#1 Issue with Flat Bottom Jonboats

Подписаться 18 тыс.

Просмотров 18 тыс.

50% 1

I see this issue with a lot of flat bottom Jonboats. They just are not as strong as the V nose models. It's simple engineering the entire hull coming to a point makes them extremely durable compared to the square nose. I have seen some improvements in some of the newer models, but it's definitely an issue they know about. This repair was a bit dramatic but after so many patch jobs I thought it was the best solution. I feel confident that this will no longer be an issue with this boat!
Follow Tricked Tins on my other social media accounts for giveaways and special offers👇
bit.ly/TRICKEDT...
bit.ly/TrickedT...
www.TrickedTins...
Follow my Videographer👇
/ ricomarcelophotography
/ ricomarcelophotography
/ _rico_marcelo
Follow SBFISHINGTV👇
bit.ly/sbfishingtv
My brothers company check him out👇
...
bremmyproducts...
bremmyproducts...

Опубликовано:

26 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 80

@christinerogers5331 Год назад

To sum this video up, simply PROFESIONAL!!!! AWESOME REPAIR!!!

@TRICKEDTINS Год назад

Thank you I feel good about it

@manchurob6432 Год назад

Video quality is getting a lot better. Nice one! Love how you quickly explain the problem and the fix...and then do it. Excellent editing!

@TRICKEDTINS Год назад

I do appreciate that. Recording and editing these videos is still a lot of work. I learn something new every video. Thanks for the feedback

@RA-zl6iw Год назад

I’m a self taught welder, still learning, not great yet. I’m really struggling to tig weld aluminum and at times I hate it. That was a nice job you did and a lot of work

@TRICKEDTINS Год назад

Hmu on FB, or IG messenger ill give ya tips. It's nothing to hate brotha. Links in the description.

@traviscrowell476 Год назад

Matt you the man! Thanks for fixing my boat!!

@TRICKEDTINS Год назад

Thanks, Brotha! Keep putting those big girls in it!

@DougSloan-xi7kt Год назад

This just happened to my same exact boat. Only info I have found so far. Thank you

@TRICKEDTINS Год назад

It's a recurring problem with square nose boats. Usually spawns from incorrect trailer set up. Lmk if i can help.

@rodconner9079 Год назад

Damn Boy!!! The amount of time ya got in that --- and edited down to 20min ........ and still show the "product"; my hat's off to ya bud!!!! Great work!!!! That constant "pull" against or on the loop really shows where the stress is; it's the flex on the "gauge". You definitely made a difference by "spreading the load". The only additional "strength" builder to add would have been to go up into (through the hull) the cross-rib with a direct attach with the plate allowing the pull to be spreading the width of the boat, then again - that may be overkill! :) Love it my friend!!! Be Safe

@TRICKEDTINS Год назад

Thanks man. I thought about that originally, but i really dont think its necessary. Thanks for watching brotha!

@greenpighunter6930 Год назад

Excellent job. My 05 Lowe 1448 has been rode hard alot while wet, been to 6 States and the bow eye looks new.

@TRICKEDTINS Год назад

Thany you. That's awesome Your trailer must be a perfect fit.

@timg185 Год назад

You do awesome work! Your welds are better than the welds on my 2019 $35,000 Ranger . I sold it.

@TRICKEDTINS Год назад

Thanks. I've had 20 years of practice lol

@victorremick9721 Год назад

Now that is a really NICE FIX

@TRICKEDTINS Год назад

Thx brotha!

@ericweaver4152 Год назад

He fixed my southfork SS 18x56 same thing happened. Great work

@TRICKEDTINS Год назад

Thanks for sharing! That was 8 months ago, but its a perfect example of a brand new boat from a completely different brand with the same issue! Here's the link to that video! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-2id6wonc2vo.html

@TRICKEDTINS Год назад

I really appreciate you sharing brotha! Been a while. How's it holding up? Be honest. Either way, I want the feedback!

@chrism4715 Год назад

You are one hell of a craftsman exelent job

@TRICKEDTINS Год назад

Thanks brotha!

@dfry16 Год назад

Nice work, my Alumacraft 1648 has the same issue maybe not quite that bad. I’d gladly pay 850 to have it fixed like that if I could find someone local I trusted enough to do it. Love the content keep it coming!

@TRICKEDTINS Год назад

Thanks brotha!

@VinceFoster Год назад

Amazing work!

@TRICKEDTINS Год назад

Thanks brotha!

@JohnLewis-gi5vp Год назад

Great work.

@TRICKEDTINS Год назад

Thanks brotha!

@Nick-gi6ym Год назад

Great job

@TRICKEDTINS Год назад

Thanks brotha

@kegger7676 Год назад

What's you thoughts on an 1860 Jon to start with for a conversion, I am thinking Lowe Roughneck 1860...I am a big dude at around 400lbs. Any other I should be looking out for, looking to buy a new hull in 2023. Keep up the great work, videos are great!

@TRICKEDTINS Год назад

Roughneck is a good boat. Tracker Grizzlys are similar in price and quality in my opinion.

@Pitchpullin5 Год назад

Badass work, may I suggest replacing the carpet bunk boards with PVC bunks. I don't have to power load and slam my boat on the trailer.

@TRICKEDTINS Год назад

Not a bad idea. You have to be careful with those. I've repaired a bunch of boats that have slid off the trailer at the ramp. I dont care what bunks you have. never take the front winch cable off until the trailer is partially in the water. Nobody wants to be that guy 😆

@Pitchpullin5 Год назад

@@TRICKEDTINS I agree, I was able to push my boat off with one finger. I can easily see how someone could forget and have their boat slide off. I do have to stay in the throttle while loading and walk up front to hook up the eye then walk back and place it in neutral. If not the boat will slide off the trailer. If I could do it over I would have went with the 2x6 boards vs the 2x4's.

@TRICKEDTINS Год назад

@@Pitchpullin5 thanks for sharing!

@Pitchpullin5 Год назад

@@TRICKEDTINS I appreciate you reaching with us on your channel brother.

@chicagolandrc8661 Год назад

What do you think of the welbilt brand. I have a grizzly 1654 tunnel. And looking at getting a weldbilt 1860 tunnel. I think the gauge is thicker on the 56 and 60 welbilts

@TRICKEDTINS Год назад

Yeah i think so. The Weldbilt hulls are nice, but the interior options they install suck. Watch this video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-dwaCrf7n5ac.html

@riverpirate1022 Год назад

Amazing work but I hope you or someone painted it after.

@TRICKEDTINS Год назад

Thanks, brotha! Customer did his own paint job.

@joshrhodes281 3 месяца назад

How much to weld pods on 1654 tracker prep work already done just weld

@TRICKEDTINS 3 месяца назад

Around $500

@josephdiesing8506 Год назад

I understand that flat nose is structurally weaker. Do you think that it’s also because all of the additional weight due to the built out jon boat? Or have you seen this issue on completely bare bones flat nose?

@TRICKEDTINS Год назад

This boat is stock from Backwoods Landing. It happen before any modifications were made to the hull. In my opinion, they need more reinforcement and special trailers. Your boat will be stressed way more on the trailer, than on the water.

@johnwimbs2157 Год назад

I love it. But why did you hlfass it three times well,,,:at least two times. Then badmouth the other guy before doing a proper job?

@TRICKEDTINS Год назад

The customer wasn't ready to spend the money and fix it permanently. Besides, my previous welds were excellent. The boat has a bad design. If you weld that bad, you shouldn't be taking on projects like this...

@RA-zl6iw Год назад

What type of aluminum do you use for your boat fab work?

@TRICKEDTINS Год назад

Thickness varies depending on the application, but I use alloy grade 5052. It's bendable and tough enough to last a lifetime!

@swissarmychainsawadams9541 5 месяцев назад

BOOM!

@TRICKEDTINS 5 месяцев назад

Thanks brotha!

@noobsearn2die342 Год назад

What Jon boat model is this?

@TRICKEDTINS Год назад

Weldbilt 1652

@MichaelCraig-bi3wj Год назад

Another bullet proof repair, when you going to start bass fishing man?

@TRICKEDTINS Год назад

HAHAHA, Today! I fished my first tournament with @SBFISHINGTV today. We placed 2nd! He caught the fish, and I netted them 😆 🤣 😂 I did catch one small one tho. I'm a very competitive person. I can see myself getting into

@MichaelCraig-bi3wj Год назад

@@TRICKEDTINS Oh man I want to see that!! at least you got a taste of it and with a great guy to.

@TRICKEDTINS Год назад

Im sure sb will drop a video soon

@matthewhoopes4440 3 месяца назад

The price seems extremely fair

@TRICKEDTINS 3 месяца назад

Yessir

@esper_flip6891 Год назад

Crazy how a 12x12”x3/16 plate on the inside of the hull from the factory would have avoided all that work.

@TRICKEDTINS Год назад

Facts

@fishingistherapy 11 месяцев назад

Getting this issue repaired on my jon boat this weekend. How would you recommend setting up the trailer to prevent this?

@TRICKEDTINS 11 месяцев назад

Boat needs to sit flat on bunks. Also I added a cross board from port to starboard above the winch roller. Seams to help distribute the load.

@fishingistherapy 11 месяцев назад

@TRICKEDTINS Nice. Thanks the valuable insight. Added a Yates etrailer flat bottom jon boat flat stop instead of the bow roller to correct this issue, as I had the same issue you went over and just got mine welded this past Sunday. Thanks.

@Therapy-n-Session Год назад

💪🏾💪🏾💪🏾

@alsbr00ks25 Год назад

Fun fact this is my uncles boat

@budcat2 Год назад

I think I own that boat now. Not one like it but that boat in your video. I just checked and the patch is there. Installed well enough to look like it was OEM. Thank you for the great job. I will be using it all over Texas.

@TRICKEDTINS Год назад

Not surprised. Definitely went to Texas. Thanks for sharing.

@budcat2 Год назад

I am a disabled Vet. Had my knee replaced and my hip x2, I got this boat to help me in my recovery. The 1652 is super stable and I have no worries as I move about the boat. I have completed a few trips and think I am now ready for an adventure. I will be doing a trip down the Sabine River below Toledo Bend Dam to the Gulf. Camping along the way. That front deck is big enough for a Cowboy bedroll, but there should be plenty of sand bars. Wish me luck. @@TRICKEDTINS

@marklaramie7393 4 месяца назад

Damn Matt, nice work bro...... 🍻

@jeremycappert8906 Год назад

You do very nice work, always enjoy your content and videos. Hopefully one day I can swing by your shop

@TRICKEDTINS Год назад

Thanks, the door is always open!

@maddgoatee9708 Год назад

Top rate repair. You killed it. If it was my boat I would been very happy with that repair. Great video.

@TRICKEDTINS Год назад

Thanks brotha!

@wmkess Год назад

Would this same approach work for a riveted flatbottom Alumacraft? I know the hull material is thinner. I have a 1648 riveted one and it has the eye riveted onto the flat front at the top. Not only is the location bad but it was about 2” off center from the factory brand new lol. Makes it a pain to winch up straight.

@TRICKEDTINS Год назад

That sounds like a pain in the ass. Idk man. I hate riveted boats, but that's the only way I would know to repair it. Goodluck brotha.

@wmkess Год назад

@@TRICKEDTINS Appreciate the reply. Love the vids. Keep up the good work.