12V 150W Backup Battery Switching Module high power Board Automatic switching battery power XH-M350

Подписаться 2,2 тыс.

Просмотров 40 тыс.

50% 1

Reviewing of 12V 150W 12A Backup Battery Switching Module high power Board Automatic switching battery power XH-M350_UPDATED 2021
12V 12A Mini UPS XH-M350 Power-OFF Protection Module Automatic Switching Module
Name:Backup Battery Switching Module Board
Product name : Storage battery emergency switch module
Model : XH-M350
Control voltage:DC 12V
Control current:12A
Support power:150W
PCB Size:54*26.4mm
Net wight:28.2g
Description:
This module is for storage battery emergency switch.
It adopts the high quality industrial relay and the effective control current can reach 12A. In control of 12V, power can reach 150W. It is widely used in incubators, computers, networks and so on.
www.aliexpress.com/item/10050...
WARNING:
This video is for demonstration and educational purposes only. Each demonstration presents risks and hazards that must be fully understood before attempting.
And should be performed only by professionals
Disclaimer:
The information, demonstration, and any content contained in this video are for informational purposes only. PLEASE READ Warning… do this at your own risk. I am not responsible for what you do to your device.
MUSIC:
Track title: Kurt
From: RU-vid Audio library
IMAGE:
Quranic Dua #35 (Surah al-Ahqaf)
From: quranicquotes.com/topic/dua/p...
I have approval from the site quranicquotes.com to use the images

Наука

Опубликовано:

9 сен 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 82

@nandobkr 10 месяцев назад

Muito bom. Very good. Like!

@alaaquirk76 8 месяцев назад

I don't see a diode to protect from reverse voltage spike (Back EMF) caused by relay's coil. Can you explain?. Does the capacitors do the job?.

@athurein26 Год назад

This module is not suitable for WiFi router. It has power cut a few seconds.

@MoMan1323 2 года назад

Hi, does this charge the battery while it's on main 12v? That would be a perfect build. If not can you suggest a method of keeping the battery charged for continued use. Thanks

@LEQSBeaprofessional 2 года назад

Only backup battery switching module not for charging battery ... You can connect charger module to the battery for charging

@rolandwakeman3391 4 месяца назад

I see a problem with this item the heater is running from a power supply and you may not get a power cut for months in the meantime the battery is out of charge.?

@wormster1969 Год назад

What gauge have you used to connect the battery to the switcher?

@modelsfirst 7 месяцев назад

Okay. So I see a problem. The product description says the same voltage is required for the power supply, the battery, and the load for this work. But a 12v battery requires a higher voltage for it to charge - 13.5 to 15 volts. Then the battery supplies 12volts to for example a 12volt Lighting circuit - the Load. How can this work then if the voltage must be the same for the supply, the battery & the load? The battery won't charge and will eventually go flat if this is the case.

@REZOLUTIONER 5 месяцев назад

This module doesn't charge the battery.

@erkanz7198 Год назад

Hi, Can this handle more than 150w if I change the relay on it with the high current one? The load will be around 30A

@mosaadfayez7249 2 года назад

التوفيق ياهندسة

@LEQSBeaprofessional 2 года назад

@mosaad faeyz اللهم آمين يارب العالمين ... حبيبي يا هندسة

@alinabhan4758 2 года назад

Please test, when the adapter that is disconnected is AC voltage not DC voltage, is the module delay in switching due to the elco factor of the adapter/PSU. Thanks.

@LEQSBeaprofessional 2 года назад

According to the specifications for this module, the control voltage is DC 12V not AC

@alinabhan4758 2 года назад

@@LEQSBeaprofessional I mean it was disconnected from the AC connection, is there a delay in switching?

@LEQSBeaprofessional 2 года назад

@@alinabhan4758 For normal loads such as lighting, heating or cooling, you will not notice any lag, but the lag for sensitive devices such as routers and cameras may cause to reboot the device (I have not tried it on a router, but I think that if there is a lag it will be a small fraction of a second) due to the capacitors in this module.

@jeralddcruz7325 Год назад

Does this one has auto cut off voltage feature? If the battery is full it will cut off so the battery will not be overcharge

@LEQSBeaprofessional Год назад

Only backup battery switching module

@muhammadkartal 3 месяца назад

I want to design the same project, but using MOSFET to reduce the replacement time between the two sources

@modelsfirst 4 месяца назад

Is there version that works with a 6 Volt power supply?

@drompyvandrom918 2 года назад

Is it possible battery on IN1 and adapter on IN2? when the battery is empty that he switches to adapter. something like this would be useful in combination with my solar panel

@LEQSBeaprofessional 2 года назад

Yes it is possible, but it should be noted that the voltage 12V which is connected to the IN2 will be transferred to the OUT, and when the voltage 12V is connected to the IN1, the voltage of IN2 will disconnect, and the voltage of IN1 will be transferred to the OUT ... Your project must be built on that

@drompyvandrom918 2 года назад

@@LEQSBeaprofessional ok thanks for the info

@LEQSBeaprofessional 2 года назад

@@drompyvandrom918 ❤❤❤

@joeyjohnson9834 2 года назад

would this work if IN1 was a 12v battery and IN2 was also a 12v battery? would it switch once IN1 battery dropped below 12v?

@LEQSBeaprofessional 2 года назад

I think it is possible but may be not swich once dropped bellow 12v exactly for example may be switch once dropped bellow 10 v may be , but it should be noted that the voltage 12V which is connected to the IN2 will be transferred to the OUT, and when the voltage 12V is connected to the IN1, the voltage of IN2 will disconnect, and the voltage of IN1 will be transferred to the OUT ... Your project must be built on that

@yajaudiophile1892 5 месяцев назад

is it ok to put both batteries (12v) in the input side? switching from one battery to another? thank you for your response.

@REZOLUTIONER 5 месяцев назад

Yes. It's ok.

@AbdulBas12 3 месяца назад

How the battery will charge ??

@rosekreuze 2 года назад

i have a similar module xy-850, it also has a delay of a fraction of a second. i put 3 1000uf capacitor on the output but the switching delay still persist. can we do something about it? my router only draws 0.3amps at 12v.

@LEQSBeaprofessional 2 года назад

In fact, I did not try to change the capacitors, I just made a review for it

@dharmeshxx 2 года назад

I think the delay is from the relay operation. Can we replace with the fast operation relay.

@LEQSBeaprofessional 2 года назад

Maybe relay also may be capacitors

@ashika8504 Год назад

Are get solution mean please write on her

@MrVishalarwade Год назад

@@dharmeshxx use solid state relay

@ppgg997 2 года назад

Is this 100% uninteruptable? I want to power a mini pc, but also havbe the ability to switch to batteries if i want to "move to an other room "for example without turning off the system

@LEQSBeaprofessional 2 года назад

For normal loads such as lighting, heating or cooling, you will not notice any lag, but the lag for sensitive devices such as PC, routers and cameras may cause to reboot the device (I have not tried it on a PC, but I think that if there is a lag it will be a small fraction of a second) due to the capacitors in this module.

@bigoldgrizzly Год назад

I have seen this unit advertised with a delay time of 1 second or more - perhaps depending on how truthful the seller is. Certainly not 100% uninteruptable

@Zorema_Hnamte 6 месяцев назад

What is its switching time

@sabirmidda 9 месяцев назад

It works with Li ion battery?

@electronic_control-unit 3 дня назад

Kya problem Hai power off ho kr on Hoti Hai 😢Mary pas b yea hai

@bobbytaraantino 2 года назад

Can it charge the battery while the dc load is up?

@LEQSBeaprofessional 2 года назад

Only backup battery switching module not for charging battery

@dharmeshxx 2 года назад

What is the switching delay time

@LEQSBeaprofessional 2 года назад

It is not mentioned in the manual but I think that a small fraction of a second due to the capacitors in this module.

@syedarsal6960 Год назад

this module can charge the battety ???

@dammikaranathilaka2951 2 года назад

Can this use operate wifi 12v Wifi router with uninterupted power supply?

@metrointernetkafe 2 года назад

Need to try. Those caps looking enogh for half second.

@LEQSBeaprofessional 2 года назад

For normal loads such as lighting, heating or cooling, you will not notice any lag, but the lag for sensitive devices such as routers and cameras may cause to reboot the device (I have not tried it on a router, but I think that if there is a lag it will be a small fraction of a second)

@athurein26 2 года назад

@@LEQSBeaprofessional I think if transistor or SCR is used instead of relay, much faster and no lag.

@MrVishalarwade Год назад

Nop, i tried

@MrDilmaher 2 года назад

Could you use on diesel heater

@LEQSBeaprofessional 2 года назад

@Daemon Maher I don't have the technical data for this diesel heater, but its power must not exceed 12V, 12A, 150W ... also, the DC power adapter & battery capacity must be sufficient to operate it.

@MrDilmaher 2 года назад

Thanks yes got in touch with someone who used one on diesel heater so thanks for your video helped me

@LEQSBeaprofessional 2 года назад

Welcome

@sticks0012 Год назад

To slow for diesel heater drops it out.

@Awais_ali_Official_1 19 дней назад

Battery low pr chang hoga

@rodelstv7438 2 года назад

can I put inverter in load side

@LEQSBeaprofessional 2 года назад

@ rodel's TV Yes, you can but the load must not draw a current greater than 12 amperes ... also, the DC power adapter & battery capacity must be sufficient to operate it.

@atulgoyal7536 8 месяцев назад

Can this module charge the battery as well?

@REZOLUTIONER 5 месяцев назад

@vivetu 2 года назад

Can this circuit charge the battery? Thanks

@LEQSBeaprofessional 2 года назад

Only backup battery switching module not for charging battery

@modelsfirst 7 месяцев назад

@@LEQSBeaprofessional Perfect build would for it to route the power voltage through the battery to keep it charged on a trickle then when the power supply is not present for the load to switch to the battery power?

@mohdfaiz3070 2 месяца назад

What happen battery low.this auto charge?

@ideologymuslimcommunity4647 Год назад

Can it change the battery also please let me know 🙂

@LEQSBeaprofessional Год назад

Please explain more

@ideologymuslimcommunity4647 Год назад

@@LEQSBeaprofessional i want to know by this module can i change my battery also

@LEQSBeaprofessional Год назад

@@ideologymuslimcommunity4647 If you mean changing the battery with another source of DC voltage, then I think you can do that, but I personally did not do that.

@ideologymuslimcommunity4647 Год назад

@@LEQSBeaprofessional would you please send me your email address please

@stanst2755 9 месяцев назад

What if you just skip this module and use the battery connected to the power supply. Current will be drown from the power supply, the battery will be fully loaded. When there is the outage battery will be used. Whta is the advantage of this module? Voltage regulator can be used to produce stable 12V. My router works fine for input voltage 9-24 so it has the regulator build-in.

@Alinrzv 9 месяцев назад

i'll give you an example in my case i have my wifi modem all time connected to my lithium batteries mini ups, but i want my cc cameras & nvr to connect on the same ups when there are short power outages, so i'll keep my nvr and cameras on power source and switch to my minis ups ONLY when there's a power outage , my mini ups has a total of 24w continous power usage in order to be able to charge the battery as well otherwise will just complete drain because it cannot charge the batteries in time , i allready ordered this piece of device today .

@stanst2755 9 месяцев назад

@@Alinrzv I checked how it works and chosen the powerbank connected to power source. I read in comments on aliexpress these cheap ups switch so slow the device can restart. Powerbank works fine but I do not want large lithium battery at home. Will try to setup agm battery connected to continuous charger.

@Alinrzv 9 месяцев назад

@@stanst2755 as long as there is a relay that needs to power first before switching there will be a delay, if its an electronic relay (think of something like SMD/SMT - SOLID STATE RELAY) that is all time powered that can switch quickly, that black box thing in this power switch pcb is using coil and based on electromagnetism, thats where the delay comes from (is like a phisical button that switches when the coil is powered), you can actually order some smd/t relay and change it :) Check this video explaining relays , is fun ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-n594CkrP6xE.html

@gorjanasrinivas3100 2 года назад

Make 12 volt ups

@LEQSBeaprofessional 2 года назад

I do not understand what you mean, Please clarify

@arundaskerala6059 2 года назад

Is it zero lag

@LEQSBeaprofessional 2 года назад

@Arun I think so... That is appear on the bulb, For normal loads such as lighting, heating or cooling, you will not notice any lag, but the lag for sensitive devices such as routers and cameras may cause to reboot the device (I have not tried it on a router, but I think that if there is a lag it will be a small fraction of a second)