10/07/23 Loading the Maschio

Подписаться 45 тыс.

Просмотров 14 тыс.

50% 1

Improvise and overcome. There is always a way to get the job done, you just need to find it.
You can support us by becoming a channel member. All income generated from membership goes back into the farm... All of it.
Looking for our MUSIC source for your own videos? Loads to choose from and you can find it all here. audiio.com/pri...
Support the channel and farm directly by becoming a channel member, you can enjoy early and advert free uploads, members only content, and a few extra bits not available to any one else.
/ @farmerp
Or you can choose a one off donation by Buying me a coffee here.
www.buymeacoff...
Fast track access to some of the camera gear... And other things I use regularly. We earn a small commission from any purchases you make through this link.
We are.....
Bradley farm, Bradley green, Wotton Under Edge, Glos. GL127PW
United Kingdom.
Email us on... farmerpullen1@gmail.com
www.amazon.co....
www.ebay.co.uk...
/ farmerp.bradleyfarm
/ farmerp_

--------------------------------------------------------------------------------
If you wish to make a purchase or donation you can use the link below.
Please remember, we are not asking for donations.
Thank you.
paypal.me/Farm...

Опубликовано:

12 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 88

@sandymcghee3328 Год назад

Nice job mr. P. 👍👍

@lyndan08 Год назад

I can’t stop hearing famous Dave’s cries for a a telescopic handler 😉

@MrDbone75 Год назад

A very good Saturday evening to you all

@andycruickshank1671 Год назад

A farmer will always find a way.🙃

@prjndigo Год назад

Doose was right there, couple holes for the front wheels and they could have backed under it just fine.

@richardleigh1762 Год назад

There are no problem's , only solutions .

@trevorsidley7697 Год назад

First off - I enjoyed that. Just another part of your daily life. Thanks for sharing. Problem solving is a big part of Farming. Good job you had new front tyres on 695. Might have challenged the old ones. I guess putting the topper on a pallet would have made it a simple Mustang job. PS Want to buy my 3pt linkage forklift?

@FarmerP Год назад

I used to lift our old topper on a pallet, I can’t do it with this one.

@peterfrebold Год назад

... at one point while disconnecting it looked as if the travel pins were not in and they never, through the whole process of readying and loading were they visible again .... smiling, just an observation ..... thx for the share .. as always .. never stop dreaming, just dream bigger .. have fun be safe, save our oceans ....

@FarmerP Год назад

Well spotted sir, I did indeed forget to put them in again, which meant going through the process of putting it all back on … again 😄

@peterfrebold Год назад

@@FarmerP .... Laughing .... damn! having to put it back on, know that is a pain .... thx for the reply Ian ..... make it an exemplary week ....

@ronanmulcahy4564 Год назад

Ah😮 Should have got a McConnell wouldn't have broken after handy usage a hand full of times, live and learn Keep it going 👍

@LordClunk Год назад

01:45 Drop topper on a pallet with the tractor, then pick up the pallet with the topper on with the skid steer. Problem solved.

@FarmerP Год назад

Can’t do it with this machine. There are three points of contact that would need a pallet three meters by two meters square. I recon the Mustang would struggle with that.

@craigdoig9486 Год назад

19:11 great content again

@tracktime1196 Год назад

I love it how you keep admiring those new front tyres 😂

@rogernorman200 Год назад

What they call ‘ The delicate art of balance’. Well done Ian - necessity is the Mother of invention.

@paddy294 Год назад

Cracking video. There’s always a ways and means of doing something

@alanwallace8095 Год назад

Morning Ian, great video as always. Shows how enterprising farmers need to be to get jobs done a lot of the time, and to understand how to do it as safely so no one gets hurt. The manufacturer is responsible to provide information on how to sling and lift equipment like this which has a strange centre of gravity. On another note, noticed the log splitter on the back of the tractor. It would be good to see a video of it in operation with some of your guys as I need to purchase one and not sure on the best type. Keep up the good work😊

@paulmiller8886 Год назад

That was fun seeing you figure that one out. Not dodgey at all.

@williamhawks2372 Год назад

Poor doggie I’m ashamed. He’s very cute and lovely.He is your best friend Mr. p ever had come on mr P

@rogerg1840 Год назад

👍👍👍👍

@russellsteele4404 Год назад

👍

@peterlockyer1348 Год назад

very good video you will always find a way to do things that’s what you have to do when you working on a farm 👍❤😊

@antonyfarming Год назад

Good old case gets the job done again 😁👍👍

@fredharrowven1040 Год назад

Hi and good evening Ian, Nice little video all well your end not to bad this end you know what it is like you just push on and hope for the best, well you take care of your self and the family,.🚜🚜⭐️⭐️⭐️👍

@charleshart6992 Год назад

Great job!

@johnm7354 Год назад

😀

@teversoncoleman496 Год назад

Good evening Mr. P . congratulations that was well worked out lets hope the unloading goes as well as the loading. Keep well and stay safe. How's the little calf doing. Keep well and stay safe.

@angelad7164 Год назад

Evening farmer p mum p abbi holli emma sam bisskit and ur other dogs Good vlog Farmer p if u have a situation im sure u will find a way out and around it wont u Farmer p i hope u got the rain u wanted cos here in welsh wales we ve had a bit of late in the day and nite time and tonite its windy also Love u guys💚💙❤️

@paulbarr3981 Год назад

Ian, here in the US, there is an honorable profession of "riggers." They do what you just did. Figure out weight against balance against lifting points against how high and how far with usually an obnoxious piece. Well done.

@MickHodgson-q1k Год назад

I worked with riggers years ago on a construction site for an onshore oil terminal, I was operating the small crane (A County Tractor with Hiab) - those boys certainly knew their job.

@andrewhole9122 Год назад

Its easy when you no how farmer p 👍👍

@billrudgard8101 Год назад

Ingenious. Not ropey at all 🤣🤣. See what I did there! Crack myself up sometimes 🤪😐😐😐

@TJMack- Год назад

Perfectly safe 😂 Do you notice any difference after changing the tyres on that tractor?

@FarmerP Год назад

Not really, apart from feeling a lot safer 🙂😄

@johnz9623 Год назад

You should put in a hoist - even if it's just a manual chain fall. Would make loading those fertilizer bags safer. You'd probably have to have your steel guy add some structure to your shed. I don't think trusses would handle the load.

@Sooty Год назад

Interesting vblog 🎉 Hope the weather improves its Friday 14th here and rain all day and tomorrow 😢 Regards to all at Bradley Farm & Biskit 🎉

@tony-yp6qk Год назад

The💩house is looking good 💯 Another great video has always farmer p ian and Mrs p mother in law p Sam emma Abbi and holli and miss biskit miss crumble miss gypsy miss pepper and miss pickle miss Muppet 👍

@chriseccles1454 Год назад

Strops on the topper with a stroppy dog watching your every move and pinching your vacant seat😅. Told you about that 3rd spike. Could you have loaded down hill with swing away and Dave drive trailer back under.

@andyellis307 Год назад

Nice job Ian you made that look so easy lol and from bitter experience I know it wasn't

@prjndigo Год назад

Poor thing thought you were going out with the bunny chaser. I'd have done the loops on the forks like you did but then thrown the strap ends over the top and back of the forks and behind the head on the loader then run the tine through the arch and strapped on. Or marked my wheels, moved the tractor, dug holes for the fronts and piled the dirt for the rears and let them back under it if the damned gits can't be bothered to send out a Palfinger truck to pick up faulty implements... Skip trucks are cheap hires too, those'll yoink several tons up and drop it on the flat easy peasy. Not sure I trust that Claas Western place...

@john67654 Год назад

Still under Warranty. Enjoy video as always.

@barrymurray7635 Год назад

This time next year as del wud say ,there'll be a tele in the yard lol

@FarmerP Год назад

I somehow how doubt that, unfortunately.

@markh5433 Год назад

Why don’t you get a bracket made for the skid steer that has some chopped down link arms welded on and also a bracket for the top link, then you can lift the topper up safely

@kenyh6695 Год назад

You never did show what that gift was.

@adrianbew9641 Год назад

The Digger May Of Been The Other option with greater reach, not the easiest of implements to lift .

@FarmerP Год назад

Too heavy for a 2.7 tonne machine.

@marketmalc Год назад

Nice strap on work!! 🤣🤣😇

@scottharrison1663 Год назад

Hi farmer p did you see the bale thing to go on the front of your tractor I sent it through Facebook it was on market place mate

@FarmerP Год назад

I did, yes. 👍🏼

@DavidJohnson-rj8zu Год назад

They always used to say Gardeners or Allotment Holders were mothers of invention they also used to say the forma were tight fisted and used their own inventions.🧐😂

@stephenwade5994 Год назад

You need a telehandler. 😆

@FarmerP Год назад

Need one, no. Want one, for sure 😄

@casto- Год назад

LOLER who?!?🤷‍♂🤪 If she’s on and gone it’s all good 😁

@bobuncle8704 Год назад

If it weren’t for dodgy, I’d likely not get much done

@waynehammerton5698 Год назад

Isn't there a grease nipple on that end of the topper Ian to allow for lubrication otherwise that bearing is going to regularly fail

@daveschwerdtfeger7842 Год назад

👋😊

@phillipspratling9682 Год назад

would the digger not lift it just a idea

@paulf2529 Год назад

It would be too heavy for a 3 ton and really difficult to find the point of balance and get it high enough. At times I've lifted approx 3/4 full builders bags of balast with a 3 ton and to get them on or off from a trailer you need to use both the arm and then lift right up on the front blade and even then only clear the trailer bed by an inch (ifor williams trailer) Thing is with a bulk bag the weight is even. It would need a 5 ton or up digger lift it safely.

@grahamstubbs4962 Год назад

That's a brand new piece of kit. How the hell did the bearing go? A stern letter to the manufacturer might be in order.

@FarmerP Год назад

I’m putting it down to bad luck.

@grahamstubbs4962 Год назад

@@FarmerP Well a slightly miffed letter to the manufacturer. One wouldn't want to overstate the case.

@paulf2529 Год назад

@grahamstubbs4962 they are fairly cheaply made compared to a muthing or bomford but significantly cheaper. For flail mowers having looked at many I think bomford make the best .

@grahamstubbs4962 Год назад

@@paulf2529 Well, if it's cheaper there's always an argument for that. Not sure I'd want to leave it out in the rain, though.

@FarmerP Год назад

@@paulf2529 Oh they aren’t cheap Paul. I got this one at a great price compared to list and it was still over 6k

@marcinlabno7061 Год назад

👍🙂

@LazyJones Год назад

Comment for engagement

@greggroome2791 Год назад

👌🙏🙏🇨🇮🇨🇮👍👍

@harrie1976 Год назад

Well maybe the smart farmer makes a pallet for under the implement. Zo he can pick it up that way. Of course a metal pallet base. Maybe something his maybe sun inlaw can help the farmer with. A metal frame to put all implements on for transport. Just a idea. But standing under the front lift arms. Not so smart.and poor poor biskit.she had to walk. He made the star of the video walk and be sad.😊