13B PPORT RX7 WITH A SELF TUNED SNIPER EFI HOLLEY (Let's go for a ride)

Подписаться 3,3 тыс.

Просмотров 94 тыс.

50% 1

In today's video I go for a ride in Conor Anderson's 1st ten RX7 with an old school peripheral ported 13B with a self tuned sniper EFI Holley. While not fully dialed in it's definitely a very unique (and very new) setup for any rotary engine and this is also one of the first rotaries to run this setup. Eventually I'll be switching to a sniper EFI Holley on my own large streetport 13Bs which should yield some interesting results vs my current racing beat mechanical Holley.
Some more info about this car and it's setup can be found here: www.holley.com...

Опубликовано:

30 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 74

@custombuildrx7242 4 года назад

THE REASON IT LOOKED SLOW THE MAIN POWER WIRE ON JUNCTION BLOCK WAS LOOSE AND WAS NOT CHARGING THE SNIPER EFI LIKES A MINIMUM OF 12.9V 13.5V AND I ONLY HAD 12.0 ON THAT PULL SINCE THEN I FIXED MY CHARGING ISSUE AND IT IS WAY MORE CONSISTENT WHEN I HAVE 13.5V

@Kenneth1350 4 года назад

Dude is running a honda oil filter never thought they fit.

@eduu_re 8 месяцев назад

Im running d16 oil filter in 43 years Starlet 😂😂😂

@sydneyj231 4 года назад

Oh man. His car was 1st Gen goals when I had mine. 🥺

@NateRist 4 года назад

Well let’s get you back into one then

@oldstyleanalog6459 2 года назад

U need gears.Put some 4.44 and u will launch crazy and ur rpms will be comfortable on the fwy.if u put 4.88 oh my god with slicks u will make money with v8s.and 4 cyl cars.u need to lock ur distributor

@jensenredd4939 3 года назад

I met this guy a while ago he’s a really nice guy and the rx7 shoots nice flames

@NateRist 3 года назад

ya he's a pretty cool dude

@atc576 2 года назад

You shifting like my grandma bro

@matl7560 3 года назад

When it asks you “what is the displacement of your engine?” What did you put in? I feel if I said 1.3 it would not like that when I start to need a ton of fuel. (Super Sniper EFI Carb Swapped RX8)

@walterturner3230 3 года назад

80 for 13b 70 for 12a

@josemanuelvargasrivera2050 7 месяцев назад

👌👌💪💪💪

@doppies2001 4 года назад

picks up Revs slowly. standard Engine revs faster than that !

@NateRist 4 года назад

Well he does have an extremely heavy rotating assembly on top of a mostly undialed in setup. The engines in my SA and RX-8 seem to rev and pick up quicker too, but they have lightweight flywheels and rotors are decently lighter on top of being dialed in well. I’d imagine there’s plenty more potential in this with manual tuning, but for being on the self tuned setting I think it did well (plus you can’t really let it rip all the way on public roads, so there’s that too).

@6000pounds 4 года назад

To be fair even though it has newer technology this car would still tear up anything from it's time at old school meets. Sometimes it's not all about being faster than the newer rotary setups. I have a miata nd1. The nd2 makes more power. I'm still happy with my nd1.

@thomashayward94 4 года назад

Matthias Doppenschmied hi I think you’ll find that he was feathering the throttle onto the freeway, if he dumped it it would quite probably scream it’s guts out

@323smurf8 3 года назад

Slow revving might be the waaayyyy too small air cleaner as well. P port motors want a lot of air!

@rx7cl 3 года назад

The pioneer radio is jealous lol.nice

@787brx8 4 года назад

I can run the maximum ignition advance setting for my Mazda Protege. It does not knock at that setting even with 85 octane gasoline. My anti-knock prototype makes it possible.

@MrSchnarr 3 года назад

I'm trying to figure out how his MSD box is wired. The trailing would be running full tilt while the leading is hitting 2 step or limitter

@Deaverboysracing 3 года назад

Wire both into msd box from what I have seen, about to try my hand at it as well.

@l8tapex 3 года назад

@@Deaverboysracing I had one msd on lead , 1 on trailing use in place of stock ignitors.

@janpagan8970 3 года назад

Hermoso sonido de ese motor rotativo 👍

@Kyle-hz9kf 2 года назад

I should drive down from Idaho with my 1st gen seams to be more down there.

@SvoBrianRobles 3 года назад

Guys which EFI Kit could I use for a stock 12a!

@pablorodriguez8663 3 года назад

Nice 79 80 in the background

@ericeberly2247 2 года назад

Kinda wondering why it took 4 hrs to shift lol

@DRIFT_CORE 3 года назад

Wtf is that dashboard

@NateRist 3 года назад

It sure is

@phammotorsportsllctam677 Год назад

what size of wheel u r running?

@SvoBrianRobles 3 года назад

What size tires you running in the back

@theweazelhat5201 3 года назад

The filter on the oil neck, what do you gain from this? Do this prevent the lung butter?

@mfuji02 2 года назад

can you adjust idle with sniper efi?

@damianrivas3366 4 года назад

Hi Nate you should come to Lehi check ou My 85 Fb and 75 Repu.

@NateRist 4 года назад

I’d love to

@damianrivas3366 4 года назад

@@NateRist let me know when your available.

@NateRist 4 года назад

I’m on my way to Vegas and will be headed back up later in the day if you’ll be available then. If not then maybe tomorrow sometime

@JoshRex7ven 2 года назад

Exhaust setup?

@Jib3rish23 3 года назад

Please ask your friend what fuel cell he got and where can I get one ;)

@22c2wofficial2 2 года назад

good sound!

@AnthonysBBQ 3 года назад

Running a little lean on the air/Fuel Ratio?

@Izzy_Havoc 4 года назад

Can the Holley sniper control the timing? Or is it not really for a rotary? Do you think the sniper could handle boost on that engine?

@NateRist 4 года назад

This one is using a standard dizzy, so timing is set normally. I don’t know if it can control timing with a CAS or trigger wheel setup, but I believe there are a few that will be messing around with boost in the near future using a sniper

@Izzy_Havoc 4 года назад

Nate Rist Well I read the Holley can control boost and timing, but with its main focus being piston engines. I think if one were to boost it, you would want the higher horsepower kit that Holley has since it’s a throttle body based system and rotary’s act more like 2 strokes. That’s the only kinda connection that can be made. I’d love to see a 2 rotor with a centrifugal supercharger, water to air intercooler, water and meth. Back it with a powerglide with a high, very high stall converter.

@NateRist 4 года назад

@@Izzy_Havoc I'm not really into boosted rotaries, but the camden setups using a mechanical holley done by Atkins rotary have always held my interest. But with the efi holleys I think they're becoming more popular for rotaries and the more people play around with them people will begin to smooth out the finer details for boosted setups and full manual tuning capability with known results for a particular rotary engine setup

@Izzy_Havoc 4 года назад

Nate Rist So how exactly did you setup the sniper with the distributor? Is the a rotary setting in the programmer setup?

@NateRist 4 года назад

that’s a question for the owner, it’s not my car but I will be switching to a sniper eventually

@chrismanisay 4 года назад

Did I just hear him say drive it around 200 miles? Where'd you find that fuel tank???

@lucasstand8839 3 года назад

My tank gets around 200 miles too

@joegarza2778 3 года назад

Beast🔥🔥🔥🔥

@pilotohernandez1569 4 года назад

Do u running a electric water pump? Look nice keep the good work

@pedro94318 3 года назад

Can tell you both know NOTHING about rotary engine 😂

@NateRist 3 года назад

Nope, not a single thing. Man I sure do wish I knew they worked so I don’t have to pay someone $6,000 just to do my apex seals. Damn, maybe some day I can build my own motor(s)

@seanniegee 4 года назад

Which sniper EFI model did you use on this 13b?

@carlosramos9753 3 года назад

Nice set up

@benjaminmartinez2877 3 года назад

How do you wire the holly sniper to the rx7

@NateRist 3 года назад

That’s a question to ask the owner

@RotartMedia 2 года назад

That's not even a good race interior that's just plain ugly

@richardcenteno2553 3 года назад

Nice setup like the sound hey question how do you have the msd wired in

@NateRist 3 года назад

yes he does

@Grimace_Integ420 3 года назад

Is that utah??

@NateRist 3 года назад

yes

@patbai6331 4 года назад

Nice, I would have warmed it up for a bit longer though

@NateRist 4 года назад

It was already fully warmed up, he just barely pulled up before I started recording

@patbai6331 4 года назад

@@NateRist I sort of was thinking that sorry mate, beautiful setup mint car shes what dreams are made of

@mickleeds9335 3 года назад

Pp? More like a Big bp or Monster...

@NateRist 3 года назад

This engine doesn’t use side intake ports

@IHaveASillyHaircut Год назад

This the slowest PP 13B I've ever seen. Your porting guy knew that the original side ports need to be closed off, right?

@NateRist Год назад

Why do people keep thinking this is my car or that I had anything to do with it's setup? This is a very custom and experimenal setup that still had bugs to work out at the time and the video is just showing the car working with something new to the market

@Amansaguapo 3 месяца назад

They don't need to be closed dumb if youre going to Port it why You Will close the original one for that just don't Port it. If You Port it You don't close the original one. who told You that SO i never go there