15 Amazing Tricks with DRILL that EVERYONE should know 

"This video is an absolute game-changer! The tip about using high speed for wood and low speed for metal is incredibly useful. It's amazing how such small adjustments can make such a big difference in the results. Thanks for sharing these practical tricks!"

For the most part, the video is very helpful. When drilling through steel, use slow speed as you have shown but also use bees' wax or a drop of cutting oil to extend the life of the drill. At 6:25 you should use vise grips to hold the cap (or disc or washer) to keep it from rotating and preventing possible injury. At 9:30 the zip ties with dowel is a great idea and along with that you could use a 3/16" center punch (or drift punch) and poke about 4 to 6 holes along the rim of the paint can so that excess paint along the rim can drip back into the paint can. At the same time you could have shown how to make a dowel using the electric hand drill but that could be for your next vid. They say "genius is common sense applied" and you are there. THANKS for your vid and keep them coming. If 2 or 3 tips are helpful then you are successful so press on.

Very good tip dear friend.

From Bengkulu Indonesia

Very good video. Thank you. From Brasil

Well it's ALL common sense really...

素晴らしい日常生活気が付かんことばかりこんなにも便利になる。

What the heck.. Average human should be able to think all of this

I didn't know not to wear gloves is a trick 😮

This video is a game-changer! The way you explain everything makes it so easy to follow, and I love the variety of ideas you shared. Definitely trying these out! 💯🙌

Thanks for your good information.

10/15之前有播過，汽車撐高太讚❤

"These tips are fantastic! It’s amazing how small adjustments, like changing drill speed for different materials, can make such a big difference. I had no idea that using a wrench could help with getting precise 90-degree angles. Thanks for sharing these practical tricks! 🌟🔧"

Your videos always compel me to explore new creative realms. Thank you for sharing!🥰🤩

برای نریختن خاک چوب به جای کاغذ از جاروبرقی استفاده کن

The more I watch this the funnier it gets 😂

Very simple and useful ideas that can come in handy in the house. Thank you!

Amazing Hack of a very smart drilling machine, makes our work easier 🎉🎉

رووووووعة❤❤❤❤❤❤❤❤❤

All user manuals have the correct proceedures and should have been read before using the drill

Hello from Sweden! Thank you for all of your tips❤

Last item does not work as it shows.

بسیار عالی وکاربردی سپاس از شما🙏🌹❤👍

Half the fun of these tips and tricks types of videos is to guess what on earth the tool is going to be in the end.

What a bull shit😂 as helping recommendations.

Ich bin aus Deutschland dem Land mit hervorragenden Werkzeugen. Bosch, Fein etc.

ببخشید ولی بعضی ازترفنداتون کاملاً اشتباهه چون سری چهار سو درمیره میخوره روانگشتاتون خودم فنی کار هستم چندبار دیدم سری چهارسو در رفته روناخن سوراخش کرده. با احترام ممنون از ویدیو هاتون🇦🇫

VERY usefull! I love your channel...🇮🇹

Thank you for your videos. I have watched several, and I must say that they would be more enjoyable without the music.

Wonder if there's a impact (another drill like contraption) video?

I like this one , do u got anny tips on how to sharpen the bitts, it would help

Wtaf…..catching debris with post it note 🤣🤣🤣….stop faffing about and use cordless hand held vacuum against wall as you drill

Italia h 0005

If you don't use an ammonia-based cleaning LIQUID SOAP (not CREAM), as a coolant and lubricant whilst drilling into metals, you will never appreciate what a superb addition to your work it is! I have tried almost everything, but this beats everything else on the market. Bits remain cool through the toughest jobs, retain their edges much longer and a few drops go a long way. If you place a plastic container under the work to catch any drips, place a magnet under the dish for iron-based metals. Then pour off the clean fluid and reuse it. Remove the magnet to clean the dish. No 3 makes no sense to me. I NEVER drill horizontal holes for hanging things, but drill downward into the wall. this causes the nail, etc to angle upward. Nothing ever falls off the walls in my house, even during a heavy tremor.

The tip at 02:58 about not drilling at too high a speed and never changing speed while the drill is running was super helpful! It's something I hadn't considered before, and it definitely improves control and precision. Thanks for sharing this awesome tip!

😅

3. you can clearly see its not level. Because if it was the spanner would move with the thread of the drill bit

😄😄😄

People been that for years

ایران

There are very stupid things like stirring the paint with anything, the paper on the wall to collect the trash and the compa

Use an awl or a punch first to drill a hole, as it will keep the bit from wandering.