10 Unbelievable Engines from the Performance Racing Industry Show (2019)

Подписаться 164 тыс.

Просмотров 514 тыс.

50% 1

Just got back from the Performance Racing Industry trade show and thought I'd share the 10 best race engines I saw there (in no particular order). The place was stuffed to the rafters with custom billet engines making thousands of horsepower on diesel, ethanol and race gas, and it was a blast to go through it all. There is something for everyone here with a V16 marine engine, supercharged drag race engines pushing thousands of horsepower, a new Sprint Car race engine from Ford and Tony Stewart Racing, Tractor pulling engines and even a two cylinder supercharged engine from Noonan Race Engineering unlike anything you've ever seen before.
We're constantly uploading great new videos. Please subscribe so you won't miss out!
ru-vid.com_c...
MORE INTERNET GOODNESS:
Website: www.horsepowermonster.com/
Facebook: / horsepowermonster
Instagram: / horsepowermonster

Авто/Мото

Опубликовано:

22 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 405

@shakethaspot6301 4 года назад

The two cylinder 1000hp motor was incredible. The flat 4 also. I love engineering like that. Those engines could fit In anything! 🔰

@brentiaconelli6484 4 года назад

That's far from small dude! The v twin from supercharger to flywheel is longer than 2 Ls blocks

@BastardX13 3 года назад

So now the V16 LS swap Duesenburg owners have been howling for is finally available! Great job everbody.

@Crazystuffyousee 4 года назад

This was one of the BEST and most informative videos I've seen. No clickbait and just straight to the point... Definitely subscribed.

@TheHorsepowerMonster 4 года назад

Thanks!

@22ron81 4 года назад

Yep i subbed

@TheHorsepowerMonster 4 года назад

@@22ron81 Thanks!

@JDL16 4 года назад

100% agree

@thegiantgaming7592 4 года назад

Am i the only one wanting to hear what that 1000hp V-twin is going to sound like????

@remkojerphanion4686 4 года назад

Imagine that engine in a Harley!

@Brock_Landers 4 года назад

That thing has got to sound so wicked!

@Just1Spark 4 года назад

watch?v=zLY7QRPksaQ Sorry, I think this is the flat 4....

@Astra13_Joe 4 года назад

Just1Spark Well the Link doesn’t even work so it’s fine.

@groomlake51 4 года назад

TheGiant Gaming you all are wrong🤣 it’s just 2 cylinders worth of the Noonan 4.900 bore center outlaw hemi. It’s a dyno mule to try different combinations at a lower cost.

@MajesticDemonLord 4 года назад

That tractor pulling engine that was Chrome/Steel/Aluminium was absolutely GORGEOUS.

@richard1835 4 года назад

You would think that in your dreams only you would see engines like these, but these monsters are real and there are some serious engine builders out there doing it. Great Video. Thumbs up.

@TheHorsepowerMonster 4 года назад

Thanks a lot!

@jkheslekrants 4 года назад

Seriously Brilliant content! Thank you

@Brock_Landers 4 года назад

Wow man, I don't even know where to start...I have ALWAYS been into Sonny's engines, but that flat four as well as the V-twin are both really cool. These engines are just mind blowing. Thanks for taking the time to post them all for us!

@mordante01 4 года назад

That falt 4 was by far the most interesting engine of the video.

@lukebrennan5780 Год назад

@@unbekannterhummer5135 as someone who has built hot VW 2175 flat fours, it ain't the same :-) Drooling over it!!!!

@SquillyMon 4 года назад

It was never hard to go fast or have big power...when you have DEEP POCKETS... and youre definitely going to need them to play here.

@ronwhittaker6317 Год назад

That's how its always been i asked an old mechanic when i was a kid how fast will it go and he asked me how much money do you want to spend i soon caught on.

@lukebrennan5780 Год назад

That flat four was BRILLIANT!

@peturstefansson 4 года назад

Thanks for the video. It's incredible how the engineers can push out a massive amount of horsepower of their products.

@ecrusch 4 года назад

Every one of those is a masterpiece!

@boston7704 3 года назад

With all this insane billet and CNC machining, i would love 2020s Merlin or Griffon. One can dream...

@chrisjones1798 4 года назад

That's the holy grail of engines

@ztwntyn8 4 года назад

Great stuff/vid. Now I Jones to hear/see them run!

@burtmoore2101 4 года назад

Excellent choice's, loved the content, keeps an old gearhead like me in the know.👍 Thanks to all who made it!

@TheHorsepowerMonster 4 года назад

Thanks for the kind words! And thanks for watching!

@Luda_chris 4 года назад

That flat 4 is ridiculous. Super compact, super light, with a goal of 2000 hp! That's ridiculous! And it'll literally fit in anything.

@rustedratchetgarage6788 4 года назад

Sema =bondo liftblocks and woodscrews PRIS= billet blocks and titanium hardware and lots of boost

@working2bselfsufficient724 3 года назад

Sema sucks unless your a body designer really. Everything is so fake alot doesnt work never was built to etc. Cant stand all the fakeness.

@scottyskydog 2 года назад

Excellent video! Very informative! Ty

@metalstorm91291 4 года назад

Hold up. That Sonny's Racing engine makes about 153 HP/liter naturally aspirated. That's incredibly impressive. Also, If the Jesel engine lives up to it's hype, the current estimate is that it will produce 1325 HP with a 12000 RPM redline. That's 189 HP/liter, which is insane! Can't wait to hear what that sounds like.

@rolux4853 11 месяцев назад

I’m very confused, that isn’t that much? Mercedes builds a stock mass produced engine with 2.0 liters and 4 cylinders. It makes over 400hp, of course it’s turbocharged. But much more efficient and more power than the engines you praise. And it runs 150000 miles without an rebuild.

@metalstorm91291 11 месяцев назад

@@rolux4853 what's impressive about these engines is that they make that much power per liter WITHOUT a turbo or supercharger. I think the highest naturally aspirated output per liter in a production car is the Pagani Huayra R with 139 hp/liter. I believe the Honda S2000 still holds the record for more normal production cars at 124 hp/liter. Also please check the age of the comment before you reply to it.

@kubbie1969 4 года назад

Blower on the diesel is a PSI Screw not a Roots

@teddyjones8027 2 года назад

Fantastic bad azz content, great video Thank you for sharing. Please keep em coming, everyone keep yourselves and love ones safe and healthy and remember to SMILE.

@suabroboro 4 года назад

Awesome man. Really love your job.😀

@TheHorsepowerMonster 4 года назад

Thanks very much!

@johnsmith-qz4bv 4 года назад

that was some nice engines and engineering

@Ljthe_B.A.B.P 2 года назад

We need more coverage of the PRI Show. Love the video format I've watched this video at least 60 times since it came out. More Pri coverage please 🙏🏾

@fastmonaro05 4 года назад

I LOVE these engines!!!!!!!! Gday from Australia

@psiwog 4 года назад

Gday from melbourne 😁

@fastmonaro05 4 года назад

@@psiwog There is always one

@sicks6six 4 года назад

when power becomes art, this is what you get,

@Platypus_Warrior 4 года назад

5:50 You got that right HAHAHAHA !

@suttonsplash14 4 года назад

Cool! So much billet!!

@dangerousfreedom4965 4 года назад

Amazing!

@speedcrusader3779 4 года назад

impressive engines makes life exciting

@generalsandnapoleon 4 года назад

Great stuff, Jeff!

@TheHorsepowerMonster 4 года назад

Thanks! Much appreciated!

@andykerr3803 Год назад

Looking forward to an update... Time flies!

@savneetsinghrairai6823 4 года назад

Oh it's really special never heard on v2 1000hp engine...love to hear this massively supercharged beast ...well it's easy to overhaul with just two massive clynders

@Brock_Landers 4 года назад

Merry Christmas buddy!

@matthewguilford9340 3 года назад

It's about time someone made a high performance ej2.5 subbie motor

@elpelon10501 4 года назад

This engines look really bad ass !!!

@dylanmccanlies6789 4 года назад

Things of beauty.

@vmaxes 4 года назад

Great video!

@TheHorsepowerMonster 4 года назад

Hey Thanks!

@dubsydubs5234 4 года назад

Good video, clean and precise, much like those engines.

@TheHorsepowerMonster 4 года назад

Thanks very much. And thanks for watching!

@dubsydubs5234 4 года назад

@@TheHorsepowerMonster I subbed too, looking forward to your next video.

@prachya007 2 года назад

it’s the thing of beauty!

@brandonhewitt2386 4 года назад

I'd like to see that flat 4 in a sleeper VW Bug! That would be awesome!

@savneetsinghrairai6823 4 года назад

Ofcourse but with engine everything else needs to be upgraded otherwise bug will be destroyed in seconds....lol🤣🤣👍merry X mass

@gothicpagan.666 4 года назад

Looked super wide, to accomadate what must be a big old crank stroke

@MrSamblomer 4 года назад

we have a similar blown engine in a front engined Karmann Ghia

@cocosloan3748 4 года назад

I think that engine is best out-there ! It has great future in any car you put it in!

@hammatime94 4 года назад

That idiot asking dumb questions needs to understand that Subaru and Porsche also make horizontally opposed engines

@savneetsinghrairai6823 4 года назад

Wow this is like a X mass present from Santa.....so clean precise engineering Marvels of modern world Wish I had it all ....anyway thanks for sharing master pieces...Merry X mass

@TheSteve1175 4 года назад

Hey, my first time to see your channel. I liked and subed. 😁

@TheHorsepowerMonster 4 года назад

Thanks so much!

@Sharkey_t 4 года назад

around 20 years ago someone had built what we today would call a crude version of that v-twin. it started with a keith black top fuel block, cut into pieces and welded back together as a 2 cylinder. brad anderson heads got the same treatment. iirc it ran a 6-71 blower, and it did run on nitro, and made around 1200hp. it was built for a land speed car. i figured this v-twin was either a display piece, or something for another land speed car. interesting to see its actually a dyno mule.

@joeestes8114 4 года назад

Awesome!

@whalman511 3 года назад

Damn 1000 from 2 cylinders that’s madness

@magicelkiller 4 года назад

Very informative video i subbed

@TheHorsepowerMonster 4 года назад

Thanks a lot, and thanks for subscribing! I hope to have a lot of cool stuff coming up in the very near future. Next up if all goes as planned with be a big-inch Hemi with a 671 blower.

@poucxs9246 4 года назад

they already did a v16 in a car in 1932, auto union type d > seeing a remake of that one would be mental !

@clintonhenwood960 4 года назад

Thanks

@suttonsplash14 3 года назад

that first engine is sick!

@drobusto13 3 года назад

I NEED TO HEAR THESE MOTORS!

@jamest.5001 4 года назад

Imagine that 2cylinder on a Harley drag bike! Or even a 4cylinder version!

@RalphSampson... 4 года назад

That was my first thought, too.

@jakessmallengines 4 года назад

Headers to close to coil packs and plug wires .. Nice motor !

@deborahchesser7375 3 года назад

That V16 is a beast. Kind of like a DD 12V92

@K-Effect 4 года назад

I’ll take 1 twin blown V16’s please. Then I’ll put it in the bed of my 1970 long bed Chevy pick up so it’s mid engine-ish. The motors probably worth 6 times with my truck is. I think that’s a good investment😂! Smiles are priceless. Also have a Merry Christmas or whatever you celebrate people.

@ViewThis. 4 года назад

V16 CHEVY = Can't Have Enough Vee Yates

@w.maximilliandejohnsonbour725 4 года назад

Nice...!!!!!.

@anzachawkins2697 4 года назад

Nice concept motoring

@Perry-ck1hv 4 года назад

I want the big V-Twin Harley bagger build 🤔 Man does this thing Pull😎

@richrinehart1083 Год назад

There are some incredibly smart people out there with some serious cnc machining skills. I showed my brother who is a killer cnc machinist and he was pretty impressed. We have always wanted to build our own cars since we used to build plastic models together. All I need is around 30 million in hundreds and a fire proof credit card because I would be cookin' that thing buying parts....... I want to create my own suspension done with computer controlled hydraulic pumps at crazy pressure levels to react fast enough to control the transfer of weight front to back and side to side..... could be done..... just need some cash.

@davegriffith32 3 года назад

Awesome video! Was that Cleveland Brown at the end? 😂

@fybdrilltime3166 2 года назад

The second engine looked beastly 😈

@65Coasty 4 года назад

Great vid. Oh and Noonan is an Australian company.

@mervynmontague1811 4 года назад

Very interesting

@erat91 4 года назад

That 16 cylinder engine NEEDS to be in a Hydroplane.

@rustedratchetgarage6788 4 года назад

My buddy has a airboat he would love it but im showing him the 1000hp vtwin and the 3000hp flat 4 first due to weight vs hp

@Chris-yy7qc 4 года назад

That thing needs to be in my car. Id sit on the backseats then, so theres enought space for it. Fine for me. :D

@tomhamilton9140 4 года назад

Thank you for the new ford sprint car engine. Would loved to see thee 351 MMR 4000 HP Ford Mod motor on display.

@brendo7363 3 года назад

1:42 Love the exhaust manifolds just millimetres from the ignition leads and coils.

@antonyaiken Год назад

That's the architectural limits of a 1920s engine design. 99% of other manufacturers had realised 4v heads and OHC with spark in the centre of the chamber and true crossflow designs were superior almost 60 years ago. America will catch up. Eventually.

@WVdavidB 4 года назад

I missed the V4 2.0L V4 engine made from 4 Honda CR500 cylinders. Where was that at? Sigh we 2 stroke lovers can only dream!

@RadDadisRad 3 года назад

I want the Tony Stewart Racing 410. Heard it’s the development piece for Fords return to backing racing leagues. Made in Windsor Ontario.

@Mercmad 4 года назад

The two cylinder test engine is pretty interesting . Here in Australia I knew a guy who built an engine of similar size by cutting the front two cylinders off a Rolls Royce merlin V12 . then ran it in a motor bike.

@TheHorsepowerMonster 4 года назад

I would love to see that! I love the weird things that smart gearheads come up with. Thanks for watching!

@Wabeeninc 4 года назад

Need some modern Merlin engines

@shawnriddle3018 4 года назад

WOW!!!

@StavTech 4 года назад

Awesome. I need to go to PRI

@dadfood3504 4 года назад

I'm amazed at how much people are putting into diesel race engines these days.

@dinadaughtry8993 Год назад

No I would love to hear it to be awesome on a mini rail!

@jsullivan9238 2 года назад

1000 HP from a twin! Hellsakes, I was superhappy to wring out 102 HP from my 1100 CC 92 Virago engine...

@christopherdean1326 4 года назад

I want one of those V16s and a '32 hiboy to put it in.

@johndavey72 4 года назад

I think that when Rolls Royce were developing the Merlin and "R" engines they ran single cylinder prototypes to see the potential horsepower figures. So to see the "twin" is unusual but not a first. Of course aeroengine manufacturers were pioneers in supercharging and turbocharging .

@watsisbuttndo829 4 года назад

I dont know where it is today but in the 80,s a guy named Lucky Kaiser made a merlin v twin motorcycle from a crash damaged merlin.

@lukebrennan5780 Год назад

Royce's made "star" engines to test concepts for their 24 cyl X engines and many single cylinder test engines, one of which led to the infamous 'ramp head' in the very first Merlins, which failed badly when scaled to the full size V12.

@bongosock 3 года назад

I love the idea of the V16/modular LS approach, but you still end up with a looong crank and the issues that entails

@breakawaymotorsports 4 года назад

Lord..HP porn!! Now back to my low budget reality..HP is just a crutch anyways..but we all want it!! Minus the blower..that twin would look mighty fine in my old Shovelhead..

@MrLaTEchno 4 года назад

14:30 ... dude that's Moto Guzzzzz I had one in 1985 way back in time already .....lol [so cool this one ! ]

@mr.blonde1709 4 года назад

get ya wallets out, boys.. thanks for the video. love the channel, buddy.

@TheHorsepowerMonster 4 года назад

Hey thanks! And thanks for watching!

@raymiles691 3 года назад

Steller Entertaining Another Planet🚀😯?!

@Just1Spark 4 года назад

Its only a matter of time before someone builds an allspark!

@trevoncowen9198 4 года назад

Just1Spark Lmaooo 🤣🤣🤣🤣

@BillyTheSKID 4 года назад

I think they make 500hp on single cylinder yamaha raptors in brazil this is impressive none the less

@ninablatchley842 4 года назад

That 2 cylinder would be cool in a SXS or Crazy

@davidelliott5843 3 года назад

Two stroke diesels are awesome and very clean. A radial four (X) has near zero torque vibration and no mechanical vibration. A twin row is even smoother. All four rods are carried on one crank pin so simple to make. Intake are is blown through reed valves. Exhaust has a variable port height to keep the torque high across the range.

@boltonky 4 года назад

There is some crazy machines coming out as they fight to keep petrol etc in the game, what concerns me is what use 98% of high performance engines have in the modern day.... I love HP but there is no use for it except on the track or closed courses until people are taught to drive without technology to save them. Great video BTW :)

@1STGeneral 4 года назад

Is the Prius channel down again ?

@Demidar 3 года назад

wonder what the torque figure is on that nitro diesel with 2k horses, probarbly revs to like 7-8 k ?

@davidbright9370 4 года назад

How do they keep the intake temps down on Tom Baileys Camaro with the air filters sitting millimeters away from the exhaust headers?

@justinmaxwell1608 3 года назад

That flat four would keep the old tin top from holding up traffic.

@sprintcarguy03 4 года назад

I love sprintcar racing

@mechanic7430 4 года назад

Imagine all This tech and billet bits With ohc vct and maybe an in-line 6 version phoahhh

@kennethwallace4338 4 года назад

5:20 reminds me of the real life Rodger Dodger when this guy strapped a train blower to a engine flip the car on it's side leaving the starting line.

@ViewThis. 4 года назад

Is there an Emoji to express my drooling?

@jamest.5001 4 года назад

What's the lines going in between the exhaust ports above the sparkplugs on the Ford sprintcar engine? With the lines going over the valve cover? Direct injection?

@TheHorsepowerMonster 4 года назад

Yes, I'm pretty certain that's the mechanical fuel injection.

@bigredc222 4 года назад

Do those billet blocks need piston sleeves? Good video Thanks

@TheHorsepowerMonster 4 года назад

Usually, yes. The billet blocks are cut from aluminum and then have iron sleeves pressed in place. Thanks for watching.

@bigredc222 4 года назад

@@TheHorsepowerMonster Thanks

@johncunningham4820 3 года назад

Damn . That final V-2 will have the Morgan Owners lining up , cash in hand . Citroen 2CV owners as well I suspect . LOL .

@trevoncowen9198 4 года назад

I want to put one of the na drag engines in my daily car lol or that sunnies truck pulling engine

@garry3013 Год назад

Back in the day at the time of Daytona qualifying. They said the cranks were timed 180° past TDC. With different firing order. I thought they were using a flat plane crank some how. They were timed like the Rodeck engines. Giving them a completely different sound. You could here the difference with pull trucks using them. Just something I remember about those engines.