14 Band Spectrum Analyzer Part.3 | Acrylic Tower

Подписаться 260 тыс.

Просмотров 4,6 млн

50% 1

Part.3
14 Band Spectrum Analyzer
Acrylic Tower
Acrylic Cutting, size, Arduino Code for Logo & More:
drive.google.c...
Tutorial 7 Band Spectrum Analyzer Version 2 :
• 7 Band Spectrum Analyz...
Tutorial 14 Band Spectrum Analyzer Version 2 :
• 14 Band Spectrum Analy...
eBay :
DMS-307 V3 7Band Music Analyzer module
www.ebay.com/i...
DMS-314 V3 14Band Music Analyzer module
www.ebay.com/i...
DMS-321 V3 21Band Music Analyzer module
www.ebay.com/i...
DMS-328 V3 28Band Music Analyzer module
www.ebay.com/i...
DMS-335 V3 35Band Music Analyzer module
www.ebay.com/i...
www.ebay.com/i...
www.ebay.com/i...
For orders in European State :
please contact the seller at
btschudin@intergga.ch
More Info please contact our seller at
sevenliu1@gmail.com
WhatsApp +6285886373588
/ legendmasters
TOKOPEDIA :
Music Analyzer module
www.tokopedia....
Complete set Acrylic Tower Music Analyzer
www.tokopedia....
Part.1 Video:
• 14 Band Spectrum Analy...
Part.2 Video:
• 14 Band Spectrum Analy...
Part.3 Video:
• 14 Band Spectrum Analy...
Music In This Video :
Track: Tobu - Obstacles
/ tobuofficial
Track: Rolipso - Jumble
Link: • Rolipso - Jumble
Track: Tobu - Infectious
/ tobuofficial
Released by NCS / nocopyrightsounds
Track: Julius Dreisig & Zeus X Crona - Invisible [NCS Release]
NCS: Music Without Limitations
Music provided by NoCopyrightSounds.
Watch: • Julius Dreisig & Zeus ...
Free Download / Stream: ncs.io/InvisibleYO
Track: Tobu - Hope
/ tobuofficial
Released by NCS / nocopyrightsounds
"THANKS ALL FOR WATCHING"

Опубликовано:

29 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 4,1 тыс.

@richa9719 4 года назад

Need to package and sell as a kit

@techoverloadx 4 года назад

Absolutely, I'd buy one in a heart beat! Wish i had the tools to make one.

@TwstedTV 4 года назад

I agree. - I want a 32-Band version

@MindBodySoulOk 4 года назад

@@techoverloadx If it wasn't a gazillion dollars of course.

@gol10dr45 4 года назад

This is so bad ass. I want a few.

@gregoryhudson123 4 года назад

Yes, I would also buy one off you..... That is amazing! Wow wow wow! 😎 👍🏻

@Jacson4100 4 года назад

I want one of this so bad!

@mblendezt 2 года назад

Lot of hardwork here, amazing. Auto Subscribe. Thanks for share the link to learn

@arumnurhidayah775 Год назад

well done Mate, this is awesome

@franco1974ism 3 года назад

gracias por dejar el link de la musica en la descripcion, se te agradece!

@AndrevusWhitetail 4 года назад

How to make this at home : Step 1 : Don't be poor. Step 2 : You figure the rest out.

@Антикоммунист-п2р 4 года назад

Step 1 : Don't be lazy consumer*

@kevinmount5896 4 года назад

I'm nearly there! I just need to get past step one!

@PranatoshTech 4 года назад

Sir , i want to purchase this . How it possible? My WhatsApp number is+91 9851057311

@bawaslutebingtinggi9 3 года назад

this one is more cheaper : ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-J399Rzk2QJ4.html

@noynoy3190 3 года назад

Mr knows all....don't just talk,make some and start selling them otherwise shut up.

@gabrielpanfilo9609 3 года назад

SIMPLEMENTE HER MO SO¡¡¡ TE FELICITO¡¡¡

@rw4pjqradiomaster529 3 года назад

Супер!

@07baya 4 года назад

Es hermoso 💜

@arastanha635 2 года назад

Hello. I like your work very much. Where are you from? How can I get this product? Great

@zivanaf 2 года назад

I have never seen a visualizer that reacts so well to frequencies, amazing did you write the code for that?

@typol1389 4 года назад

Very cool, but the cleaning process is as long as making process

@bkam1536 4 года назад

it needs a dome or an enclosure to prevent dust setteling in between the layers

@2810Mad 4 года назад

Or you use compressed air and you're done in 2 minutes

@MarkDML 3 года назад

hi Platinum, do you ever sell these builds I'm always interested on your work. Great job and you are full of knowledge.

@pilgrim2012 2 года назад

Very good! I like the work done. How much does it all cost?

@edthurber6265 4 года назад

I'll add my voice to the requests to sell this a complete kit.

@adalaminshak1812 4 года назад

Very very good

@AQUASURF 4 года назад

I want this under my tv hooked up to my console... OMG PLEASE!!!!

@x5x 4 года назад

my first thought was " where can i buy it?". great work :)

@e2ki399 4 года назад

same here :D

@MrPaullProductions 4 года назад

This is amazing! Well... I will say one thing: KICKSTARTER. Sell it like Lego kit, all the parts in the box with the printed manual and video manual here, we would just need to assemble it :-). OMG I want it so much :-)

@le_rat_moneur 4 года назад

It would be cool

@infernofury5567 4 года назад

If he offered multiple sizes, thicknesses ("flat" for wall mounting, taller for a club or something, miniature (desktop) variants), I think this is a product that will be very popular!

@ВіталійСуровикін 4 года назад

Была бы возможность поставил бы 1000-чу лайков,очень красиво это шедевр,супер!!!!!!!!!

@blizzardjesus 4 года назад

If there is ever a precut/drilled, ready to assemble kit, I'll get one.

@kimyeonho8455 4 года назад

I run cnc and laser workshop so I can roughly figure out the cost when I see products. you could buy a boss stereo system instead building one of that.

@081318526947 4 года назад

Seller contact sevenliu1@gmail.com

@likulakuku 4 года назад

when you will sell it to public.. i'm interested...

@081318526947 4 года назад

Seller contact sevenliu1@gmail.com

@charlespetrosky2039 2 года назад

@@081318526947 would love one of these. Do you see and if so how much They are awesome

@tuetanitomaple 4 года назад

THIS IS A REALLY COOL PROYECT TO DO BUT WITHOUT THE CNC LASERCUT IS KIND OF HARDER BUT IS AMAZING NICE JOB

@m4c1990 4 года назад

DIY be like.. First you need a Laser Cutter. Yeah, I failed the first step.

@ArdyansahDwi 4 года назад

🤣😂🤣🤣👍

@hcteksnamuh 3 года назад

yeah if you plan to clone that build, but you can always use basic tools like router and table saw to achieve the same effect.

@KjartanAndersen 4 года назад

The most beautiful and impressive project I've seen in years

@diyexplorer8728 4 года назад

Jaw-dropping VU meter project. The best project I ever saw in the first quarter of 2020. Good job!

@taunteratwill1787 4 года назад

"the first quarter of 2020" ???? You're way ahead of everyone? Whahahahaaaaaa!

@sinvaldocardoso3509 Год назад

Bom dia amigo Tem como você me manda o link desse equipamento pra mim pode comprar

@stephaneneron 10 месяцев назад

Not VU Meter... Spectrum Analyzer... Not the same thing at all...

@jebronekitty 3 года назад

I surprised there's nothing like this on the market. I'm definitely not doing my own DIY for this and I can appreciate the craftsmanship, but I wish there were similar products that were purchasable.

@alexr3638 4 года назад

Это лучший и крутейший экв что я видел! Мастер гений.

@MrSonar2000 4 года назад

Схемку бы (

@andyo4462 4 года назад

Вот история повторяется.. в 70х-80х годах это называлось цветомузыка. Все прям были помешаны на лампочках под музыку моргающих, потом даже журналы были завалены схемами, а радиомагазины - комплектами для самостоятельной сборки.. даже я собирал, и для дома на транзисторах и для дискотек на тиристорах (тепловозных :)) И вот 21 век.. увидеть "живую" моргающую лампочку настроенную на определенную частоту - ДИВО ДИВНОЕ! Это не в экране компутра, нубука или селифона видеть.. ДА. Японские кассетные магнитолы с 3-10 диодами на табло ихвалазира вызывали у многих эйфорический припадок.. Что дальше ждать? Реинкорнации эры видеомагнитофонов? Винил уже в тренде.. если чО! ;) :)))

@andyo4462 4 года назад

Согласен с тем что автор "заморочился" с воплощением своей творческой идеи и у него всё получилось. Спору нет. Сама идея стара как мир. Данный видео ролик хорош для тематики "интерьерный дизайн". Моё мнение. С Новым Годом! :)

@alexr3638 4 года назад

@ak7719 ЭКВалайзер!!!)))))

@BLADIMIR2790 4 года назад

@@MrSonar2000 так там есть прошивка для ардуины , думаю вполне реально на основании её понять что куда подключать , а модули все видны на общем фото платы.

@adisharr 4 года назад

This one of those things that I look, think it's cool, buy it, and wonder wtf did I just spend money on.

@imjody 4 года назад

This is freakin' incredible. I want one!!!! I don't think you'd have any problem selling these for like $750-$1000 a piece... You'd probably sell quite a few at $1,500 even. AMAZING WORK. This is absolutely BEAUTIFUL!! I would definitely buy a kit of this for cheaper than the aforementioned prices if it was closer to $500 or less; no question about it!!!

@BOBOY162 4 года назад

I am selling it for 900€. Can be lower if more people would order them from me but right now it is just a few thats why i cannot reduce the price unfortunately.

@imjody 4 года назад

@@BOBOY162 that makes sense! It's beautiful!!

@BOBOY162 4 года назад

@@imjody If you are interested in having one you can email me on mining.germany@gmx.de

@oppof17pro57 Месяц назад

How can i buy this witch web site available this@@BOBOY162

@webmagician 4 года назад

Классная цветомузыка, второй такой нет! Лайк однозначно, проделана хорошая работа!

@wernesto. 4 года назад

а можете определить какой лазерный станок используется на видео для резки орг стекла

@The2Twister 4 года назад

@@wernesto. спроси у автора, думаю на канале должна быть ссылка.

@АлександрМишекурин 4 года назад

да

@matteotubertini3440 4 года назад

Very nice job: do you think it's possible to buy from you one piece of this cool gadget ? If interested please reply to this message and if others are interested we can make a purchasing group 🤔🧐....

@MrSkidzyBH 4 года назад

mood

@wdiprod 4 года назад

I'm interested too!

@one-o-four889 3 года назад

Platinum: Make this yourself First step, laser cutter. Me: D'OH!

@bandido7994 3 года назад

From a DYI person here, it can be done with a regular drill and a jigsaw. More effort but is worth the pleasure of doing a project like this, the only thing is that acrylic is expensive.

@deaultusername 4 года назад

Bigger than was expecting with the dimensions. TechMoan would like this.

@Outland9000 4 года назад

So would beardyman...

@MrPruske 4 года назад

thought the same.

@kevinconant2089 4 года назад

Should be packaged as a kit. Would love to make one for my classroom.

@nicoras8803 4 года назад

Please supply me a unit, I will pay immediately - this could become a very nice business. Please let me know how you would like to proceed. I think we can manufacture and sell several thousands. I will set up an assembly plant. How can we contact and talk.

@cjfaucett3067 2 года назад

I would love to have one of these. You should definitely make this available to sell.

@nicasiosalongajr860 4 года назад

The most beautiful spectrum analyzer display i saw.....i will built my own version too. Nice idea i learn from this.

@santinofmn 4 года назад

A ton of patience and hard working, and perseverance, and creativity and technique, and... I'm tired just in commend... imagine in doing

@U.F.O.Technology 4 года назад

Yes it is more expensive than the Eiffel tower.

@wtmf80 4 года назад

I'm going to build this.. I've already sourced all the parts I'll need and it'll be about $300 all in.

@logicmp4 4 года назад

@@wtmf80 how you doing on it is it In the process of being built or?

@wtmf80 4 года назад

@@logicmp4 I'm still waiting on the module and other parts to be delivered, but everything is ordered.

@d00mfish 4 года назад

@@wtmf80 sou you bought the controller from ebay? Thinking of buidling that one myself. That will probably be the most difficult part of it

@wtmf80 4 года назад

@@d00mfish Yes I did buy the controller module from ebay. It's being shipped from Indonesia so not sure how long till it gets here. It left Jakarta this morning. I was thinking of building the module myself as well, but after sourcing all the parts to build it, the price on ebay is good enough to just buy it already built.

@henrykzajac8001 4 года назад

I'm impressed that the light from leds is not "leaking" to other segments. Overall amazing project and great execution ;)

@bpark10001 Год назад

He is exploiting the scheme that fiber optics uses to prevent light from escaping from the sides of a fiber.

@RasanSamarasinghe 11 месяцев назад

Once I had the same issue when I was making a similar one. I had to cover lights using cellotapes to fix that issue. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Cx3EwPUKW00.html

@ChuckRayNorris 4 года назад

that is one of the sickest things i have ever seen that is a must have for my home theater. INSANE!

@bo0tsy1 4 года назад

The creepy old guy with the trans am said the same at the Chevron.

@rumethsathnidu5393 4 года назад

where can i buy this

@stevenA44 4 года назад

I totally agree with you on that! I'm almost drooling over this. LOL Coolest damn project I have ever freakin' seen!

@jazephlewid8290 4 года назад

Dude,just sell them already you can see how many people want one of these...including me.

@bpark10001 2 года назад

Please beware one thing about laser cutting acrylic plastic: the cutting process is thermal & leaves built-in stress in the parts. Later, these stresses may cause the parts to crack, especially around holes. The solution is to bake the parts after cutting out, slowly heating them to just under the softening point (where the stresses relieve), then slowly cooling the parts back to room temperature.

@Dr_Xyzt Год назад

You're overthinking it. I don't have access to a laser cutter. All I have is a table saw. If I were to make this assembly, I'd consider sending the parts out to be cut on a WaterJet. It'll leave a matte finish on the edges which can be painted to change the performance characteristics. Another option is to use a disc sander to trim the edge of the cut. Another great option is to send the job to a machine shop. A carefully planned cut sequence will leave interesting tool marks in the edges of the cut.

@Dr_Xyzt Год назад

@@bpark10001 That was a pretty sweet pdf link! Thank you. -- I apologize for my earlier comment. I see what the deal is here. When we cut the material, each cut leaves a tiny stress riser, even if I use a nice sharp flycutter with a wiper insert. If I take the part and bend it, then it should fracture right at one of the tool marks. -- I do want to try my disc sander idea. A bit of soapy water is all it requires. -- As for machine shop work, I wanna try an experiment with a small piece. Drill two holes with a 2-flute endmill. Climb cut the other side with a downcut endmill. Flycut another side. Oven cure one piece, leave the other one as-cut.

@bpark10001 Год назад

@@Dr_Xyzt OK. What happens is that the plastic melts in the cut's surfaces, the same as if it were laser cut or "flame polished". The melted plastic cools & shrinks, but is prevented from doing so by the surrounding non-heat-affected plastic. The surface is in tension, where defects are present to start cracks. The worst cuts are the ones that leave sharp "inside" corners, from which cracks grow. Modify geometry to avoid these (for example, for clock gears, put a radius in the tooth roots & on top of the teeth). Keep tool speeds LOW & keep tools SHARP. You can laser cut. The trick is to heat the whole sheet to annealing temperature BEFORE the cut. (You will need to scale up the part to account for expansion). You can see the stress by getting polarizers (cheap pair of polarized sunglasses, remove the lenses, set crossed so is dark to transmitted light, put the acrylic between). If stress, you will see dazzling colors). After anneal, this color will disappear & will remain dark.

@TheSniper1964 4 года назад

In all seriousness that is about one of the coolest things I've ever seen,I'm 55 and seen quite a lot in life.. you should be very proud of yourself for creating such a work of art...and also quite seriously how much would you charge to have one built,assembled and shipped to me ??

@rokyanton3323 4 года назад

Welcome to another episode of if i had those tools :) Awesome work!! appreciate your effort! for those who reading this let's watch for another 30min 'DIY CNC Laser Cutter'

@wormaus-mixed 4 года назад

I jsut remeber, when i see this, in the 80'th i build such toys (not so big and expensive in tech) at the analog way with transistor, condensator, resistor rows and bandpass filters ... 40 years later "its modern" ... :P

@fredk2961 4 года назад

80'th? hobbyists were building them in the 60s with painted lamps and projecting on the walls.

@alicamping24 3 года назад

Please let me know if I can make it 12 bands and the LED length is 2M each.^^

@ЯнСеменов-г4у 4 года назад

Ребзя, все идём к AlexGyver! Там и не такое увидишь)

@vlaomao 4 года назад

Там как раз такое и не увидишь, одни недоделки из ногтей

@АлександрЛюбиченко-н8о 4 года назад

@@vlaomao он кстати на Гайвера подписан...

@fernandomorenosr.210 Год назад

amazing project, I am a fanatic of music. I would love to make one of these. Do you sell the layout pattern for the cutting out of the acrylic pieces? if you do I may be interested. You do great work.

@PLATINUMKIT Год назад

Please check in description

@xH4RDC0R3xG4M3Rx 4 года назад

I need to buy this! If you start selling them or something let me know!

@jakob2882 4 года назад

Haha me too

@Draculax1 3 года назад

buen trabajo amigo crees que podrías hacerme uno igual y vendérmelo por favor amigo soy de Peru.

@antoniogoncalves705 4 года назад

Dude, is there any way you could cut me the parts and send them to my address? I will pay you for all material etc!

@sorinlazar6550 3 года назад

Hello! I would like to buy, is it possible? How much does it cost?

@P8qzxnxfP85xZ2H3wDRV 4 года назад

Should have made this from EndLighten T, which is a special acrylic glass from Evonik that is meant for light scattering when edge lit. In shops it also goes by the name of Plexiglas LED.

@MrXephone 4 года назад

Light scattering for plexi is also named Back Light. It consist in "damage/scratch" the surface in a non-homogeneous way to counter the light exiting the panel with the distance. In such a tiny surface (aka 60mm here) is not needed. But for bigger panel/surface, it provide a nice and homogeneous light density all over the surface.

@pm1741 4 года назад

Not worth the extra cost. Enlighten T is a ripoff.

@russelllopez4171 4 года назад

IMO, the darkness that is on the edges gives it a 3D look and makes the columns look round.

@waltrautwhite8178 4 года назад

Wouldn't change anything. A homogenous light would make it look boring, compared to the current design.

@ckmoore101 Год назад

Good god, that music is effing terrible.

@_SOON_ 4 года назад

1:25 those blocks at the start of the vid is kinda cute.. [ㅇㅁㅇ]..

@thenyfleamarket2098 4 года назад

WHERE TO BUY ?????

@vales8534 4 года назад

xdxddxd

@NoxUmbrae 4 года назад

Pareidolia.

@TheNutnut69 4 года назад

@하루 indonesian

@ObsequiousV4 4 года назад

One of the coolest pieces of tech I've seen.

@rutgerhamstra7086 4 года назад

when do you share ore give privé de adruino servion 2 code. because i,m making one on school with my teacher. great job and I really like your projects, keep it up (;

@andreynesterenko4176 4 года назад

Очень крутая штука получилась, хочу такую же

@GaitaPonto 4 года назад

love it. I would only change the base for a nice wood block and get rid of the "spectrum analyzer" label

@AQUASURF 4 года назад

Awesome but, who has that machine in a garage - so ... how much it cost If I wanted one delivered ?

@redrooster1908 4 года назад

@brainbah look in the see ?

@Stephan94xD 4 года назад

@@redrooster1908 go on the video description

@bawaslutebingtinggi9 3 года назад

i think this one is more cheaper: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-jjDlyvxcKek.html

@EGORka140764 4 года назад

Beautiful project. I wonder how much everything weighs in assembly? Acrylic layers the best solution from the previous project ! :)

@julientetrel1016 3 года назад

WoW ! Crazy work ! Love how all of this is clean made ! Good wiring, superb result. You should sell some of these !

@killerbeast_lp 4 года назад

damn man this is incredible! Who ever dislikes this, is stupid!

@sapperdeflap 4 года назад

It's probably due to the f*ing annoying music underneath this video.

@BlackRNGesus 4 года назад

@@sapperdeflap and the awful installtion of the pcbs....like putting screw heads almost direct under big solder joints or just bending the pcb over a piece of acrylic...he got so many washers why not getting 4 plastic ones too

@webcrawler5548 4 года назад

I was trying to expand the "show reply" link and accidentally hit the dislike icon. Luckily, I realized what I've done and unclick it. Go figure!

Год назад

Que top ❤

@southernsoundpulse 4 года назад

Enjoyed even with the ads! What a craftsmanship, excellent!!

@HannahWalters 4 года назад

- techmoan has entered the chat -

@coreydufeal2778 4 года назад

Job, well done.I'm impressed! How about selling these as a kit that persons can order and assemble on their own.

@StickySli 4 года назад

Could easily be sold for over 500$ just from the acrylic, pcb's and software.

@joseantunes 4 года назад

@@StickySli oshpark.com/shared_projects/VO7699gb

@joseantunes 4 года назад

oshpark.com/shared_projects/VO7699gb

@namdream5172 Год назад

Cho e hỏi loại đèn led này là loại full màu phải kg ạk..mua ở đâu vậy ạk..thanks a ạk

@iburbon 4 года назад

#Гайверсделай а ну-ка лайкаем чтобы Саня заметил 😏😉

@iburbon 4 года назад

@KoSteT нравятся его супер подробные видео.

@MrZorro441 4 года назад

@@iburbon куда уж подробней то ....

@iburbon 4 года назад

@@MrZorro441 люди как видишь лайкают. Значит хотят такой проект от сани. А то он свой эквалайзер забросил🙁

@Dobry-Ehh 4 года назад

Пластины из акрила, меньшего размера 4×6 обойдутся 12.000р, если делать самому, из эпоксидки то 7000р, но мля 280штук лить..

@syorezko 4 года назад

@KoSteT тут не каждый сможет повторить, так как всё разбросано, тот кто шарит найдет, или покупать его модуль на ебэй за 70 бачей, а кайвер разжуёт для каждого

@billymilligan0104 4 года назад

Это просто шикарно! Красота какая!😲

@InunNajiIzzuzzusuzzk 3 года назад

@srimantadolui244 3 года назад

I want buy this product

@mghaisan1165 4 года назад

Mantap bang.. Sedikit saran ,coba ditambah heatsink/plat aluminium untuk meredam panas LED...overall keren dan bangga untuk +62😎

@robduncan2816 3 года назад

THIS is why i pay my internet bill. this might be the effing coolest thing ive ever seen

@alphakernel1 4 года назад

would be cool to add scrolling text like track title or whatever. maybe dancing shadow figure effect

@listofromantics 4 года назад

I'd buy this in a heartbeat!

@ionutvali5295 4 года назад

Me too

@greenlantern1123 4 года назад

Me too

@85ctorres Год назад

i can't believe people actually consciously select music like this. it's absolutely terrible.

@milanstastny6799 Год назад

This music is for free, no copyright.

@dxpxrtxr 4 года назад

u would make millions of $ if youre would sell this set done

@mutzbunny 4 года назад

no he wouldnt, he fergot to pit in a audio out. so you can not so easy listen to the music while analizing in on the specrtrum analizer xD

@thim0 4 года назад

@@mutzbunny that's such an easy thing to add lol

@urraaa2937 4 года назад

Imagine you have 14 building and turn them like this

@jaydawg7820 4 года назад

Man, that is just about the Coolest Damn Thing !

@johnwilmington631 3 года назад

I would replace my fireplace with it.

@awesomeregularnormalguy9826 Год назад

I build this with my own adjustments for my wife's father. Thank you for the inspiration. Took me quite some time though.

@AlexVillaNova 3 года назад

My God, I can die after do one like this ,,, where do you sell this? Congratulations from Brazil!

@Drxxx 4 года назад

Amazing project!!

@BuiCaoDao Год назад

Tôi thắc mắc là nó nhận dải âm tần và điều khiển nháy đúng cột led đó như thế nào ?

@kawawete 4 года назад

Are you thinking about producing this beauty for sale or just keep it as a baller project ? :) (A damn fine job tho)

@DonLafontaine62 4 года назад

I cringed when I saw the soldering job.... Nice project though, thanks for all the details.

@alexbke1971 4 года назад

Возможно и часы сделать . Чтобы не просто стояли когда музыки нет , а время показывали ;)

@Sergey-Alekseenko-qk6mf7te7j Год назад

Сколько материала переведено! А пылюку со стекляшек как потом счищать???

@chriswisselo4329 4 года назад

Platinum, you keep amazing us with amazingly beautiful and elegant projects. I WANT ONE FOR MY HOUSE! Happy new year and please keep the nice videos coming. Subs +1

@PLATINUMKIT 4 года назад

Thank..Happy new year :)

@ryanmadula6308 Год назад

@@PLATINUMKIT how much for assembled set?

@marcosgiovanni9682 4 года назад

Shares the complete code with the tuning buttons and circuit board. Do you sell only the code and circuit board?

@PLATINUMKIT 4 года назад

you can download arduino code in part.1 video. if you want complete spectrum module can buy at ebay.com please check in the description

@atomipi 4 года назад

@@PLATINUMKIT v2 arduino code link for me to try a build?

@MrEvilboogyman 4 года назад

Do you make these for sale? Definitely interested

@NakedGeep Год назад

Do you think the lights at the top ever get jealous of the ones lower down?

@prafullarwade 3 месяца назад

😁😁😁

@plixx4815 4 года назад

This would also look nice in a club. Thought you could sell some of this. How ever, really gread work

@СергейКоняев-с2я 4 года назад

опять тоже самое! Зачем питание сверху выведено? Подключить питание всех столбцов только внизу к горизонтальной шине!

@СергейКоняев-с2я 4 года назад

@KoSteT если вы смотрите внимательно ролик, то такого бы ответа не было! Смотрите внимательнее! Даже схема присутствует!

@DeepThinker193 4 года назад

This build is so easy, I can do it in my dreams...only in my dreams.

@michalja4265 3 года назад

Hello. where can i download firmware for arduino mega 2560 pro as in dms 308 v2?

@huyked 4 года назад

BEAUTIFUL! I've always loved spectrum analyzers.

@GavriLOW 4 года назад

Arduino Code Spectrum Analyzer ?

@belikstas 3 года назад

How much money need to build one? Exelent job. I need one!

@erwinrommel4561 3 года назад

What in gods name is that for a terrible dissonance ? You use all this time and material to build this impressive EQ display, and then you play that Mickey Mouse shit ?