15 wrx p000a issue SOLVED!!! 

Just got the issue, came here and got all the info. Quick and easy. Thank you.

For anyone the needs that info: P000A "A" BANK1 - Passenger Side Top P000B "B" BANK1 - Passenger Side Bottom P000C "A" BANK2 - Driver Side Top P000D "B" BANK2 - Driver Side Bottom

So my 2015 sti is getting p000d (exhaust cam slow response) every day or 2 so I’m gonna try replacing the oil control valve for both exhaust sides

I have a P000C code on my subaru 2015 wrx but I am always on time on my oil changes and never late, I dont race my car or mistreat it.

Hey man! I am experiencing this problem now. P000B is my code. My oil is clean and full and religiously changed every 4-5k. The current oil in it is less than 2000km on it. So it’s clean oil. I suspect a bad oil control valve on that cam. I’ve been reading that these codes can burn into your ecu as well apparently? Did you have any issues with the code returning after you replaced the oil control valves? I’m seeing some people have to get the ecu updated at the dealership or replaced. Not very often but it seems to happen. Thanks!

Can you provide the part number? Great video BTW!

Thanks 4 this. Just got this code. 🍻

I got p000B on my STI how can I interpret the data log

Bro a fucking legend I hope y’all got married

What about P0018? Intake cam 2 LH? Would this fit. The problem? Please advise

A quick question - did ur car fluctuate, run unevenly, when started? After a moment it would go away but initially it would be kinda rough. I got the code, the car shook but then the code went away and i have these weird starts. Thnx in advance

how bad an idea is it to drive the vehicle around with this code? i can't get the part for at least a week and the dealer has no spaces available for the same amount of time either.

I have the same car 2015 wrx sti p000D and it’s a permanent code as it says on the scanner . But my question is which valve would my code be for

For those reading in the future you don't have to change them both. Each code p000a b c or d is to a specific area. Bank 1 is passenger side. Top is A lower B, driver side top is C and lower D

Can also be a cam sensor under those codes and would also link to the corresponding area. Easy test method is to switch the sensors. If the code changes from A to B C or D you know it's that sensor you just moved

Thank you for making this video! I also had P000D and initial wanted to replace the Cam Shaft Position Sensor. but it was the Oil Control Valve. Make Some More Vids, You are great!

Should have cleaned the solenoids. The plunger didn't move freely. There is no point to change parts if they are good.

I got a p000b, what do you think will be the likely cause camshaft position sensor, camshaft VVT.

Thanks for posting this video. I just got this exact code on my 15WRX. I’m hoping if I replace the sensors that will fix it. Have you gotten the codes back since you posted this video?

Thanks! Do you know if there was a torque spec on the two bolts?

What about p000c ??

What parameters were you logging when you realize it was the oil control valve

i changed em all out now it give mes a p000c and a p00021