Great video, I run a 12 volt setup, it has 7gpm 100 psi pump, i'm noticing when i pull the trigger i get my full distance then within 5 seconds or so my distance drops about 6 or 10 feet, it has 1/2" hose on the reel. coming out of my metering system is a 3/4" hose feeding the pump, i have 1/2" water line and 1/2" bleach line going into the metering valves. Any ideas Thanks
Tim I’m running a shurflow 5.3 90 psi I have a 3/4 inch intake hose running to solution to 3/4 inch feeder hose to a 3/8ths hose reel manifold that had 100 ft of 5/8 flexzilla with a Softwash gun off Amazon the blue gun 16 gpm …I have a hard time keeping that pump with consistent pressure it’s almost like the pressure builds great but as soon as I spray it can’t keep up anything to. Change?
3/4 from the mixer to the pump. 1/2 out. You have to remember the pump is 1/2 and so is the hose reel. I’ve tested other options and we land back at this for the best all around performance.
@@ExpertPowerWashspraying with 1/2" hose or 5/8" hose? Your comment leads me to think 1/2", keeping everything consistent with pump outlet size, hose reel in/out.