10 Cool Inventions Anyone Can Print - The Best Models for Brand-New Printers

Подписаться 548 тыс.

Просмотров 1,1 млн

50% 1

These cool 3D prints don't need anything but filament and junk - perfect for beginners and really lazy experts!
Find all of these models on today's sponsor, Thangs! bit.ly/2SngasE
Unboxing a new 3D printer feels great... but then what? Whether you're a printing noob or a full-fledged 3D printing nerd, it's easy to find yourself all geared up with nothing to make. You don't have any ball bearings, heat-set inserts, Raspberry Pi's - all you have is a printer and some filament. What can you print RIGHT NOW?
I selected ten (or more) cool 3D printing projects that don't need anything but filament and your junk drawer. Whether you have a huge workshop or a kitchen table, you're ready to jump into these useful, hilarious, and impressive printable projects.
Thanks to 3DPrinty for sharing his awesome footage! Visit his channel at / 3dprinty
Models:
🏹 10 - Hand Crossbow by Arkoudaki: thangs.com/Arkoudaki/Hand-Cro...
🔑 9 - Wall Mount Key Hanger by Electrosync: thangs.com/electrosync/Wall-M...
⚙ 8 - Steampunk Light Switch by 3dprintingworld: thangs.com/3dprintingworld/St...
✏ 7 - Lathe Pencil Sharpener by H4I2: thangs.com/H4I2/Lathe-pencil-...
🐱‍👤 6 - Toy Nunchucks by Arrow Designs: thangs.com/Arrow-Designs/NUNC...
🗿🐙 5.1 - ROCKTOPUS by Pressprint: thangs.com/pressprint/ROCKTOP...
🗿🐙🤖 5.2 - Dr. Rocktopus by Plastic 3D: thangs.com/Plastic-3D/Support...
🗿🚗🤖 5.3 - Rocktimus Prime by Plastic 3D: thangs.com/Plastic-3D/ROCKtim...
🗿🦞 5.4 - Rock Lobster by nero3dp: thangs.com/nero3dp/The-Rock-L...
🗿🚀 5.5 - ROCKet by MandicReally: thangs.com/MandicReally/ROCKe...
🥒🗿 5.6 - Pickle Rock by ThinAir3D: thangs.com/ThinAir3D/Pickle-R...
🗿🗿🗿🗿⛰ 5.7 - Mount Rockmore by itsboyinSpace: thangs.com/itsboyinSpace/Moun...
🥦🗿 5.8 - bROCKOLI by Plastic 3D: thangs.com/Plastic-3D/bROCKOL...
🗿🗿 5.9 - THE ROCKNROCK by pressprint: thangs.com/pressprint/THE-ROC...
🗿🔫 4 - Grock 17 by rigim123: thangs.com/rigim123/Grock17-3...
📍 3 - Pin Screen Toy by 3DPrinty: thangs.com/3DPrinty/Pin-Scree...
🐉 2 - Snap Fit Scale Mail by roboticlay: thangs.com/roboticlay/Snap-Fi...
🍥 1 - Rolling Storage Box by 3DPrinty: thangs.com/3DPrinty/Rolling-S...
These models had cameos, too:
📦 Decorative Iris Box by Tristan_Inkjet: thangs.com/search/decorative%...
🎮 Pokedex Switch Game Case by Frasian: thangs.com/Frasian/Pokedex-Ni...
Timetable:
00:00 - INFINITE POWER!!
00:49 - Hand Crossbow
02:22 - Wall Mount Key Hanger
03:33 - Steampunk Light Switch
04:58 - Lathe Pencil Sharpener
05:46 - Toy Nunchucks
06:59 - Existential Dread
07:31 - Rock Around the Clock
08:16 - ???
09:18 - Pin Screen Toy
10:59 - Snap Fit Scale Mail
11:40 - Rolling Storage Box
13:07 - Thankies
13:38 - Patron Credits
"Nope" voice clip: Valve Inc.
Interference SFX: Partners in Rhyme
All other SFX: www.zapsplat.com
Glass break VFX: Videezy
Blood effects: ActionVFX

Наука

Опубликовано:

27 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 975

@Forgemaster86 2 года назад

The rolling storage box is an old market failure, the Roly kit came out in 1997. I do love the idea of a small one for tiny electronics, my mother bought one in the 90's and kept sewing supplies in it till my dad dropped it on a parquet floor. It died in the most spectacular fashion.

@StrangeLake 2 года назад

I picked up two Rolykits second hand recently and I've been using them to store my small electronics parts. They're really good for that ^^

@JWbrasser 2 года назад

@@StrangeLake My dad had 2 that he used for oddball screws and bolts and such

@b-roll4881 2 года назад

There was one back in 79,80. My step-dad had one. We did property management. It was great for the little things like nails and o-rings. It rolled right out to the end. But the end one was lid for the 2nd row. It lasted a long time. In fact I don't even know what happened to it. These designs brought back repairing stuff for someone

@quinbee_creates 2 года назад

I have a huge one that I keep my spools in (thread, not filament). I assume it's a knock-off version as I've never spotted a brand name on it and it works kinda...not...good...but well enough for the occasional sewing project. It has a sliding lock on the handle that keeps it very securely shut. Correction: the sliding lock is separate, not on the handle.

@GMCLabs 2 года назад

I got one. They suck, I store all the little parts I am least likely to ever use in it. You have to carefully unroll and roll it up or parts spill out or get caught in the hinges. Also, since it's not clear, it's easy to forget what is even in it. Those clear plastic comparmentized boxes or those things with all the little drawers are much better.

@3DJapan 2 года назад

As a 3D artist getting a 3D printer was my number 1 priority. I was blown away by the idea that I could create something digitally, then hold it in my hands a couple hours later.

@Drawfill Год назад

As someone who wants to get into 3d modeling and a total noob, any advice? Its a bit hard to know what to start on

@Drawfill Год назад

@@JeremyKnab will do thanks for the advice! :)

@cozymonk Год назад

You ever try working with Sculpey!? hah. I'm only kidding. I've had the dream of making something digitally and somehow magically bringing it into the physical world since I was a small child, playing the first 3D computer games in my dad's lap, long before 3D printers were a thing. It took me too long to finally get a 3D printer.

@Shinobubu 8 месяцев назад

yep that's the goal

@officialWWM 5 месяцев назад

A couple hours later? They must be small! 😂

@3DPrinty 2 года назад

So many great prints! The rusted light switch, the useful micro lathe, and even a skittles-infused pin screen... thanks for featuring so many designers (and also me)!

@TheSlowpC 2 года назад

Not just you … you twice! Love your work and great seeing your designs here today.

@KanielD 2 года назад

Awesome when I see two of my favorite channels together.

@fisherkey5979 Год назад

Dudhdhd

@werekill 2 года назад

The Rock trend is a ton of fun. I printed a Rock Eevee recently, and it was glorious! My girlfriend was only told that I was printing an Eevee that really "rocks", and her reaction to the final product was amazing.

@HowsItHappening 2 года назад

My younger brother and I love to watch wrasslin' together. So I told him I found a rock under a dock that he might like, but it wasn't a rock, it was...a rock lobster!!! I even had the song playing when he came over to get it. It was magnificent.

@logan398 Год назад

the rocktupus

@SlmdDm-cy5xw 5 месяцев назад

There’s even more on thingiverse I have a whole collection of them and there’s like hundreds 🌚

@UncleJessy 2 года назад

Now that is some fine printing projects! Imma need a rock 🦞

@Ima_Tron 2 года назад

No I don't actually. Also, thats one "m" too many.

@critter42 2 года назад

My wife and I are 80s kids and wresting fans, so the punny intersection of the two in the Rock Lobster model, plus the 3d printed factor should successfully earn a full blown eyeroll, head shake and a "you're an idiot" when I put this on her desk LOL

@UncleJessy 2 года назад

@@critter42 wondering how many get the Rocklobster reference 😂🤣

@critter42 2 года назад

@@UncleJessy The look on her face when she put two & two together was TOTALLY worth it 🤣🤣🤣

@mechbest8685 2 года назад

I think he needs some Jesse pla

@DamnCyrus 2 года назад

I recently started printing Benchys en masse. I don't know why, I have such an urge to paint a collection of them. I have printed so many things with my two printers so this is great to see for all the noobs coming fresh off of the holidays. That Grock joke actually had me exhale too hard, thank you

@archie8701 2 года назад

I had the same boat problem I recently bought a filament sample pack for just boats

@devinholland2189 2 года назад

I did rubber ducks.

@bleach_drink_me 2 года назад

Been printing a year or maybe 2 now and I still watched. I was lost at what to do when I first started. I spent about 6 months printing whatever I found on the stl sites that I found useful or cool. Since I have found 3d printing to be useful for making things you either can't find or you don't like the current design. I have made and printed a lot of things and it never gets old seeing something you designed come to life and work.

@LuxurioMusic 2 года назад

That rolling storage box just jogged my memory, I had one when I was a kid except it rolled all the way in like a spiral. As far as my bad memory lets me recall, it was kinda finnicky to use but it worked. Good for holding little things.

@b-roll4881 2 года назад

Me too 😆

@miroreo 2 года назад

I’ve had my printer for two years now and found more things to print here! Hell yeah!

@masterkief6337 2 года назад

Recently found your channel and I just gotta say I absolutely love your script writing. Your comedy is great and understated and the little alliteration jokes always get me. I'm a fellow Dever-ette as well, if I ever see ya at Microcenter I'll say hi :)

@FlashDrive356 2 года назад

Had my printer for a couple years now, never seen these, thanks for the print ideas Zack!

@ribeets 7 месяцев назад

Love how honest you are about showing shots of working prints from the creator!

@Althemor 2 года назад

My first project (I'm talking stuff I made in Fusion 360 for the printer I got a couple weeks ago) was curtain gliders, because the curtains my sister didn't need anymore had glider bits that didn't fit the tracks in my flat. Though while replacing the glider bits I noticed that the ... er, hanger bits? ..., well, quite a few of them had damaged hooks, so in a few places the curtains have detached from the gliders. Now I might need to remake the hook thingies too. Or I'll try to replace my broken bike lamp enclosure.

@MakerDIY 2 года назад

Coming from someone who’s a complete noob in video making, the amount of time put into each of your videos must be tremendous. Been binge watching for hours and just subscribed. Thanks so much for the amazing content, great ideas and new extensions to my vocabulary. I appreciate you!

@codegavran Год назад

Coming from someone who isn't... nope.

@dirtrider88 11 дней назад

10:21 yea but your humor is top notch above anyone elses making videos about 3d printers. i dont even own a 3d printer and i have watched A LOT of your videos in the last month. your one of my favorite channels.

@odirex 2 года назад

I'm so glad someone resurrected rolykit storage. I need it for my D&D minis.

@EnnesArms 2 года назад

I actually just printed electrosync’s buckle! Didn’t even realize it can be used like that!

@csp6 2 года назад

Hint on the tall narrow prints - very wide brim. I'm talkin' 30+ wide, but basically make it so the base is at least 1/3 to 1/2 or even more as wide as the model, so it has a much higher resistance to failure late in the print. Also make sure the squish on the first layer is decent so it adheres really well and the bed temp is on the higher end of the spread.

@medivalone Год назад

I've made it through some tall spires such as a trophy where a brim would have not helped as the base was already printed below. I added some painted on supports and the tree supports braced the spires so they didn't flop back and forth too much

@brians.2259 2 года назад

You are literally the only creator I’ve subscribed to whose every video I’ve watched that I will go the one extra step and like the video. You sir are epic! Keep it up!

@johnchristopherrobert1839 2 года назад

Your content is always a great reset for me. Thank you 🙏

@Vez3D 2 года назад

You are the most entertaining dude ever !! I love watching your vids. Keep them coming. Cheers mate

@weisnowhere 2 года назад

So glad you featured 3dprinty!! He has absolutely great content and not enough recognition!!

@MichaelHonsinger 2 года назад

Hey Zack that Rock Salad was Rock Solid! I was buffeted by laughs of the out-loud variety. I always appreciate your sense of humor and Scary Sharp Wit I've seen quite a few of your videos and .this gets my vote for funniest that I've seen so far. Thanks I needed that!

@GoodTato 2 года назад

I have a SLA printer with a tiny print area (as SLA often has), and I'm glad to see most of these are fine for tiny areas like mine! Definitely going to print many rocks

@r8cobra 2 года назад

Resinhuffer

@3DMusketeers 2 года назад

Love the video Zack! Been there with fails too! OMG the America School system! You have the best puns and jokes in your videos sir! Love those prints!

@TanyaHakala 2 года назад

That light switch would be great for service dogs! Mine hates to turn on and off regular light switches because they are so tiny and fiddly for him.

@PatrickGunderson 2 года назад

Dude, your writing and delivery are on point. Thank you.

@jaysonbunnell8097 2 года назад

I love this. Happy 2022 zack!!!

@HuFlungDung2 2 года назад

I've wondered about using magnets as clamps on those tallish prints that are prone to getting knocked loose (pause the print after it gets tall enough for the nozzle to clear the magnet clamps). If using a spring steel PEI coated sheet, there should be something to clamp to, but I'm not sure how a magnet on top will interact with the magnet on the table sheet.

@GMCLabs 2 года назад

That rolly thing you used to be able to buy. It was an "as seen on tv" thing called the rolly kit. I have one. Its pretty cool, but is kinda a pain to use, since you need to carefully unroll the entire thing if ya need a part in the last container. Also better remember every single item you stored in it, or you end up wasting a bunch of time looking for it.

@SeaBass80 Год назад

That reading of the names at end made this a so much better find!! Love it! you got a follower.

@jamtea388 2 года назад

Thanks for these recommendations!

@randomentity0191 2 года назад

I sure as heck would print those light switches if they were the same style here over the pond. But some of them certainly will go on my list of stuff to print at some point in the future.

@tikiman9728 2 года назад

Love the videos keep the good work up

@ericledford6 5 месяцев назад

wow haven't seen the Enlightened logo in years, cool keychain.

@Brightfire8 4 месяца назад

I was thinking the same thing

@Blustride Год назад

7:32 is such a random reference for a 3D printing video and I’m here for it.

@breakinginferno6774 2 года назад

PSA for newbies! Almost none of these are viable on resin printers. Printing mechanisms on resin is completely different due to the difference in material properties. Print-in-place *can* work with heavy custom supports, but if it's gotta be springy, durable, or have tight tolerances, use an FDM printer.

@HasanUmutlu Год назад

Hi Zack, i really appreciate your wide range videos and learn a lot from them, so go ahead with the good work! I saw in the beginning of the video that you have an Anycubic printer. I bought a Anycubic Kobra Go and been experimenting and watching lots of videos to finally get the print quality i am looking for. Can i ask which slicer you use and if you used the pre defined configurations which come with the printer for the slicing software or if you have tweaked the configuration. I struggle espacially with tolerance issues and the fact that even if the print starts well at some point the first layer somehow melts together and therefore functional parts don't work anymore and this is really frustrating because i tried a lot and wasted already a lot filament. Hope you can give me some advise.

@theslvrbullt 2 года назад

Ok, I have seen the rolling storage boxes before way back in High School, but they will always be awesome. I can't seem to find them anywhere, but I'm deffo gonna print those suckers to finally properly organize my electronics mess lol. Thanks for the ideas!

@robertsmith8472 2 года назад

I've had mine for about a year and I'm finally joining the Sword club. I modeled the Master Sword and the Gladius from Astral Chain and plan to print them both at 1:1. I'm really excited

@Four-sc6gj 2 года назад

My favorite key hanger isn't printed at all, but is just a standard ethernet biscuit jack mounted to the wall. I made a few loopbacks that double as keychains and they plug right in (and the loopbacks are functional and handy to have in my profession)

@Hawk7886 2 года назад

I love this idea. A dead network switch would be an easy way to keep a bunch of them together.

@Four-sc6gj 2 года назад

@@Hawk7886 I have an old hub on the wall at work for that purpose. Plus the hub can be handy in a pinch for easy port replication for wireshark and whatnot.

@Anarcho-harambeism Год назад

me who actually 3d printed guns

@Atlas.X9X 2 года назад

You are endlessly amusing.... I often find myself laughing out loud while watching your videos. Thanks for the time that you put into these videos....

@Jlrockcrawler1973 2 года назад

Dude keep up the awesome videos. Thank you for being so informative and for the great humor

@asm2750 2 года назад

Is there a list of the filaments you used? I love all the colors.

@robertgcode965 2 года назад

Everyone: "We must stop polluting the earth with plastic!" Also everyone: "Haha useless 3d printed plastic widgets go brrrrrrrr."

@holycaketree 2 года назад

PLA is made out of plants and is bio degradable in industrial recycling

@ComgrowOfficial 2 года назад

Love your works! So cool and so funny😍😍😍

@squeeh 2 года назад

Thank you, not a first time printer but I've been stumped for Months on what to print next. I just wanted some Ideas and this is perfect. Gonna print the keys holder wall mount hanger multi-use - THANK YOU

@ablebaker8664 2 года назад

Something that really helps with prints that tend to lose adhesion is Aquanet hair spray. It goes on as a fine mist so you get a nice thin adhesive layer but it's considerably more aggressive than kiddie glue stick. Cleans up with water when you need to have it gone. I print much tougher stuff than those nunchuku and since I started using it, I haven't had one spaghetti failure.

@NyeMechworks 2 года назад

Or masking tape if you dont have a heated print bed.

@cavinrauch 2 года назад

3D Printy is massively underrated. Glad you had a shout out to his channel

@JoshuaLudy Год назад

Your content is awesome i really enjoy it thanks.

@VernePomraning 10 месяцев назад

You earned my subscribing. I love your humor and content. Good job jobe

@electrosync 2 года назад

Sorry about that generic-arse title ;) Great vid!

@Timb0515 2 года назад

Lol “I’m a cocktail guy” haha me too and now I’ve got to try that peanut butter beer 🤣

@thorstenceuleneer8361 2 года назад

Thats cool I love the cross bow and key holder.

@yassersabsabi4534 2 года назад

Watching this video currently waiting for my first 3d printer to arrive (ender 3) . Im so hyped!

@WolfRose11 2 года назад

The Pin toy at 9:35 was something that I always wanted to have, now I can make my own. Though I have to fix my elephants foot problem first or raft all of them.

@lloydsicornite6454 2 года назад

I have just got my first 3d printer this video fits very well

@gregruckstuhl4268 Год назад

New subscriber her so far I love the videos and the commentary kicks are hilarious 🤣 definitely got me hooked in 🤩😎

@mattmace10 2 года назад

First video in a long time ive loved and subscribed too. thanks for the fun video

@CommanderWiggins 2 года назад

I do not own a 3D printer, nor am I in the market to get one, but the algorithm recommended this channel, and the comedy, editing, and content are so good that I had to stay. Even the Patreon names are a delight.

@ZackFreedman 2 года назад

Thank you! I put a lot of work into making my videos fun to watch, even to folks who'd never use the material. That's how we get out of our comfort zones, right?

@rorylaubscher3208 9 месяцев назад

Just discovered. Just subscribed. Loving the content and presentation.

@Lurch-11 Год назад

This is one of my favorite videos I've ever watched

@BOTGRINDER 2 года назад

i always wanted one of them rolly things back in the day, guess ill just print one since its the future.

@johnrisher1441 2 года назад

The rollable parts tray is awesome I have an antique tackle box that was designed this way.

@brianwaterman8185 5 месяцев назад

Ah the good ol Discovery Zone. Love the reference. New to printing. Thanks for all the content to gravitate to.

@Darkmaster5629 2 года назад

Thats the reason i subscribed. Love your vids.

@howtoguy17 2 года назад

I loved the Shoop Da Whoop from the laser collection. Dominic Fera really left a mark on us all

@snapap690 10 месяцев назад

You're freaking AWESOME dude. Glad I came across your page.

@ZJ7909 Год назад

Zack this Zack as well and the nunchucks part had me laughing so hard. I’m now subscribed.

@aktudors 5 месяцев назад

great ideas! we will be trying these once we get our printer dialed in. :)

@purpletrauma Год назад

May try a couple of these. I've enjoyed getting into 3D printing, despite the frustration. It worked well enough out of box, but once I wanted to upgrade, whooooo boy. Wish I knew ahead that this hobby has a way of demanding you know every bit of hardware in and out before you can get it right. Deconstructed and reconstructed most parts of it by now, just printed a new filament roller with 608 bearings because the Ender 3 one was getting lots of friction, and learned I have no idea how tight the timing belts need, and that they were super over-tightened earlier. Still debating whether I should replace the stock ones with some standard G2 roll.. Learned that trying to print a Pokeball; the Z axis was fine because I kept finangling with that every issue, and overhang tests reached 80 before they got rough, but CURVED overhang, and suddenly the surfaces seem rough and over-extruded.. My point is, I've dialed the crap in about all of this, currently contending with PLA wanting to curl like mad, and I just want to actually make something mechanically complex and cool now, so I'm interested in this video of interesting prints that have been done and tested already.. maybe I'll re-try the TPU action figure again; the joints weren't right before and the limbs refused to stay on last attempt.. maybe I should replace those timing belts with non-stock ones.. hrm..

@SnoopDoggyDoge 2 года назад

love seeing remnants of UNO like Ness on your phone, amazing vid as always Zack!

@Heeby-Jeebies 2 года назад

A damned fine video. And I just got my first machine, too! So this is timely for me!

@Brain_pocketer 2 года назад

Happy to see another video, Zach.

@zanie9 2 года назад

you inspired me to get a 3D printer and I am forever grateful!

@TheBigMan1019 2 года назад

Love your vids, keep it up!

@justinbanks2380 Год назад

New to the channel, but loving it. I felt the cursing at the print deciding to fail so close to the end, soooooo much. I just 'upgraded' my printer to have auto leveling and have had more issues than when I had to manually level it. Ugh. If I hadn't swapped boards, beds and firmware, I might just make it stock again... Still might. Lol Ramble aside, thank you for the commissarating

@mark4jr 3 месяца назад

Thanks!

@3DPrintSOS 2 года назад

Love the vids, but the end is ALWAYS the highlight for me. haha

@TheRonin6 2 года назад

Zack...your impression of me on Christmas morning was SPOT ON! Just started watching your videos, and they are fantastic. Happy holidays, and keep up the good work!

@andysmith9243 Год назад

I love printing The Rock stuff lol!

@microgames10000 2 года назад

I bought the rolling storage box from a store (not printed) and it is amazing

@scottwilliams895 2 года назад

Brilliant video!!

@StevenSSmith 2 года назад

my grandma had bought that roll up storage box back in the 90's. It was called the rolykit

@direghostman 2 года назад

got to say, you really nailed the take on the snap fit scale mail section.

@wilddarion5083 2 года назад

that Rock gun set up is SOLID GOLD

@ivikhenry2424 2 года назад

There was a Discovery Zone in Anchorage Alaska. Fun times there.

@Podunk82 2 года назад

WOOT ENLIGHTENED REPRESENT!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! You sir now have my Subscription!!!

@kingdevilz100 2 года назад

loved the cameo Decorative Iris Box i printing one righet now.

@Bianchi77 2 года назад

Keep it up, thank you for sharing :)

@MyBrothersMario 2 года назад

the last one is really cool, but definitely mass producible, I got a bunch of toy cars from one of my mom's clients as a kid, and a lot of them were stored in two containers that rolled up like that, the storage containers went all the way to the center and used two fabric straps glued along the outside to give it the flexibility. Sadly I lost them years ago.

@joshrothchild8855 2 года назад

Good info, warnings about hard prints, and light hearted jokes. Great video

@ez5970 Год назад

Just found your channel and you are how my favorite RU-vidr!!

@HicksBoson 2 года назад

Not naming the gun Dwayne the Glock Johnson was a great opportunity missed.

@michaelsanchez8519 5 месяцев назад

I gotta admit. I was not expecting this level of entertainment from this kind of video. Dude, you are very clever, funny, and a showman. Subbed. Your “spaghetti” and The Rock bits… Gold 🤌

@sethviloria3602 2 года назад

pb&j! i'm sold! subscribed.

@chrisbednar3578 8 месяцев назад

I know this video is old but seeing that Enlightened symbol on the key buckle wall organizer thing really brings me back... glad to see we were on the same side 😉