10000mAh Portable Spot Welder minderRC DH30 Max V2 up to 650A Welding Current 

A good spot weld is achieved with high energy and in a short time. So the nickel does not burn. Since your device cannot provide high energy, you have to extend the time, which causes the nickel to burn and deform. In my opinion, do not rely on any Spot Welding device below 5 Volts.

It's a shame the USB output is so low. I could have alot of use for this if it was better.

Hello, I bought this product, I thought it could charge my iPhone 14, but it didn't. I saw that you could charge your phone, but I couldn't. What is the reason for this?😂😂😂

In the menu "continuous welding" , it's much better to select 2 or 3 pulses instead of 1. So You have 2 or 3 impulses very quickly (some milliseconds) , you don't need so much power, the welding is strong without burning the stripe.

Think they could supply a smaller display window?

güzel makina küçük olması ragmen parasının hakkını veriyor profesyonel

These tiny transistors how can hadle such high currents, I'm amazed! Very useful tool for your battery pack projects Brother ✌️

Friend, I have a bifrc dh30. I went to recharge it with a Type-C cable that I made myself but unfortunately I made the connections reversed in the Type C jack and ended up burning the spot welder board controller. Would you be able to tell me what model and specs the controller is on this board? It is that component that has 8 pins (4 on one side and 4 on the other). It is the only component that is visibly burned. I'm going to buy a similar controller and replace it with the burnt one. If you can help me thank you very much. Best regards

Awesome mini cell welding machine I saw first time 🌹🙂❤️

One of many of these devices on Aliexpress. The output port is specified as 2A. Apparently he doesn't deliver. For this price I would not buy this device.

Saygılar hocam iyi bayramlar türkiye için vergi ortalama nekadar çıkar bir fikriniz var mı

Güzel ürün

one slip pulling that strip and you'll slice halfway through your fingers

I am first and always better than my content bro ❤😂😢

Can anyone recommend a spot welder suitable for 2mm pure nickel please

are you using pure nickel or nickel plated steel strips?

I got excited when you started taking it apart.

ayari bozdun 0.3 ms yapmalisin 1 ms yaptın buda 1sn takamül eder nikel şeriti yakiyorsun

đen sì😅

Many Many Many Thanks

What is the battery type inside? Is it 3.7v 10000mah lithium battery or higher?

Do you recommend buying it?

Did you test with pure nickel or nickel plated steel? I wish you could test the Sequre SQ-SW2 the same way you tested this one. I can't find the current output for that one anywhere and I'm deciding between this one and the Sequre currently.

Looking great 👍👍👍

Palapa

Was that pure nickel stip or nickel coated steel?

Bom bom bom dia paraben

Next video upgrade transistor mosfet 2 pcs... 😁😁

👀👀👀👀👀👍👍👍👍👍👍👍👍

Ele solda bem a fita de 0.12mm na engrenagem 14 com 2 pulsos.

Ahoj, taky ji už mám a teď si chci přehrát nový Firmware 🙂

Bless it’s a little cotton socks 👍🏻

Super ❤👍👋

You should fully charge the battery before welding.

Good Video It's making black spot Thanks

güzel alet ama biraz pahalııııııı

Can it be used as a power bank as well?

Thanks for sharing Keep up the good work

Like 🎉🎉❤

Minder RC

Bom dia parabens muito bom

😮😮😮😮😮

Сколько стоит

great review! I have this spot welder and know its capabilities.

10 ampere