Тёмный

1000HP All Motor Pickup! - NoRecess C10 by MRC Fabrication 

HotRodHippie
Подписаться 47 тыс.
Просмотров 10 тыс.
50% 1

Want to see and hear a truck making JUST shy of 1000HP? A C10 Race Truck? Sure who doesn't want to hear 1000HP screaming around a track? Check out this video to learn about the MRC Fabrication project No Recess C10 Race Truck!
The BONUS Episode: • 1000HP Sounds to Fall ...
MRC Fabrication Instagram: / mrcfabbullard
Mittler Bros Hydroshox: www.mittlerbros.com/tanner-by...
Bell Racing Development: / bellracingdevelopment
*** Patreon: / hotrodhippie
*** Social Media Links: www.hotrodhippie.com/links
0:00 - Intro
0:38 - MRC Fabrication Shop
1:47 - Mittler Bros Hydroshox
2:28 - NoRecess
3:53 - 1000HP Engine
4:54 - Interior
5:23 - One-Off Wheels
6:10 - Brakes & Front Suspension
6:27 - Rear Suspensions
7:28 - Running & Driving
10:01 - BONUS Episode
10:20 - Outro
-----------------------------------------------------------------------------------------------
*** Recommended Products (Affiliate Page): www.amazon.com/shop/hotrodhippie
-----------------------------------------------------------------------------------------------
Check out my other pages: www.hotrodhippie.com/links
-----------------------------------------------------------------------------------------------
Filmed with:
*** Main Camera: amzn.to/2U4b1nZ
*** Video Recorder Used: amzn.to/30cAvU9
*** Action Camera: amzn.to/2ATHS73
*** Second Camera: amzn.to/371EhBM
*** B-Roll Lens: amzn.to/2xmg85L
*** Wide Angle Lens: amzn.to/2YiZTmH
*** Lav Mic: amzn.to/2DFwgR5
*** Shotgun Mic: amzn.to/2IjTJiB
*** Mini Tripod: amzn.to/2Eok8Fw
*** Monopod - amzn.to/2C1YEMU
*** Tripod: amzn.to/2yASruf
*** Gimbal: amzn.to/2FNwesV
*** Slider: amzn.to/3nQhe1S
*** Primary Lighting: amzn.to/2jHROnW
*** Additional Lighting: amzn.to/2DImspx
*** RGB Lights: amzn.to/2UUGAOk
*** Drone: amzn.to/2yDkwkI
-----------------------------------------------------------------------------------------------
The opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AMAZON AFFILIATE LINKS. Affiliate links give the HotRodHippie a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally.
#c10 #hotrodhippie #fabrication

Авто/Мото

Опубликовано:

 

2 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 29   
@HotRodHippie
@HotRodHippie 3 года назад
The Bonus Episode w/ more Driving Action and my Ride! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-lnsimCWp3G0.html
@RonCovell
@RonCovell 3 года назад
Unbelievable build quality, especially given the short time allotted!
@HotRodHippie
@HotRodHippie 3 года назад
It was really a team effort, they put in a lot of hours on this thing but I think it was all worth it. Well I guess that easy to say as the one who didn't lose any sleep on it. I don't know if you've had much interaction with Jimmy but he and his crew are some nice folks in my experience their craftsmanship really shines through.
@JaredR1996
@JaredR1996 3 года назад
I remember seeing and hearing that truck for the first time on video. Sounds like a gawd damn NASCAR. Absolutely amazing
@HouseofChop
@HouseofChop 3 года назад
Awesome truck! Excellent presentation. Thank you for bringing it to us. 🔥👍🏼🔥
@davestevens5382
@davestevens5382 3 года назад
Good to see you making content again Alan, awesome C 10 !! ✌️
@HotRodHippie
@HotRodHippie 3 года назад
Much appreciated. 2020 really put a damper on... everything, ha. I should be back to consistent content for 2021 going forward.
@chrispy398
@chrispy398 2 года назад
Such a sick truck 🤘
@johndevries8759
@johndevries8759 3 года назад
Nice job of critiquing the build, the suspension looks like it could have a video all of its own. More of this kind of stuff please. Thanks, J
@HotRodHippie
@HotRodHippie 3 года назад
Yea, I kind of wish I'd gone up a couple times during the build and filmed it mid-build as that really could have shown of the suspension. All the same I think folks can gather the work that went into it and just what it can do here. Thank you.
@cannednolan8194
@cannednolan8194 3 года назад
Look good and and quick. Lots going into the suspension.
@HotRodHippie
@HotRodHippie 3 года назад
Quick it most certainly is. I’ve driven some fast cars but I don’t know that I’ve ridden in faster.
@cannednolan8194
@cannednolan8194 3 года назад
@@HotRodHippie you can tell it’s quick but no room to stretch it out.
@HotRodHippie
@HotRodHippie 3 года назад
@@cannednolan8194 in the bonus episode I’ll include just a quick clip of it going 150Mph on a bigger track.
@metalbob3335
@metalbob3335 3 года назад
Fantastic build. Good video.
@HotRodHippie
@HotRodHippie 3 года назад
It’s a feat of engineering and I’m glad I got to share it with folks.
@Waldo425
@Waldo425 3 года назад
This thing is the best kind of insane. That sound!
@HotRodHippie
@HotRodHippie 3 года назад
“Best kind of insane” is an excellent description.
@SS454LS6
@SS454LS6 Год назад
Awesome truck. Maybe I missed it, but what is the weight?
@garagemonkeysan
@garagemonkeysan 3 года назад
What a monster. Mahalo for sharing! 🙂🐒
@HotRodHippie
@HotRodHippie 3 года назад
It’s a beast to say the least. Thanks 🙏
@georgef1176
@georgef1176 3 года назад
Jimmy is the one who designed the hydro shocks, MB just makes them
@HotRodHippie
@HotRodHippie 3 года назад
They were Jimmy’s idea. Mittler Brothers did the engineering and manufacturing. I didn’t make that clear enough you are correct.
@LifeWideOpen780
@LifeWideOpen780 3 года назад
Is the video sped up when he is driving
@HotRodHippie
@HotRodHippie 3 года назад
Not at all. All the clips in here are either real time or slowed down a bit, none are sped up.
@josephadams4500
@josephadams4500 2 года назад
is that hood made from scratch or is it a modified factory hood??
@HotRodHippie
@HotRodHippie 2 года назад
Modified factory hood. Center section depressed and filled to match. Same as the roof skin.
@chrispy398
@chrispy398 2 года назад
That’s not a step down on the roof it’s added exterior pieces
@HotRodHippie
@HotRodHippie 2 года назад
What you are seeing is where the roof skin seam is. The center of the roof is absolutely stepped down and recessed in, not the ends raised up. The middle is just recessed down to where the original skin seam would be, making it look cleaner there. Look at photos of a back window area on a stock “Square Body C10” and you will see the middle is normally higher than this.
Далее
750HP 'Survivor Series' C10 with full IRS chassis!
10:50
Quitting YouTube? NEW SHOP?!?
12:11
Просмотров 4,3 тыс.
WE BUILD RACE TRUCKS | Level 7 Motorsports C10
30:29
Просмотров 254 тыс.
Sleeper truck races EVERYONE on the highway!
4:44
Просмотров 1,8 млн
Фишки FORD F-150. Часть 2
0:54
Просмотров 3,1 млн
PRADO 250 - классная машина!
0:28
Просмотров 4,3 млн
BYD Automobile Dynasty BYD Han Tang is impressive
0:16