Hi, I have a problem, I connected the internet to the router, from the router LAN to the PC, there I ran your programme The yellow colour was on for a long time and that's it, no more reaction, waited about 30 minutes, the adapter says "network cable is not connected" and then immediately identification..., then no connection again, then again. and so two routers are die. Is there any way to restore the routers? or install openwrt by other way?
There should be a way to at least revive the two dead routers. Just have a look at the OpenWrt site and find "debricking you router". There even are videos here on RU-vid about debricking your Xiaomi router. There 's a bit of tinkering involved but it is not at all rocket science. Be aware that the Xiaomi Repair Tool is in Chinese, so you will need a video telling you which buttons to press. In my case the worst bit was to keep the silly Microsoft Defender from deleting the tool as it was classified Malware. It works though. I 've debricked my AX3600 several times with it. The TFTP solution is also working, I tried that too.
There is some in the forum recovery i have not try it .it may use serial usb . Look it up openwrt mi 4a website . Is your router 4a. Because the firmware built in is for 4a . If router model it may not work or brixk
Change the firmware located on the folder . With the right one cos the built in firmware there is for 4c . Exploit may work but have not try . Your risk
Can you guys give me the correct link of openwrt firmware for Mi4a Gigabit version? And help me to know where I should put it and replace it with which file? I'm newbie
Hello, i have flashed it to Padavan from your link, but it is 2018 firmware, if you can update it to the latest, please let me know, Thank you for your help 🙏
