said good things about them and the price is very good too

@manuelgomez2715 3 месяца назад

Thanks

@GasHouseGarage 3 месяца назад

You’re welcome!

@wc4260 Год назад

Bro I just installed rear beam bushings, vr6 front brakes, and some bc coil overs on my alh. I have stage 4 Malone rn w 216s. But ima be doing turbo intercooler and bigger injectors after a 6 speed swap. Glad to see another alh living it's best second life.

@ilhanbektas77 Год назад

Alt yazı Türkçe seçeneği yok Çok iyi iş çıkarmışsın tebrikler

@GasHouseGarage Год назад

Thank you!

@kylewilson8150 Год назад

Were did you get the kit for fitting the pd in tank pump? It looks very tidy. Thanks

@GasHouseGarage Год назад

Welcome to the channel! You can get the wiring kit from IDparts

@sargeatlarge24v Год назад

Where did you get the bigger intake pipe at?

@GasHouseGarage Год назад

Darkside developments has them. Email them the info on your car and what you’re looking for and they will steer you in the right direction

@TheHalbhas Год назад

Hey man great video and great car down there, i have an mk4 but atd engine 101hp, actually made an ecu remap and we'r almost at 150hp something less 330nm torque, and it already smoke almost like your but i have stock injectors, how do u manage with black smoke to avoid being like a carbon train in 2023? i would like to improve it bit more like 180hp more or less without loosing acceleration. any suggestion?

@GasHouseGarage Год назад

Thank you! And welcome to the channel! We didn’t write the tune. But we do understand it somewhat. You could try reducing fueling at lower RPM’s with a little bit more boost without raising exhaust back pressure too much. This might clear up some smoke down low. Another thing to check is piping. There was a noticeable difference in smoke when we went with larger turbo inlet and outlet piping. The 90hp VE stock piping is very small though

@TheHalbhas Год назад

Thanks alot i'll check it out, hope to see more mk4 videos in the future.@@GasHouseGarage

@GasHouseGarage Год назад

Stay tuned!

@STRANGE_hour 11 месяцев назад

sweet

@tylergallant4404 10 месяцев назад

I like your style of video and am now subscribed!

@GasHouseGarage 10 месяцев назад

Thank you for the support!

@jenningsjackson3399 Год назад

Roll more coal!

@richardlucker Год назад

my old alh had injectors identical to the ones you have and with the original turbo gt15 doing 2.1b every day 😆

@cesarsolis6379 4 месяца назад

Nice where can I find these injectors I have a 2001 ALH 1.9 Jetta 5 speed.

@richardlucker 4 месяца назад

@@cesarsolis6379 At the time, I exchanged the original injectors for ones already assembled and calibrated with a larger caliber with a colleague, but if you look for parts stores in Portugal (Santerchips) for example or search for 1.9 vp injector nozzles, they will appear for sale

@csanderson1320 9 месяцев назад

What is all done to the engine? This looks like perfect power to keep my trans alive in my alh ranger swap and still be peppy. How well has it held up?

@GasHouseGarage 9 месяцев назад

So far 30k miles and it’s still kickin. Biggest thing is to not bring in the power super early with the tune or lug the engine. It’s a diesel yes but it’s also a very small one designed for passenger cars. Basically just headstuds, GTB1756vk turbo, .280 injectors and some pipework

@csanderson1320 9 месяцев назад

My ranger only weighs 500 more than my 02 jetta. I may go with a ARL rotating assembly for peice of mind on the bottom end

@csanderson1320 9 месяцев назад

What psi is your boost cut?

@GasHouseGarage 9 месяцев назад

Roughly 30psi. That’s a about what the 1756VK is good to