Replacing the ink pump of a DTF printer usually requires a certain amount of technical knowledge and operating skills, the following are general guidelines:
Power off the printer: Before starting the replacement, make sure the printer is turned off and disconnected from the power to avoid electrical risks.
Open the printer housing: Locate and open the housing or cover of the printer in order to access the internal components.
Locate the ink pump: Locate the ink pump inside the printer. The ink pump is usually located as part of the ink supply system.
Disconnect: Disconnect all wires and hoses connected to the ink pump before removing it.
Remove the old ink pump: Use the appropriate tools to remove the screws or clamps holding the ink pump in place, and carefully remove the old ink pump from the printer.
Install the new ink pump: Place the new ink pump in the appropriate position and fix it as before.
Reconnect wires and hoses: Reconnect wires and hoses to the new ink pump, making sure the connections are correct.
Test the new ink pump: Reconnect the power supply and perform the necessary tests according to the machine's operating manual to ensure that the new ink pump is working properly.
Precautions: Keep your hands dry during operation to avoid the risk of electric shock. If you are not familiar with electrical maintenance, it is recommended to operate under the guidance of professional personnel.
7 сен 2024
