(1108) Challenge: Canadian Split Personality (Split Core Lock)

Подписаться 593 тыс.

Просмотров 66 тыс.

50% 1

In this video I take on a Canadian hand-built split personality (split core) challenge lock designed by Al, specifically to defeat picking attempts.
Whipped videos highlight custom made locks sent to the LockLab as a challenge. They contain innovative modifications, unique security designs, and careful craftsmanship. Challenge lock design is difficult, to say the least, but many LockSporters excel in lock design and hand craftsmanship. Because there is such innovation among LockSporters, many manufacturers pay attention to the WHIPPED videos and incorporate the security techniques into their own locks.
There is only ONE RULE: The key must work. You are free to cover up the key to prevent me from seeing it until after I successfully pick (or fail to pick) the lock. I will make THREE 10-minute attempts (down from six 10-minute attempts in April 2018). If I fail to open it in that time, it will become a WHIPPED video. If you are interested in sending a challenge lock, please use this address:
LockLab
P.O. Box 2160
Merrifield, VA 22116
Like this video? Subscribe here: ru-vid.com...
👇🏻Links👇🏻
⭐ Support LockLab on Patreon: www.patreon.com/bePatron?u=29...
⭐ Support LockLab through Paypal: www.paypal.me/LockTube
Visit the Tribe’s website at: www.Lock-Lab.com
LockLab’s Modular Lock picking courses: www.lockpickshop.com/Bosnian-...
Looking for tools?
🔹 MultiPick Services - shop.multipick.com/
🔹 Sparrows Lock Picks - www.sparrowslockpicks.com
🔹 PickPals - www.pickpals.com.au
🔹 Lock Pick Shop - www.LockPickShop.com
🔹 UKBumpkeys - www.ukbumpkeys.com
🔹 LockPickWorld - www.lockpickworld.com
🔹 Brockhage - www.lockpicks.com/
🔹 SouthOrd - www.southord.com/?...
🔹 My vise is the Panavise model 350. - www.panavise.com
Outro Music
🎵 Music from Jukedeck - create your own tunes at jukedeck.com
Hashtags
#Bosnianbill #LockLab #LockPicking #Lock-Lab
~-~~-~~~-~~-~
Please watch some of my other videos!
My Channel Main Page: goo.gl/EYz5x8
Most Recent Upload: goo.gl/wEr5UZ
Most Popular Upload: goo.gl/cbpSKw
My "All of Bosnianbill's Videos" Playlist: goo.gl/R7p5M2
The "High Security & Challenge Locks" Playlist: goo.gl/GKkESM
~-~~-~~~-~~-~

Опубликовано:

4 июл 2017

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 215

@lockpickinglawyer 7 лет назад

Nice picking on a clever design!

@anuarfriedrichgentsch5048 7 лет назад

LockPickingLawyer hahaha. The lawyer is here, too.

@XenKaidos 7 лет назад

next up... I want to see a split core first half normal core.. second half dimple lock.

@NelielSugiura 5 лет назад

I had a dream of a 17-pin, three-core lock with different types on each core. As awesome as it would be as a challenge lock... I think the door is the weak point by then.

@MatrixExpress 4 года назад

How are you gonna push a dimple key through a paracentric keyway ?

@danhammond8406 3 года назад

@@MatrixExpress the same captain hook picks his nose, Very carefully......

@lforlight 7 лет назад

The shot of the tension wrench next to the key was brilliant.

@jzburda 7 лет назад

That is a beauty of a lock.

@Robert-ko6wr 4 года назад

Send the lock back one piece at a time with a ransom. Hold out for chocolate. You deserve a scooby snack or four for this crazy lock! Cheers!

@jcprov9481 5 лет назад

Absolutely amazing design AL, and another great lock lab video. Am I the only one who also enjoyed the little intro? For some dumb reason it made me smile.

@mesaprime4368 5 лет назад

So far my favourite intro

@philthejet 5 лет назад

Never underestimate us Canadians, we have never lost a war, we are tough as nails to wisthstand the 349 days of winter in our igloos and we are the greatest hockey nation of the planet. In this video, we can see how experienced and wise you are with locks. Take care Mr. Bill.

@linux0808 7 лет назад

When I'm not fighting polar bears off my turf, I make locks for my Igloos.

@zacharylagler242 6 лет назад

Remi Leves I hear you, gotta keep those pesky elk out...

@donna30044 6 лет назад

You can use an ice pick to open them.

@jamesdaniel9033 4 года назад

It's only in the northwest territories and a bit of the upper half of the provinces its 9 months winter 3 months bad sledding

@MonkeyLockpicks 7 лет назад

Great craftmanship on that lock!! Loved it!

@zardzewialy 7 лет назад

At last! An intro that I could watch over and over and over again :D

@tomrafter4940 7 лет назад

Bill, that was amazing work. Loved the video. You are the master.

@peterdambra6387 6 лет назад

Great design Al. Nice machining. Very nicely done.

@daleb1225 7 лет назад

Amazing, the talent displayed from all parties is amazing

@jamesmurphy8014 7 лет назад

That is the best lock we have seen. I guess your success is because your the genius at lockpicking. Only you or maybe The Lockpicking Lawyer could have figured this out. Great work.

@petemartin5487 7 лет назад

Luck? Bullshit, brilliant solution to a brilliant lock! You both have devious minds! Of the finest kinds!

@granttabor1338 7 лет назад

Al is one heII of a locksmith AND machinist. Great 'untangling" Bill

@xpndblhero5170 2 года назад

That's actually an insanely impressive build... I expected the grub screws way down 3 and 4 when he took it apart and realized they're gone, I've seen that in magic style puzzle boxes, but I didn't expect it to lock the core in, very nice touch.

@Physhi 7 лет назад

These Canadian locksmiths are insidious! The Bowley is impressive enough but to make a padlock like that blows my mind.

@drewcaplin6400 7 лет назад

Thanks Bill for another great video. Kudos to you Al.

@sthlmbanditsofficial 7 лет назад

"All the way in - and it's still gonna be pretty tight" :D

@senounatsuru6453 5 лет назад

*THAT'S WHAT SHE SAID*

@ABD4VIDS 6 лет назад

Wow!!! That is a work of art!! Great lock!!

@AalbertTorsius 7 лет назад

This lock is a great work of art, symbolizing the nation of Canada, as it is split between its English and its French speaking citizens. It tells us we must examine ourselves carefully and not make any assumptions, to open our hearts.

@KeithWGibbs 7 лет назад

That is fantastic. Well done, Al.

@fenixrock80 7 лет назад

Awesome video and very cool lock. Nice job Bill and Al!

@rationalmartian 7 лет назад

Bravo to them both. Superb.

@redcatimaging 7 лет назад

That's an amazing design, very impressive and it really got you ;D. Cool that you found a creative solution to get it open :).

@Darkassassin09 7 лет назад

Beautiful lock, kudos to the designer

@robert36902 7 лет назад

That's some amazing alien technology! Thanks to both you and the lock creator!

@Islacrusez 7 лет назад

Quite the design on that lock. I'll make note and add it as a layer to the design I've been theorising about. A nine-pin three-core would be a hell of a drug.

@Brodoc 4 года назад

Another great video. Thanks for what you do. I have learned a lot from your videos.

@villian_von_badguy_ii145 7 лет назад

Beautifully engineered and devious lock

@stevewalker7822 7 лет назад

What a task to engineer the parts to this lock. Really neat idea.

@Sftifhy 7 лет назад

that was so frustrating to watch I kept yelling take the center screws out

@JasperJanssen 5 лет назад

They were visible on camera, but not in person.

@pjdambra 7 лет назад

Love it. Since job Al. Great pick Bill.

@paultroiani255 7 лет назад

just... wow! A very nice piece of work!

@krisrides9085 7 лет назад

What a lock! would of hated to have picked this i would still be trying next year

@Steel-Pinnings 7 лет назад

Wow, could you imagine if he had made the pins into challenge pinning. That lock would have been extremely difficult.

@anthonymcgovern2146 7 лет назад

Man, that is one hell of a lock!

@loz11968 7 лет назад

Nice job on the lock Al

@teastation9396 7 лет назад

We don't need a travel ban on Canada - just a big solar wall. We can hire Al to make the locks for it.

@PhilippeMarseille 7 лет назад

Nice work "AL". Hey USA, don't build a wall between us and you.. I don't want to miss out on all that great beer from Vermont!

@rationalmartian 7 лет назад

WOW. That was some damn tricky lock. You did seriously well to suss it. That extended ground tensioner was kinda lucky to hit just like that. But we all need a little luck occasionally. That was a damn good match. Bravo. I thoroughly enjoyed that.

@paoloconforto5600 7 лет назад

amazing work!

@rice0009 7 лет назад

Very creative lock! Impressive!

@Jack_all 5 лет назад

this channel is great!

@JimBailey 7 лет назад

Thanks Bill

@lostandfound1004 7 лет назад

nicely done!

@KarlMcClelland 7 лет назад

First time watcher, but watched about 12 videos so far. Great entertainment and have just bought a set from a UKBumpKeys just to test out my skills opening some padlocks lying around in the second drawer down. Keep up the great work !!! Fascinating stuff.

@derekmoon6911 7 лет назад

you are a true master of locks... don't know much about canada.... but damn you know your locks lol

@georgekelp 7 лет назад

Ingenious! Great lock.

@LockpickingNord 7 лет назад

nice split core lock! very well picked and explained!👍☺

@francoisdastardly4405 3 года назад

Really very nice design to put in some commercial lock

@thumperlockpicking9269 7 лет назад

very interesting core, and ingenious in how you think Mr.Bill.

@daggins11 7 лет назад

great lock & picking, also like the new video at the start.

@TheUniquePlumberman 7 лет назад

You had me yelling at my screen "Check for retaining screws in 3 & 4 Bill!" on this video. I suspected as much when I saw the (what appeared to be empty) 3 & 4 chambers. Great work otherwise on the picking job and to Al on the creative lock. Next time throw in some evil pinning and threaded core. XP

@stuckpick7931 7 лет назад

great lock and excellent pick.

@danielandnicolettehunziker5923 7 лет назад

I've never seen the back end of a plug like that. Also if he'd just turned the back half around then the key profile would be reversed. Nice work on the lock too, very clever.

@demofilm 7 лет назад

Genius lock!

@lockingpaul 7 лет назад

can is a big country, it's not all snow covered except in winter. we love locks. cool vid ...nice to see some original stuff.

@mrlox9576 Год назад

Lol, nice spin on things. He did well. But as always, Bill got there in the end. 👍

@SonOfPepsi 7 лет назад

I don't even pick locks but I love your channel.

@josuelservin2409 7 лет назад

I started doing it after watching his channel for a long time. It's a nice and fun challenge.

@xXKILLBOT27Xx 7 лет назад

It's amazing how thought out this lock is. If they would have put some challenge pins it would have ended up in the naughty bucket for sure.

@jonathanherring9915 7 лет назад

Nice, ice covered! Igloo doors only require a propane torch to unlock!

@zacharylagler242 6 лет назад

They only use ice on igloo doors in Quebec (French Canada).

@jcapicy 7 лет назад

amazing lock!

@venomvaping3883 5 лет назад

I kept watching you trying to take it apart and i kept thinking, come on shine a flashlight down there i think i saw more screws lol. I wasnt sure but i thought i saw them but i had faith yould figure it outbone way or another

@jeffmoss26 7 лет назад

that pink lockwood I sent you from Will in Australia was also a split core :)

@MarcKulhavy 7 лет назад

VERY cool lock! A lot of thinking went in there. I wonder how the picking would have been different if there were more security pins inside.

@TwistedMetalsOfTexas 7 лет назад

man that was a nasty one bill!

@n0sl1w 7 лет назад

Maan that is some clever stuff!

@goneutt 7 лет назад

I hear that Nova Scotia has a thriving locks industry

@mynock250 7 лет назад

Fantastic

@JEMHull-gf9el 7 лет назад

LockpickingLawyer Picked a challenge lock like this year or so ago, quite impressive

@jasonmurawski5877 4 года назад

I thought of this the other day without seeing this video, and i thought it would make a great challenge lock, now im disappointed someone else came up with it before me

@vova2000 7 лет назад

am i the only one screaming half way through gutting that there must be set screws in 3 and 4 :) great lock idea... awesome pick on that!

@lucifer3135 5 лет назад

That was wicked

@EricRtheModFather 7 лет назад

Proud to be Canadian

@jordanscoville9423 7 лет назад

Well played ail

@whollylostandgone 5 лет назад

As a Canadian I approve this for export.

@mork6668 6 лет назад

awsome...just awsome!!

@freakygardener8033 Год назад

GENIUS!!! 👍👍

@davidbrennan1670 2 года назад

That's an awesome lock

@harrychung433 7 лет назад

Was guesting there were plugs in 3 and 4 chambers, before you went to your commercial break there.

@grosstravis 5 лет назад

Sneaky guy. Haha. Very good idea.

@joec2442 4 года назад

Wow, just wow

@cjlfilm 2 года назад

Thank you for all those years of sharing your knowledge with us. Enjoy your well deserved retirement👋🏻👋🏻👋🏻

@tonyhong20 7 лет назад

That was one hell of an intro

@Ampera_ 7 лет назад

An interesting idea I had would be to have a lock like this, but each and every pin has a separate core that spins independently from each other. Then each alternating core would have the warding smoothed down so that you can't tension it with just a long tensioner.

@guillaumebergeron9848 7 лет назад

Hello from under the ice!!

@pnutdunne81 7 лет назад

Nice lock and pick. The wafer isn't an anti-bypass it's there to prevent the core turning anticlockwise

@HermitBlake 7 лет назад

The body is a Stanley, D&B had several next to where I got my laminated Stanleys.

@Trevinator1990 7 лет назад

i was wondering if anyone was going to make a split core lock for bill to try and pick for the longest time! i was thinking of how to make one, but couldnt think of a way to hold the two halves in place. it was around the 12:00 minute mark that i realized that he used pins 3 and 4 as set screws to hold the two halves together. AWESOME IDEA!

@RoeLunatic4ever 7 лет назад

whow....i like this one!

@bkthrill 7 лет назад

nice tough lock

@grouchyed2561 7 лет назад

That lock body is from the Stanley 24/7 product line.

@HotboiEngineering 7 лет назад

This split core concept would work wonderfully with a 7 pin lock as you can still have 2 to lock the cylinder but you still have 5 pins for security.

@mdsanta3801 7 лет назад

Go Canada! he he he he. Thanks Al!

@bmitch3020 7 лет назад

Cool lock! Was there anything requiring you to pick the first half other than the tension wrench? Looks like you could have used a bent wire, maybe a really long flag pick, and turned this into a two pin lock, as long as you could overcome the spring tension.

@georgeeads8689 7 лет назад

I really enjoy your videos but I saw the small allen screws in the 3rd and 4th chamber.

@artiz32000 7 лет назад

finally you find it

@turgsh01 7 лет назад

Why isn't there more locks out there with multiple cores? Seems like an excellent deterrent to amateur lock picking. I really hope this becomes a popular lock style someday.