After serious analysis of this camera, I conclude that the camera is of acceptable quality. It record images and sound. The quality of the images is good, the quality of the sound is average. The quality of infra-red light is poor. As regard use of the camera, I have to admit that the video is quite different from how to use the camera. The scenarios on the video are mostly wrong. Fortunately, handling of the camera turns out to be much simpler than what the video shows: - press the V button to put the camera in stand-by (blue LED is on). The stand-by state lasts only 1 minute. - while the camera is in stand-by state, press briefly the V button to start recording (blue LED blinks 3 times, then is turned off). To stop recording, press the V button until the LED (blue and red) blinks 3 times, then is turned off. - while the camera is in stand-by, press the M button to start motion detection (LED switches on in red color). The camera is now in stand-by state with motion detection activated. Then, to start a recording session with motion detection activated, press briefly the V button (LED red blinks 3 times, then is turned off). One minute video are taken when motion is detected. To stop recording, press the V button until the LED (blue and red) blinks 3 times, then is turned off. Note that in that state the camera is turned off, and so is motion detection. - to use infra-red light, press the M button while recording. Pressing the M button again turns infra-red light off. I hope this can help you. So long !
This definitely helps, but the camera is constantly saving every minute for me. Any idea what I should do to stop it from picking up motion when there is none?
@@rikstardyIt's my understanding that you take the SD card out and put it in the card reader (mine came with one) and plug that into the USB port on your computer.
Everything looks nice when you get the product, but there should be more detail of how to use it properly or how to record or how to use properly the tape to know if the camera still working or at least somebody talking on the video that will help a lot even though this video is pretty good, but with those tips or make it better😊
Mine suddenly quit working - shows 100% charged, but none of the record buttons work - it worked well when I first got it and have carried in m pocket for a couple months and went to use again and it won't go into record mode - have also pressed the reset button multiple times to no avail. Any suggestions would be appreciated - or would like to know where to get it looked at.
@@kingsymfuhny9376 with full battery it lives for some days all depending on the activity. Battery never ended for me. Motion detection. But it is trashed now, the power button just fellt off. Bad quality button. It was good as long as it worked.
Der versteckte Anschluss wo die Speicherkarte reinkommt, dort wird das Gerät geladen und mit dem PC verbunden. The hidden Port unter the Micro sd slot, it is for charging and for PC Connecting
@@citic101You can buy the item in Amazon Here is the link :www.amazon.it/Telecamera-Sicurezza-Caricabatteria-Videocamera-Rilevamento/dp/B07TFHLJDD If you have any questions, you can ask the seller.
You can buy the item in Amazon Here is the link :www.amazon.it/Telecamera-Sicurezza-Caricabatteria-Videocamera-Rilevamento/dp/B07TFHLJDD If you have any questions, you can ask the seller.
After two weeks, I didn't succeed yet to make it work. It always powers off, no matter if I follow the button sequence shown here or in the paper manual (which are not the same, by the way).
How do you set the correct date and time for the video timestamp? right now for me it's like 2,5 years behind. is it possible to turn the hard burned timestamp off entirely?
This video does not show how to get videos off of the device. I used mine once, and now my computer does not detect the device is plugged in, so I am unable to get to any of the videos. When I wrote to the seller, he told me to reformat the SD card, but I can't even get to the SD card to reformat it! I guess I'll have to send it back
“Open the time.txt file in the memory card, change the date and time in the document to 20200801235959, and click Save. (Note: please do not change the location and format of the time and date when modifying”.
@alchemyst9821 realized once i downloaded the video with wrong date, I cannot pull it off. Claims 3 years ago. Need to make sure the NO is on. Gets rid of it totally from then on. Not sure how it even turned on. But yessir thank you, I appreciate you
@alchemyst9821 ah, then you need a Ring type camera then my friend. And pay the subscription of $10 a month to see and record nonstop. I have both. But this is my secret hidden camera.
Die Bedienungsanleitung ist völlig unverständlich, geht man die Schritte genau so durch, passiert nichts. Egal welche Tastenkombination man wählt. Man sieht nichts was überhaut eingeschaltet ist. Für uns ist diese Kamera komplett unbrauchbar.
You can buy the item in Amazon Here is the link :www.amazon.it/Telecamera-Sicurezza-Caricabatteria-Videocamera-Rilevamento/dp/B07TFHLJDD If you have any questions, you can ask the seller.
STANDARD RECORDING To activate standby mode, hold down the "V" button until the blue light is solid. Click the "V" button again, and it will blink 3 times, indicating that it will save recordings every 10 minutes. MOTION DETECTION To enter motion detection standby mode, hold down the "V" button until the solid blue light turns on, then press the "M" button once. The solid red light will indicate that it is in motion detection standby mode. Press the "V" button once, and it will blink 3 times, placing it in motion detection mode. INFRARED MODE To start standard recording, hold down the "V" button to enter standby mode until the solid blue light turns on, then click the "V" button again and the "M" button once to activate night vision. The blue and red lights will blink 3 times simultaneously, indicating the infrared mode is enabled.
Not true about infrared auto mode. Three violet led flashed indicate IR on (and will stay on even in strong light) one violet led flash indicate IR off (and will stay off even in pitch dark). Useless.
pointless device!....only good if your gonna place it on a desk/table!...useless if you wonna record infront of you outside in a covert situation! 👹👹why don't people think product designs through before implementing them!