100 Series Land Cruiser CV Axle Replacement| Clunk Fixed!!!

Подписаться 2,6 тыс.

Просмотров 10 тыс.

50% 1

In this episode of TheFadShow I work on replacing the CV axles on my 100 series Toyota Land Cruiser. Finally I have fixed the drivetrain clunk on my 100 series. I also remove my front driveshaft clean it and re-pack it with fresh grease.
I.G.~ dom.ferr.90

Авто/Мото

Опубликовано:

12 янв 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 21

@TheElectrcChickn 3 месяца назад

Thanks! I’ve watched a few of your write ups fervently. Got the cv axles done today. My only advise for fellow diyers is to take out the axle opposite the flange side first and install opposite how you removed it. Also if you’re working alone reattach the ball joint and it should get your axle pretty level and if you’re lucky a few taps and you’re in. Finally I don’t know if I’m courageous enough but I have a steering rack that is in its final throes of life. Thanks again and to anyone else watching you can do it! Buy a case of your favorite beer! Keep making videos.

@thefadshow 3 месяца назад

Thank you very much. Glad to hear that the videos may have helped you. There’s a lot of work behind the scenes on making the videos too, so appreciate the acknowledgement and thanks. Cheers!

@DLANDCRUISER Месяц назад

Such a pretty frame

@OG-Everthing Год назад

elhamdoulilah!!!! so happy to hear that !

@takeshi1242 5 месяцев назад

Great! Beautiful truck. Using OEM is always the way to go ~~ I got a black LC200 and looking for a white LC100, like yours

@Jmjm1969 Год назад

Thank you

@TurboJThomas Год назад

This is great. I’m chasing the same clunk right now on my 06 LX. I just bought it and the axels look like part store axels. I did the flanges and differential bushings with OEM parts and that helped , but some of the slop is definitely with the axels themselves… What are your thoughts of CVJ axels?

@thefadshow Год назад

They are remanufactured so the splines will have wear I’d bite the bullet and buy brand new oem personally.

@leonidas9969 5 месяцев назад

Yea i take off the outer tie rod also

@merbesfield 9 месяцев назад

After 8 months is the clunk still gone? I have done everything you did and more and I still have the clunk/think when I go on and off the accelerator.

@thefadshow 9 месяцев назад

It’s gotten a lot better but my remaining clunk is in the differential. I don’t think it’s hurting anything so my plan is to run it until failure.

@jlinkhart 11 месяцев назад

Is that an FR shirt I see?

@seahawksforever9504 10 месяцев назад

I have a clunk sound coming from the rear when I go over speed bumps. I also get shudder if I go over 55 mph on the highway. You think the cv axle will solve this?

@thefadshow 10 месяцев назад

Sounds like rear upper trailing arms to me.

@seahawksforever9504 10 месяцев назад

@@thefadshow I'm going to replace the drive shaft front and rear with aftermarket first to see if the shudder goes away. Thanks!