#159

Подписаться 22 тыс.

Просмотров 208 тыс.

50% 1

After the last Ford 8N video, several people asked for a Ford 8N how to start and operate tutorial. Here you go! #Ford8N #Howto
Step 1: Open fuel shutoff valve
Step 2: Disengage PTO lever
Step 3: Set throttle
Step 4: Choke (if cold)
Step 5: Be on the tractor to start (brakes on, clutch engaged)
Step 6: Transmission in neutral
Step 7: Turn key to "ON" position
Step 8: Press start button until tractor starts
Step 9: Press choke back in
Step 10: Adjust the throttle
Please subscribe to our channel here: ru-vid.com...
Follow us on Facebook and Instagram. Just search for "Purple Collar Life"
Don’t forget to subscribe to Purple Collar Life and enter for our milestone giveaway prizes. More details below. (Note - subscribers must be set to public, and be from the continental United States to win the prizes.) Please promote our channel, so that we can get to the milestones faster.
Feel free to donate to our channel:
www.buymeacoffee.com/purpleco...
Any giveaway on this channel is not sponsored by or affiliated with RU-vid, Amazon, Toro, Artillian, Curtis Industries, or any other manufacturer or retailer. It's just a thank you from us, to a lucky subscriber.
RU-vid Community guidelines:
/ howyoutubeworks
The content of this video is intended for entertainment purposes only.
Clicking on the affiliate links does not cost you any more, but does give us credit for sending you to Amazon.
Amazon affiliate links:
Other Ford 8N Videos on our channel:
Ford 8N plowing snow: • #156: Why Back Blades ...
Ford 8N Stabilizer bar install: • #89: Ford 8N Tractor s...
Ford 8N wash and wax: • #71: Ford 8n tractor w...
Ford 8N brush hog: • #69: Would the bridge ...
Maybe the best tractor ever Ford 8N: • #64: Maybe the Best Tr...
Thank you for your support.
Email: purplecollarlife@gmail.com
#purplecollarlife
Equipment and toys we use:
Toro TIMECUTTER zero turn with 60-inch fabricated deck, 24.5 hp Toro Commercial V-Twin engine
Ford F350 Super Duty Diesel 6.0
Ford Expedition
Chevy Volt
Jeep Wrangler JKU Winter Edition
Yamaha XT250 dual sport motorcycle
Polaris Ranger Crew side x side 500
Club Car DS Gasoline Golf Cart with MadJax rear seat and platform
Honda Foreman 450 ES
John Deere 2210 compact tractor with front-end loader and mid-mount mower
Stihl MS290 Farm Boss chainsaw
Stihl MS271 Farm Boss chainsaw
Stihl trimmer FS55R
Stihl blower BG55
Stihl Pole Saw HT56C
Husqvarna push mower
Craftsman push mower
Correct Craft Sport Nautique
Coachman Chaparral 5th wheel
Car Mate enclosed trailer
Toro Power Max 828 HD
Artillian 3000# John Deere Pallet Fork setup with 36" forks.
Artillian Grapple
Artillian 3rd function diverter kit
Artillian 60 inch snow plow
Other channels we love:
Outdoors with the Morgans #outdoorgans
Keep Your Daydream
Less Junk More Journey
All About RV's
GP Outdoors
BILLSTMAXX
Changing Lanes
Getaway Couple
Pittsburgh Dad
Tractor Time with Tim
Hometown Acres
Good Works Tractors
Stoney Ridge Farmer
Messick’s
Tony's Tractor Adventure
GP Outdoors
Eastonmade Wood Splitters
A Ritter Bit Will Do
Hometown Acres
Published March 6, 2021
Current subscriber count at the time of upload: 2985
Purple Collar Life is a privately owned channel and part of Education Situation Specialists.
Sponsors: Toro, Artillian, Curtis Industries
0:00 Ford 8N Tractor
2:11 Introduction
3:05 Ford 9N, Ford 2N, Ford 8N
3:51 Tractor personality
4:17 Step 1: Open fuel shutoff valve
4:38 Step 2: Disengage PTO lever
4:55 Step 3: Set throttle
5:16 Step 4: Choke (if cold)
5:45 Understanding the brakes and clutch
6:50 Step 5: Be on the tractor to start (brakes on, clutch engaged)
7:10 Step 6: Transmission in neutral
7:26 Step 7: Turn key to "ON" position
7:41 Step 8: Press start button
8:05 Step 9: Press choke back in
8:19 Adjusting the throttle
8:33 Understanding PTO and 3-point operation
11:38 Parking brakes
12:16 Tractor transmission - gear selection
13:31 Using the clutch
14:11 Click LIKE
15:11 Tractor drive (mud and snow)
16:49 Please leave a comment about your tractor experiences

Хобби

Опубликовано:

23 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 397

@PurpleCollarLife 3 года назад

Please subscribe to our channel here: ru-vid.com Follow us on Facebook and Instagram. Just search for "Purple Collar Life" Check out our older videos for more information about our John Deere 2210, tractors, chainsaws, firewood, RV camping, rural living, and more!

@kennethkuykendall3323 2 года назад

Kenny

@greggd2027 Год назад

This sure brings back memories. My grandpa had an 8N on his ranch. I was driving it by the time I was 9 or 10 years old. At that age I had even learned how to back a trailer up with it. The only thing he wouldn't let me do was to tow the disc harrow - he was afraid I'd fall off backwards and get chopped up in it. There were so many things we did with that tractor on the ranch. I think the craziest was using it to gas gophers. He had an exhaust flex hose - we would hook one end to the exhaust pipe, and bury the other end in an open gopher hole, crank up the throttle, pull the choke out, and watch the fumes come out of another hole several yards away. Then we'd cover up that hole and run it a few minutes. It worked believe it or not!

@PurpleCollarLife Год назад

Thanks for sharing a few of your memories with the 8N! We love hearing the stories about these old tractors. They were certainly a part of the family.

@allenfarmer6491 Год назад

Me too! Only I was about 12yrs .......first tractor I learned on ...pulled the hay rope first, then graduated to pulling the manure wagon (after loading it)that is. Many fond memories of the FORD 8n

@PurpleCollarLife Год назад

@@allenfarmer6491 There are so many great stories of these tractors being a part of people's lives and driving adventures. :)

@scottloftin1730 6 месяцев назад

Thats hilarious

@rand49er 6 месяцев назад

My grandpa had an 8N. I can't tell you how many hours I sat on that pretending I was driving it. I was 6 or 7 years old, and that was in the mid '50s.

@PurpleCollarLife 6 месяцев назад

I remember many hours sitting on this tractor pretending I was driving it as a young boy. Now I drive it for real - but it's still just as thrilling!

@thelittlehouseinthecountry7089 3 года назад

Your 8N tractor content has been so useful to our household. Thank You for your hard work of sharing.

@PurpleCollarLife 3 года назад

Great to hear! Thank you for letting us know! Tell us a little about your 8N. We love to hear the stories.

@thelittlehouseinthecountry7089 3 года назад

@@PurpleCollarLife I will soon have a video with our experience with this amazing machine, for now I have a few tips on servicing the front loader it came with. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Boffrh-oiN0.html

@TJSteele63 Год назад

Great video. I just purchased a Ford 8N about two months ago. Started nicely at the sellers and took it home. Drove it off the trailer and it stalled never to start again. After redoing the entire wiring system, still nothing. Followed that by replacing the spark plugs, cables, points, distributor cap and coil, (older 6V system, horizontal distributor model), patched the gas tank and also had to replace the leaking radiator, i finally got it running. Hurray!!! I was doing the happy dance. Previous owner had a bucket installed on it and he warned me it didn't work. He was right, so that's the next project. I watched Rachels videos on the hydraulics and will get that going i'm sure, thanks for showing me how to troubl;eshoot it. Even after all this, i love this little gem...

@PurpleCollarLife Год назад

You’re absolutely right, there’s just something about these old tractors. Even when they’re not running perfectly, and force us to get our hands dirty fixing issues, they’re still loved. Thanks for watching! Keep us posted on your Ford tractor experiences.

@airman20012001 4 месяца назад

Same story, but I have no idea why it won't start, do you know what it ended up being? electrical, fuel?

@TJSteele63 4 месяца назад

I replaced just about everything electrical on that tractor. New rad also and a bunch of other things. Went from a 6 volt system to a 12 volt system. I think the problem with mine was the coil and i think i still have the 6 volt coil in there which will be a big problem on the points. From what i hear, it's stalled again and will not start. I also bought it for the bucket which i was never able to get working. What i'm thinking is that the previous owner might have had a PTO hydraulic pump to power that but it has been stripped before i purchased it. I taught it was just a little thing to repair when i bought it, but i seriously don't have time to work on it for a bit.

@jeramiakins6232 Месяц назад

Thanks for the video. Just bought an 8n and brushhog to use to mow around the farm

@PurpleCollarLife Месяц назад

Have fun! Did you see our brush hog videos? ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-lac1uZp258c.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Y8LcQbfueSY.html

@AkDadStuff 3 года назад

Heyhey Chad That old tractor looks great. I remember when I was back in your neck of the woods having lots of those tractors around. I used to use one to pull hay wagons in the fields. Great memories. Thanks

@PurpleCollarLife 3 года назад

You're right, Mike. 20 years ago, I'd see them all over the place. They're starting to get more rare now (in running condition). Thanks for watching and commenting!

@ritterjon 3 года назад

💥 Funny how every motor has a different starting sequence. Great looking tractor. *Keep on tractoring!*

@PurpleCollarLife 3 года назад

Thanks 👍

@randycole9008 13 дней назад

Thank you for the Video. Very helpful. Now I'm good with using the 3 pt. levers to raise and lower.

@redmann31567 Год назад

Great video!!! Thank you!!! I have a very early produced 8N.... Late 1947. Cold or hot, pull the choke with half throttle and she will not let you down!!! 😁😊👍 🚜❤

@PurpleCollarLife Год назад

Right on! Great old machines.

@1stanleygirl 2 года назад

We may be getting my dad's 8N soon...and I know nothing about tractors (those came along AFTER I was out of the house, unfortunately). This has helped me feel more confident about starting out with it. From a newbie, thank you very much for posting this!

@PurpleCollarLife 2 года назад

Thanks! You'll love the 8N. Feel free to send us any questions you have. Thanks for watching and commenting. We look forward to hearing from you in the future.

@austinwillingham7208 Год назад

Thanks for this in depth video!! This saved me a lot of guess work while working on an old 8n

@PurpleCollarLife Год назад

Glad it helped! These old Ford tractors are amazing. Which version (year) of the 8N did you get? One like ours with the front distributor, or one with the side-mount distributor?

@davida.p.9911 3 года назад

My grandfather had a Ferguson FO20, very similar to the Fords. Very reliable and simple tractor to operate. I have many fond memories of it. It still had its original 6 volt system, and you're right, it took a while to start up...lol. Thanks for sharing!

@PurpleCollarLife 3 года назад

Thanks for sharing

@rovertv7902 3 года назад

Thanks for the tutorial! Always wanted an 8n just for fun. Although my current small Wheel Horse does what I need. At least if I decide to look at an 8n for sale I'll know how to run it!

@PurpleCollarLife 3 года назад

Thanks for watching and commenting! You should certainly consider getting one. They're a lot of fun and a great piece of history.

@jonsey3645 2 года назад

Thank goodness I found you! I bought an 8N last month and ordered the manuals from Steiner but you are the best resource I have found. Thanks.

@PurpleCollarLife 2 года назад

Glad you found the video! We love our 8N. Do you know what year yours is? Is it an older one like ours (distributor at front of engine just behind fan), or a newer one (distributor on side of engine)? Hopefully our video helps you get going. They are amazing machines. Keep us posted!

@kennethbailey2616 2 года назад

I love my 8N. Converted it to 12v. I used one as a boy in the late 50s and most of the 60s.

@PurpleCollarLife 2 года назад

The old Ford tractors (9N, 2N, 8N, Jubilee, NAA, 600 series, 800 series) certainly did a lot of work for families and farms from the 1940's through today. They're great machines. Thanks for watching. The 12V conversion is certainly a great upgrade!

@vovviel3049 5 месяцев назад

You are a gifted teacher.

@PurpleCollarLife 5 месяцев назад

Thank you very much. That's so kind.

@AnthemBassMan Год назад

Love the video! I cut my teeth on my Grandpa’s ‘52 8N and ‘46 Ferguson TO-20. He had a 197 acre farm here in eastern central, Tuscarawas County, Ohio. Spent a lot of years hauling firewood from the bottom of the farm where part of the old Ohio-Erie Canal ran through. Lots of memories on that old piece of property.

@PurpleCollarLife Год назад

Thanks for sharing your story! Sounds like your Grandpa had the right equipment for the 197 acre Ohio farm. And you're right - these old machines certainly carry with them lots of memories. Thanks for watching and adding the comment.

@RockhillfarmYT 3 года назад

Great video idea. Definitely a learning curve for people who have only used a new hydrostatic transmission tractor My dad had an old farmall that I brush hogged with a few times as a teenager

@PurpleCollarLife 3 года назад

Thanks for sharing!

@yvettablack1945 10 месяцев назад

Hello I'm a first time tractor owner, with no help on how I'm supposed to keep a tractor or anything. I bought a 1956 8N looks alittle ruff but does run, just getting it out for this summer. I saw this video n said I think I might learn a thing or two from here. Problem 1 it came with no manual n problem 2 I don't know what's what on this thing. Like a dip stick looks like water got into it. Is that to oil or transmission. Have a friendly ❤ n help a girl out. I want to learn n would really love to even find ways to make her pretty again, the tractor lol. Wantta be a farmer

@kennethbailey2616 2 года назад

Great video. I farmed with an 8N in the 60s and I just bought a restored one and thought I could use a refresher. I farm with JDs these days along with a couple of Oliver 1555s and a Case IH. The Ford is gonna be my little fun tractor. I still have to go pick it up.

@PurpleCollarLife 2 года назад

Thanks for sharing! We do really like having the Ford 8N around. For a long time, we made hay and took care of the horses with it and the Cockshutt 540. Now the 8N is mostly used for clearing driveways, hauling firewood, and miscellaneous tasks as needed. I use my John Deere 2210 for front end loader tasks. Sounds like you have a nice collection!

@scottford5561 2 года назад

Newbie says thanks. VERY helpful stuff!

@PurpleCollarLife 2 года назад

Glad to help!

@Grandassets 8 месяцев назад

Ran across your video searching 8N, in the past I have owned a few different tractors, in Georgia I was on over 300 acres ... you have to have more than one tractor for many reasons, now I am back in Upstate New York on a little less land a smaller one will do just fine, I just traded a 1971 Ford 3/4 ton 4x4 to a friend for an 8N thats been in his family I am sure its one owner, it has a spark coil issue but I am pretty good with equipment so that shouldnt be an issue for me, its an early model with the Dist up front, cant wait to get it this week, clean it up and change the oil LOL get it ready for winter snow plowing :) it will be a great tractor for my 15 year old to learn on too, he will learn to work on them and get the feel for using different tools with them, I think it will be fun! Easy to work on, tons of cheap parts cause its been around so lone and there are lots of them still in service!

@PurpleCollarLife 8 месяцев назад

Great job scoring one of these nice old machines. I agree - a perfect tractor for your 15 year old to learn to work on. Congratulations! Keep us posted on how things go.

@wherenorthbegins7831 3 года назад

Hi PC Life! I found your channel after I saw you commented on one of the videos on my channel. Love the 8N video, brings me back to being a kid. My dad had one of those when I was growing up and it was the first tractor I ever drove. Nice work!

@PurpleCollarLife 3 года назад

Thanks for the sub! We do love that 8N. It's amazing how many people have had similar statements to yours - that the 8N was the first tractor (or maybe even the first piece of any equipment) that they ever drove. Great machines for sure.

@TonysTractorAdventure 3 года назад

I love the old 8N. I have one to rebuild when time permits.

@PurpleCollarLife 3 года назад

I'm looking forward to seeing it. Thanks for being on the live with us last night!

@dirtnbeer Год назад

Just bought one of these. Was curious as to how everything worked. Thanks! Great little video.

@PurpleCollarLife Год назад

Great to hear!

@dejavu666wampas9 2 года назад

Thanks so much. Ever since I grew up on the farm, even as a child, the Ford N tractor has been a favorite. I just liked the look of them. Low center of gravity compared to other tractors. I’ve never been able to operate one, though. I truly enjoyed this tutorial. We had an old 1932 Allis-Chalmers, with a crank start. No electric start. I learned early about where to put your thumb while cranking. Outstanding video.

@PurpleCollarLife 2 года назад

Glad you liked it! The crank start machines can certainly be knuckle busters (or worse!). But there's nothing like these good old reliable tractors.

@user-np4xe3sv3f 7 месяцев назад

Thorough and logical tutorial. Thank you.

@PurpleCollarLife 7 месяцев назад

Glad you enjoyed it! Please Consider helping our channel grow by clicking that subscribe button and watching our future videos.

@disgruntledmarmotcustomsan1530 2 года назад

Just got an 8N today. Great video 👍

@PurpleCollarLife 2 года назад

Awesome! Thank you! You'll really like the 8N. Any idea what year you have?

@MW-nOttawa 2 года назад

My friend just gave me one of these - it was on a property he bought. Thanks for showing me the basics on how I might get it started and moving!

@PurpleCollarLife 2 года назад

That's excellent that you have a friend who was able to give you one. Keep us posted how it goes. Does it run right now?

@javiergutierrez7136 2 года назад

Cómo se ajustan los frenos de un 9n Saludos desde sur tamps.mex.

@nathancudzilo7739 Год назад

Absolutely awesome, nice video just picked up a 1949 , Love the Buffalo Bills hoodie

@PurpleCollarLife Год назад

Thanks for watching!

@CLamb385 2 года назад

My b3030 burned down recently and I’ve been looking at one of these to replace it for a budget friendly option. Thanks for the detailed video. Now I feel like I can go get one and not be completely lost. 😂

@PurpleCollarLife 2 года назад

Glad it was helpful! Sorry to hear about the b3030. Thanks for watching and leaving a comment.

@Johnysoutherner 2 года назад

Looking at buying a 1949 red belly, would be my first personal tractor as we continue to build our homestead. I'm not entirely new to tractors, played on an ol' 8n when I was a kid but, I really needed this video so with that said thank you so much.

@PurpleCollarLife 2 года назад

Thanks for watching and commenting! You'll love having an 8N on the homestead! Keep us posted.

@andrewseamans1419 2 года назад

Great tutorial! Thanks

@PurpleCollarLife 2 года назад

Glad it was helpful!

@jchlawncare5730 Год назад

I bought a Ford 8N 2 years ago. Paid 1250 dollars for it. I use it to haul firewood and to pull my wood splitter around my wood lot. Best investment I ever made

@PurpleCollarLife Год назад

Great buy! They still go for around $2500-$5000 around here for one that runs reliably. They’re certainly great machines.

@jchlawncare5730 Год назад

@@PurpleCollarLife the previous owner let it sit for a year and when I went to buy it he put some starter fluid to it and took off. Beings I cut and sell firewood it works great for hauling wood out of the woods because I get get the trailer and tractor in tight spaces in the woods

@jchlawncare5730 Год назад

Going to be posting a video soon doing a start up video

@rpatterson1 3 года назад

My Dad had an 8N. I spent many a summer day up on it working fields. Wish I could ride it again but the old gal is long gone.

@PurpleCollarLife 3 года назад

We’ve heard from so many people that used 8Ns (and 9N or 2N, or Jubilee tractors, etc.) and have fond memories. Many people have commented that those tractors were how they learned to drive! Great machines.

@bugger1649 3 месяца назад

Your video was great to watch I own a 9n love using it when I can, my tractor has its own personality when starting it I gotta pull out the choke cold start just little then push in the choke lever kinda a fast

@PurpleCollarLife 3 месяца назад

Thanks 👍. It's so funny how they each have their own quarks.

@marthathiel2419 11 месяцев назад

That was such an informative video for a new owner of an old 8N. Thank you

@PurpleCollarLife 11 месяцев назад

Glad you enjoyed it!

@PurpleCollarLife 11 месяцев назад

Please check out our other Ford 8N tractor videos: ru-vid.com/group/PLJy7cj0ut2cBWTStoVA1G_lfQ8hnhUtLu

@RockhillfarmYT 2 года назад

This is a well done video that provided value for me I watched this video when it was new and I watched it again today because I’m going to be running a Ford 8N tractor

@PurpleCollarLife 2 года назад

Thanks for watching it again, Brock! Feel free to ask any questions you have about that 8N you have.

@chris1638 3 года назад

Excellent content. Thanks for the help

@PurpleCollarLife 3 года назад

Glad it was helpful! Thanks for watching and commenting.

@dkat1108 5 месяцев назад

Fantastic video so helpful thanks !

@PurpleCollarLife 5 месяцев назад

Glad it was helpful! Thank you for watching and leaving a comment. We have several other Ford 8N videos (how to fix a driveway with a back blade, how to run a brush hog, etc.). Check them out if you have time.

@aplong1911 9 месяцев назад

I found this video very helpful, thank you for sharing!!😊

@PurpleCollarLife 9 месяцев назад

Glad it was helpful!

@neurospicywitch80 2 года назад

Great video, and beautiful tractor! The starting and operating procedure you went through for your 8N is pretty much the same as on my 1953 Ford NAA/Jubilee, the main difference being that the Jubilee has live hydraulics, so no need to have the PTO engaged. Other than that, it operates mostly the same. I’m in the process of installing all the lights on mine (didn’t have them when I bought it), and getting it ready to plow some snow here in southern WI. Liked and subscribed! ☺️

@PurpleCollarLife 2 года назад

Thanks 👍 I've always appreciated that the Jubilee upgraded to live hydraulics. Enjoy that snow! We're still waiting for some here in the "snow belt" of Pennsylvania.

@shensuohao 9 месяцев назад

I got a Jubilee a year or so ago, can’t get it fired up

@reka2591 3 месяца назад

Thanks for the well put together tutorial. My uncle has one of these and his instructions were less comprehensive.

@PurpleCollarLife 3 месяца назад

Thanks for watching and leaving the positive comment! We always hope our videos are informative and somewhat entertaining. Enjoy that old Ford tractor. There is nothing else like these old machines.

@carolmccullah473 Год назад

THANK YOU FOR THE VIDEO! I love my 8N! I have learned from trial and error so validation of what I have been doing AND learning a couple of new things!! My husband always did the brush hogging so when he passed, I had long distance tutorials from my dad via phone and visits. Unfortunately, he has now passed as well so these types of videos are extremely helpful. It is tough now when I have issues not having him to talk to to walk me through it!

@PurpleCollarLife Год назад

We really appreciate your comment! We always hope that our videos are both informative and entertaining (helpful)! Sorry to hear about your husband and your father, but glad to know that you’re still using the 8N and enjoying it!

@jchlawncare5730 Год назад

Love mine as well

@carolmccullah473 Год назад

@@PurpleCollarLife For the second time since I owned it, the coil was the problem and both times, I bought a new one and it was bad. I don't know why there is a problem with new coils but both times, because of my limited mechanical knowledge, I paid to have it repaired. Should it happen again, that will be one of the first things I try. :)

@bradgoldsmith9373 4 месяца назад

Great video.thank you for easy to follow,useful information.

@PurpleCollarLife 4 месяца назад

Glad it was helpful! We always hope our videos are informative and entertaining.

@loggerjohn01 3 года назад

They are a great little tractor!

@PurpleCollarLife 3 года назад

You got that right!

@photocontrol 3 года назад

Nice Ford 8N! Great tutorial, congrats reaching 3K!

@PurpleCollarLife 3 года назад

Thanks! 👍

@rynop8864 2 года назад

Just bought my first 9n it's a 1940 fun great, great video. Go Bills!! Mafia here from western ny!!

@PurpleCollarLife 2 года назад

Hello fellow Bills fan! You're going to love that 9N.

@JourneyNorthAK 3 года назад

I've got plenty of time in rebuilding and working on and driving a 9n.. nice old tractors.

@PurpleCollarLife 3 года назад

Very nice!

@k6outdoors 3 года назад

Such a neat old tractor, HST's have there place. sometimes there is just nothing better than some good old gears!

@PurpleCollarLife 3 года назад

You got that right!

@voyager7 9 месяцев назад

Very informative, ty!!

@PurpleCollarLife 9 месяцев назад

Glad you enjoyed it!

@bcdieselsofficial 3 года назад

I have one of these, and I make videos on it once in a while. Still runs like a champ!

@PurpleCollarLife 3 года назад

They're amazing machines. Thanks for watching and commenting. We plan on having this 8N forever.

@PurpleCollarLife 3 года назад

Checked out your channel. That's a beautiful 8N you have.

@bcdieselsofficial 3 года назад

@@PurpleCollarLife no problem! I plan on having my 8N forever as well! My father badmouths it, as it is a knee banger, but it is not as rough as the 7140 I have to drive in the field. He yells at me for badmouthing that tractor.

@bcdieselsofficial 3 года назад

@@PurpleCollarLife thank you!

@loggerjohn01 3 года назад

They are a great little tractor

@PurpleCollarLife 3 года назад

Absolutely! Thanks for watching and commenting.

@robp9696 2 года назад

Very informative. Thanks.

@PurpleCollarLife 2 года назад

Glad it was helpful! Thanks for watching and commenting. Do you have a Ford tractor?

@robp9696 2 года назад

@@PurpleCollarLife No sir, we have a gray-market Yanmar, but I know of an early 8N with the points up front thats near by our home. The owner is asking $2500

@RCAFpolarexpress 3 года назад

Great antique tractor Sir 😉👍 Glass bowl filter are neat 👍😉 Great start introduction sequence Sir 👍😉 Great video Sir 👍😉 Cheers !!!

@PurpleCollarLife 3 года назад

Thanks 👍

@RCAFpolarexpress 3 года назад

@@PurpleCollarLife 😉👍

@robpottenger9002 2 месяца назад

Great video! Looking forward to getting started with my 1952 Model!

@PurpleCollarLife 2 месяца назад

You're going to have a lot of fun! The other 8N that started new on the family land here is a 1952. It currently is across the road at the neighbor's house.

@robpottenger9002 2 месяца назад

@@PurpleCollarLife What is the normal HP for the 52 8N? Thanks

@PurpleCollarLife 2 месяца назад

@@robpottenger9002 I usually figure around 23-27 hp - depending on if you’re talking about drawbar HP or PTO HP.

@tracirussell8036 Месяц назад

Good Video Thanks!

@PurpleCollarLife Месяц назад

Glad you liked it!

@thomasblackwell9507 Год назад

Great video!

@PurpleCollarLife Год назад

Glad you enjoyed it!

@cipherthedemonlord8057 2 года назад

Great video working on one of these I found in an abandoned house.

@PurpleCollarLife 2 года назад

Very cool! Let us know how it goes. Is it the 8N model?

@cipherthedemonlord8057 2 года назад

@@PurpleCollarLife Yes all there motor is stuck so sprayed penetrating oil down the cylinders and drained the oil. Poured some diesel in to breakup any sludge.

@barking.dog.productions1777 Год назад

I'm loving this video - I have an 8N 9N tractor and I wasn't sure what all of the levers did. I bought a new 6 volt battery and it didn't even turn over but it will if I jump directly to the starter, hopefully! 🤣 Just trying to get this thing running... it has sat out in the weather sooooo loooong - haha I bought it not running, but supposedly freshly rebuilt - if not I have been an auto mechanic for years so I will sort it out eventually

@PurpleCollarLife Год назад

Great to hear! You're going to love working on that tractor, and then using it once you get it running. They're fairly simple machines. And with your mechanical experience, I'm sure you'll have no trouble. Keep us posted! I enjoy reading the comments about what people are doing with their classic Ford tractors!

@joedirt9600 3 года назад

I bought myself a 1949 8n for my birthday this year..

@PurpleCollarLife 3 года назад

That's a great birthday present! You'll love it. The 8N is such a reliable workhorse. It's also fun to drive and easy to learn.

@damianojeda7017 11 месяцев назад

Great video

@PurpleCollarLife 11 месяцев назад

Thanks! We’re glad you enjoyed it. We have an entire playlist of Ford 8N videos.

@badassbees3680 11 месяцев назад

Great job! Subbed

@PurpleCollarLife 11 месяцев назад

Awesome, thank you!

@wavekube4343 2 года назад

Very nice video, your voice is clear and easy to understand, the information concise, the video shots well thought out, and well placed, nice music, good job. i would like to see a video about the barn that the tractor is stored in. How it was built , who built it and when, what the history of uses have been where the lumber was acquired from, with a video tour of course.

@PurpleCollarLife 2 года назад

Thank you very much! Maybe we'll do a video on that barn sometime this spring or summer. Thanks for the idea.

@jakinlfiles9869 Год назад

This was well done and helpful. I have a 9n I am trying to get running and it was nice to see a similar model in action. Thanks.

@PurpleCollarLife Год назад

Glad you liked it! Keep us posted. How long have you had the 9N? How long since it was last running?

@jakinlfiles9869 Год назад

@@PurpleCollarLife Well, we got it a few years back from someone who had been working on it. I believe he had it working but don't remember for sure. But, the tractor needed a new PTO oil seal and bearing. And I think something is wrong with the radiator. But we got busy and never got time to fix it. So now I've got some time and kind of need it working for the farm. So I'm hoping to get it going soon!

@PurpleCollarLife Год назад

@@jakinlfiles9869 that’s awesome! Keep us posted. We love hearing about these old tractor projects.

@jakinlfiles9869 Год назад

@@PurpleCollarLife I'll try to do that! Do you have a suggested place to order parts for a 9n? I have found some online but just wondering if you know of some that might be better. Thanks

@PurpleCollarLife Год назад

@@jakinlfiles9869 Steiner tractors or Dan and Rachel Gingell

@funnrun3399 11 месяцев назад

My Father has a 48 8n ford nicely restored runs great he rakes hay with the little ford that nickname has been on it since it arrived probably because my grandfather Jimmy had a Fordson major and both tractors are different in size its a family heirloom purchased in 1956 in Toronto from a rich family

@PurpleCollarLife 11 месяцев назад

Very cool!

@Master-cutclean 2 года назад

Very nice !! Tractor 🚜

@PurpleCollarLife 2 года назад

Thanks 👍

@Smithsgold 3 года назад

Congrats on 3000 subs

@PurpleCollarLife 3 года назад

Thank you! We really appreciate the support.

@HuserHelpers 3 года назад

Your intro music reminds me of Old Crow. Great video, and keep up with the channel growth.

@PurpleCollarLife 3 года назад

Thanks! We're not familiar with Old Crow, but we did really like this music. Thanks on the compliments!

@randyperfecto7468 2 года назад

Just bought one for 2 grand love it

@PurpleCollarLife 2 года назад

They're excellent work tools. Sounds like you found a nice deal on one! Enjoy and keep us posted what all you use it for. Sometimes I enjoy using our 8N for nothing more than a nice stroll through the woods on the old logging roads.

@randyperfecto7468 2 года назад

@@PurpleCollarLife will do sir

@sargepent9815 8 месяцев назад

They also need a lead substitute in the fuel. The one I just rebuilt had damage to the valve seats from running regular gas at a guys hobby farm

@PurpleCollarLife 8 месяцев назад

Great point! We bring that up in this video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-5BrCSirsR-A.html

@hartleyhomesteadmichigan6041 3 года назад

Nice tractor! I have my Dad’s ‘49 9n. I converted it over to 12 volt and gave it an electronic ignition.

@PurpleCollarLife 3 года назад

Isn't the 12V conversion amazing?! Starts faster and easier, lights are brighter, and ignition is more reliable. How was the electronic ignition conversion? Pretty simple?

@hartleyhomesteadmichigan6041 3 года назад

@@PurpleCollarLife yes pretty much remove the points and condenser and pop in the electronic ignition. Don’t have to worry about timing.

@javiergutierrez7136 2 года назад

Tengo un 9n que mi padre(+) compro,y lo conservo. Cómo puedo cambiar a encendido electrónico. No fácil consigo platinos originales acá,en tamps.MX.

@zakbrown7859 2 месяца назад

Doing a clutch and pressure plate and bearing in one in the next couple weeks wish me luck!

@PurpleCollarLife 2 месяца назад

You can do it! Keep us posted. Is it at the point where it's grinding gears when you try to put it in gear?

@zakbrown7859 2 месяца назад

@@PurpleCollarLife no but the throw out bearing when engaged sounds not to good , clutch takes a good 5 seconds to engage also, like the pressure plate or clutch is wore pretty good, she runs great though

@CmonHomesteading 3 года назад

good stuff C'mon! i use to love my 8N

@PurpleCollarLife 3 года назад

Same here!

@FromSteelToWood 3 года назад

Great video! I guess my 1962 Case 430 (gasoline engine) goes into that old tractor category! Lol! It's true, each tractor has its personality. Mine will start like your 9N, even below zero temperatures. No choke to crank, 100% choke at start, then slowly removing choke (if very cold). Runs without choke in 10-20 seconds. Then my much newer (!) 1979 Bolens needs its choke proportional to the coldness! Will prefer to be choked for 1-2 minutes to warm up. Won't need to choke in summer. Another good parking brake is to leave the tractor in gear... until it's steep enough to crank the engine (don't ask me why I know that...). So beware of that method! Thanks!

@PurpleCollarLife 3 года назад

Joe - thanks for sharing the personality of your tractors, and your starting experiences. I find it really interesting. The same thing with old vehicles. I had a 1983 Ford Bronco with the straight 6 engine (carbureted). That Bronco would start every time - as long as you pumped the gas exactly twice first. If you didn't pump it, held the gas pedal down at any %, or over pumped it - good luck! :)

@thomastrybuskiewicz9024 Год назад

Go Bills from youngsville NC! I just got me an 8n and just trying to figure it out

@PurpleCollarLife Год назад

Thanks for watching! You're going to love your 8N. We have several videos about using ours (back blade, brush hog, pushing snow, etc.).

@tornadochasingsiege 10 месяцев назад

My dad has got a really really old ford 8N and i really really want to learn how to operate it and now i know

@PurpleCollarLife 10 месяцев назад

So glad to hear the video was helpful! Is your 8N like ours, with the font-mount distributor in the front against the fan? Or is it the "newer" version of the 8N, with the side-mount distributor?

@Snodude_ 3 года назад

Great video New sub

@PurpleCollarLife 3 года назад

Thanks for the sub! Welcome!

@MsPribbenow 5 месяцев назад

This man has a white cat! (Ha - recognize those little tufts of fur at the first of the video - I get that too). Good video. Borrowing a neighbor's 8N while my tractor is being serviced and used this to double check the gear shift pattern. Can't read it on his housing.

@PurpleCollarLife 5 месяцев назад

You are right! There is a barn cat that keeps the mice away. :)

@born2soon Год назад

I learned recently that you can pull up on the gearshift and swing it out of the way to get on board with big boots on. Henry Ford thought of everything! (Fresh Autolite plugs have me cruising at 28mph on the road.)

@PurpleCollarLife Год назад

I've heard of this only a couple times. I've personally never tried it. I've read that sometimes it can be nearly impossible to get back into place. Thanks for the tip on the Autolite plugs!

@born2soon Год назад

@@PurpleCollarLife I was told there is a roll pin that can move to one side and prevents it from snapping back in place. I suppose if you did it several times that might happen.

@PurpleCollarLife Год назад

@@born2soon Thanks!

@joebolling 3 года назад

Thanks - had no idea my 8N has somewhat of a parking brake

@PurpleCollarLife 3 года назад

Thanks for commenting, Joe. You'd be surprised how many people don't realize it. Don't worry- you're not the first. :) They don't work great, but they are better than nothing at all.

@doylerabjohn3435 2 года назад

Thanks, I have a 9n/2n with 8n engine. She needs some attention

@PurpleCollarLife 2 года назад

They do need attention from time to time. But once you get them in good running order, they're super reliable. They do like to be run regularly though. We make sure the 8N is used at least once a week, even if it's just for a trip up and down the driveway to get the mail.

@doylerabjohn3435 2 года назад

@@PurpleCollarLife Thanks

@carljensen5730 2 года назад

You are right they are all different. I have to open the gas line 12 turns or no gas goes through.

@PurpleCollarLife 2 года назад

Wow - 12 turns! That's a lot. I remember that on the 2N, I had to open that valve up a lot more than 2 turns. I think I opened it almost all the way. But eventually, I figured out that the little screen above the sediment bowl (the one up in the gas tank) was totally clogged. Once I cleaned that out, it only took a few turns to get enough gas flowing to the carbureator.

@jameschainey2343 4 месяца назад

I have seen so many tractor programsalmost everyone shut the fuel off it has to turn it back on I was on a farm for 23 years never done that never had trouble also I've noticed a lot of people do not you have any throttle when they try to start it and They crank at crank also the life of a battery nowadays are some of these older tbattery last 2 to 3 years Our batteries would last 5 to 8 years😊

@PurpleCollarLife 3 месяца назад

Thanks for watching!

@f1948s 2 года назад

Excellent video. Thanks for all the good information. Can you tell me what air pressure you use in the front and rear wheels of your 8N tractor?

@PurpleCollarLife 2 года назад

Hello! We keep the rears at 12 psi, and the fronts at 25 psi. We make sure to only fill/check the rear tires when the valve stems are at the top (12 O'clock position) so that the fluid doesn't leak out or plug up the pressure gauge. Thanks for watching!

@knuckle47 Год назад

Thoroughly enjoyed learning how to operate the 8N. You got a new subscriber …thank you. How would a bucket operate if one was attached to the front?

@PurpleCollarLife Год назад

Thanks for the sub! I've never had a loader on one of these old Ford tractors - so I'm not sure how they operate. I would guess that the PTO would have to be running to pump the hydraulic oil, and that there would be a lever that would direct that pressure to the cylinders for lifting the arms and tilting the bucket. Hopefully someone else on here can help out by responding to your comment. Thanks for watching and leaving a comment!

@scottsatterthwaite4073 2 года назад

The older Ford tractors (are supposed to) have a screw-on PTO guard/cap that should be in place unless you have a driven implement attached.

@PurpleCollarLife 2 года назад

Hi Scott - that's true. And we do have the screw on PTO cap for the tractor. However, with the overrunning PTO extension on (for running the brush hog, a finish mower etc.), that screw on PTO cap doesn't fit anymore. Thanks for watching!

@bennyrussell5551 9 месяцев назад

Ours didn't

@clifton4566 Год назад

My dad had one that's been sitting at the back of my yard since he passed away a little over a year and a half ago. I know he'd gotten it to start, but it still needed a good bit of work to actually use it. I'm real sentimental so I'd like to get it going again and at least finish off his project, but I have no idea where he left off and I have absolutely zero experience working on tractors.

@PurpleCollarLife Год назад

I am sentimental about these old tractors too! Hopefully you can take a look at it and get it figured out - or find someone who can help.

@TS-sx3rf 3 года назад

There is a cap or cover that goes over the power take off but because we have the over running shaft on the tractor the cover won't fit. The over running shaft or clutch is needed for the brush hog or finish mower.

@PurpleCollarLife 3 года назад

Good point - the over-run PTO extension makes the original safety cap not fit on the N series tractors. Those caps are very difficult to find on these older tractors. Most of them have lost the PTO cover cap somewhere along the last 70 years, or have been converted to the over-running PTO like this one.

@derevenskayazhizn 3 года назад

Мне лично очень нравится старая техника , у меня был только мотоцик 50 годов наш советский Иж планета 49

@PurpleCollarLife 3 года назад

Hello, Victor! Thanks for watching and commenting. I agree that these old machines have a lot of character and are really interesting. I looked up your motorcycle - the Soviet IZH 49 - it looks like a really nice old bike. Thanks for sharing!

@jakelencher817 2 года назад

so i kinda ended up with an 8n in pretty good condition with a property, havent had the chance to mess with it yet but its gonna be fun i bet.

@PurpleCollarLife 2 года назад

Jake - Congrats on the property, and the Ford 8N tractor. You'll have fun with it, I'm sure. Keep us posted on it. Does it start up and run right now, or does it need some work?

@jakelencher817 2 года назад

@@PurpleCollarLife i assume it probably needs work but the only time i saw it was when we went to look at the property, so i dont know if it starts or anything, there is also an old farmall f12 i think, but its real rusty, i will try to restore that but it may be done for.

@WhoDaBoss-dc4or 3 года назад

I want a close up look at those front weights !

@PurpleCollarLife 3 года назад

Hello - I believe they're weights from an old nautilus-style weight set, bolted down through the front hitch with some supports. There might be a better view of them in one of these videos: Wash and wax 8n: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-r737ABxzLgo.html Brush hog in right-of-way: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-iWUnhIh34AE.html Clearing the woods line: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-G1a8pPMTczA.html Ford 8N story and review: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Y8LcQbfueSY.html Thanks for watching and commenting!

@tomrobards7753 Год назад

They had a pto cap that was supposed to be installed when the pto wasn't being used to power a pto driven implement

@PurpleCollarLife Год назад

Hi Tom - we still have that PTO cover cap. Not many of these old 9N 2N and 8N tractors still have them. But unfortunately, in order to take advantage of the overrunning coupler (clutch on the PTO), you have to mount that overrun clutch over top of the existing PTO shaft. Once that overrun clutch is on, the OEM PTO cap will no longer screw into place.

@michaelbishop6831 2 года назад

We inherited an 8N, with Wagner loader. I’ll look for videos on the loader operation.

@PurpleCollarLife 2 года назад

I’ve never used one of the Wagner loaders. But I’ve seen plenty of old 8N, 2N, 9N, and even Jubilee machines that run those loaders. Let us know how it goes! Congrats on the 8N.

@michaelbishop6831 2 года назад

@@PurpleCollarLife the tractor has sat next to the barn for years. No telling what it will take to get it running but it will be a labor of love. My recently deceased father in law bought it in 1972 and used it often.

@Crystallinegoddess57 3 года назад

Just purchased my 50’s baby today! Great tutorial! Where do I find that scoop thing in the back of yours? And is there a front scoop that I could install on mine?

@PurpleCollarLife 3 года назад

That's great! You'll love the tractor. The attachment on the back in this video is a 6-foot back blade. They can be found at places like Tractor Supply, Rural King, or most tractor dealers (or garage sales if you look for them). There is a front plow that can go on the Ford 8N, but they're pretty rare.

@davelohr2637 3 года назад

There's a lever under the right side of the seat, beside the drag lever, what is it used for? Thanks for the video, I learned something new with the parking brake!

@PurpleCollarLife 3 года назад

Thanks for watching! That small lever under the right of the seat (only on 8N tractors) is for a draft control - used mostly for using a bottom plow. I've never used it on ours. I think it's designed to allow the arms to "float" when plowing, so that if it starts to dig in too deep, or hits a rock or bump, it can raise up a little, and then return. I've read about some people trying to use it-figure it out. It looks like it's for ground-engaging equipment.

@henrysosebee9241 2 года назад

I have 6 8n’s l like these old tractorand I see on your top link behind the seat is in the top hole wrong mess up your lift top hole for plowing only

@PurpleCollarLife 2 года назад

Thanks, Henry. I learned something new today. I didn't realize that the 3 top link positions had different purposes. Thanks for teaching me!

@LivadaBio 3 года назад

👍Like !!!

@PurpleCollarLife 3 года назад

Thanks for the visit

@CrankingYanking 3 года назад

I have this same tractor. Later model side mount, still runs like a top

@PurpleCollarLife 3 года назад

Hi Cranking & Yanking - they're outstanding machines.

@ksanches Год назад

Great video. Just was curious what the little short lever is tucked up under the right side of the seat, next to the draft lever. Just bought mine today and have no idea yet what that is. Thanks.

@PurpleCollarLife Год назад

@ksanches Год назад

@@PurpleCollarLife Thank you.